# Page rendering vs. Nextion Editor `python -m nxhmi render project.HMI out/` draws every page the way Nextion Editor 1.68 shows it on its canvas. Verified by capturing the Editor's canvas at 100 % zoom and comparing pixel by pixel (ignoring the Editor's yellow name tags and its 2-px selection outline). ## Results The demo project (`demo/demo.HMI`, built by `examples/make_demo.py`): | Page | Differing pixels | Notes | |---|---|---| | home | 25 | name-tag edges (checkbox, buttons) | | controls | 5 | name-tag edges | | gallery | 1 | name-tag edge | A real 6-page user project (pictures, 32-px bitmap font, texts, 3D buttons, sliders): every page pixel-identical apart from 0-5 px at name-tag edges. Per component (dedicated test pages): | Component | Match | Notes | |---|---|---| | text (all xcen/ycen, solid / crop / image background, border, 3D up/down) | 100 % | | | text with word wrap | 100 % | the text block is aligned as a whole, lines left-aligned in it | | number (plain, fixed length, hex, currency, negative), xfloat | 100 % | | | button, dual-state button (colour and picture skins, on/off) | 100 % | "on" with 3D style is drawn pressed (3D down) | | scrolling text (static) | 100 % | | | progress bar (horizontal, vertical, picture mode) | 100 % | | | slider (horizontal, vertical, auto cursor, picture background and cursor) | 100 % | auto cursor = square as thick as the slider; position truncates | | checkbox (3D down, border, flat) | 100 % | | | picture, crop (also smaller than the component) | 100 % | only the picture's real area is drawn | | waveform (frame + grid) | 100 % | horizontal grid lines count from the bottom | | gauge (every angle, needle width 1-8, odd/even/non-square sizes) | 100 % | the needle routine, see below | | radio (all sizes, also non-square) | 100 % | the display's own circle routine, see below | | QR code (byte/alphanumeric/numeric text, versions 1-8, margins, colours, logo, Latin-1) | 100 % | own encoder (`nxhmi.qr`), see below | | hotspot, touch cap, timer, variable | nothing drawn (same as the Editor) | | ## Rules learned from the Editor - Text never starts above/left of its box: centring clamps at 0 (a 32-px font in a 30-px box starts at the top). - Text is laid out inside the border: 1 px for 3D styles, `borderw` for style "border". - 3D colours are fixed: light (230,226,230), dark (65,68,65) -- top/left light for 3D up/auto, dark for 3D down. - Buttons with a picture background (`sta` crop or image) get no frame. - Pictures are pasted at their real size; a smaller picture leaves the rest untouched. - Checkbox: `bco` fill, `style` frame, checked = `pco` square from w/4 to 3w/4. - Radio: circle sized by the component *width* (clipped to the box); ring radius `r = (w-1)//2` around `(r, r)`, colour (65,68,65), filled with `bco`; checked = `pco` dot of radius `r // 2`. - Circles (radio, and the display's `cir`/`cirs` commands): incremental midpoint routine -- start at `x = r, y = 0`; plot the 8 symmetric points; `y += 1`; if `x*x - x + y*y + 2*y > r*r + 1` then `x -= 1`; repeat while `x >= y`. Filled circles are every pixel inside that ring. Verified for every radius 1..159 against the Editor's simulator. - Gauge needle (verified on 112 needles): centre `(w//2, h//2)`, length `h//2 - wid` (the *height* sets it, also for non-square gauges, so the needle can leave the box). Tip = centre + `(int(-len*cos a), int(-len*sin a))` with `val` in degrees, 0 = left, 90 = up, where sin/cos are taken after reducing the angle to 0..90 degrees (so `sin 30` is a hair under 0.5 and `24*sin 30` truncates to 11). The line runs from the tip to the centre: step the major axis, minor offset `(k*minor + minor - 1) // major`. Width > 1: every line pixel is stamped with a `wid` x `wid` square starting at `-(wid//2)`. - QR code: the text's bytes (iso-8859-1) encoded in numeric mode if all digits, alphanumeric if all in `0-9A-Z $%*+-./:`, else byte mode; error correction **L**, **mask 0** always, the smallest version that fits. Drawn into a square of `w - 2*dis` px at `(dis, dis)` -- sized by the width only and *not* clipped to `h`; pixel `p` shows module `p*N//size`. Dark runs are drawn column by column and the last one (last column, reaching the bottom) is one pixel narrower. Fewer pixels than modules or empty text: only the `bco` background. `sta` 1: picture `pic` pasted centred in the box. Big codes can exceed a Basic display's RAM (the Editor refuses to compile), the canvas still draws them. - Slider: auto cursor (255) is a square as thick as the slider; position = `int(frac * free)`. - Waveform: vertical grid lines from the left edge, horizontal ones counted from the bottom. Not covered yet: Intelligent-only components (need Intelligent picture format 4), anti-aliased fonts, pressed/runtime states.