Radio rendering pixel-exact: the display's circle routine

Harvested the cir/cirs output for every radius 1..159 from Nextion
Editor's simulator and derived the incremental midpoint rule that
reproduces all of them; radio = width-sized circle clipped to the box,
dot radius r//2. Basic rendering coverage 18/20.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-15 15:53:13 +01:00
1 parent 6f8341c66c
commit 9b50eea03f
7 files changed
+83 -14

No files matched your search

+2 -2
View File
@@ -42,5 +42,5 @@ Back up the user's file first (copy it) unless they said not to; edits write in
- Writes projects for Nextion Editor 1.68.2; the user still compiles/uploads the `.tft` with the
Editor (or Nexus for uploading). nxhmi cannot compile `.tft` files yet.
- Rendering: radio buttons are ~95 % exact, QR codes are a placeholder, Intelligent-only
components are not drawn.
- Rendering: QR codes are a placeholder, gauge needles can differ by a few pixels,
Intelligent-only components are not drawn.
+2 -2
View File
@@ -30,8 +30,8 @@ Every percentage is a count with a stated basis, so it can be checked (details i
| Picture formats | **50 %** (1/2) | raw RGB565 (Basic) done; compressed format (Intelligent) not yet |
| Font modes | **50 %** (1/2) | black/white done (incl. TrueType import); anti-aliased not yet |
| Readable attribute names in JSON | **65 %** (20/31 types) | value lists taken from the Editor for all Basic types; Intelligent-only types still raw numbers |
| Rendering, Basic components | **85 %** (17/20 pixel-exact) | gauge ~99.5 %, radio ~95 %, QR code placeholder |
| Rendering, all components | **55 %** (17/31 pixel-exact) | Intelligent-only components not rendered yet |
| Rendering, Basic components | **90 %** (18/20 pixel-exact) | gauge ~99.5 %, QR code placeholder |
| Rendering, all components | **58 %** (18/31 pixel-exact) | Intelligent-only components not rendered yet |
| `.tft` compilation | **31 %** (2.5/8 milestones) | layout mapped, layout table decoded, trailer checksum (same-length edits only); not usable yet |
## Compatibility
Binary file not shown.

Before

Width:  |  Height:  |  Size: 5.4 KiB

After

Width:  |  Height:  |  Size: 5.4 KiB

-1
View File
@@ -98,7 +98,6 @@ byte for byte, or a file written by nxhmi was opened in the Editor and showed th
### Rendering
| Item | Notes |
|---|---|
| Radio circle | ~93-97 %: outline/dot differ by +-1 px at some radii (in progress) |
| QR code | placeholder; needs the Editor's QR settings |
| Pressed / runtime states, Intelligent-only components | not drawn |
+10 -5
View File
@@ -10,7 +10,7 @@ The demo project (`demo/demo.HMI`, built by `examples/make_demo.py`):
| Page | Differing pixels | Notes |
|---|---|---|
| home | 94 | all in the two radio buttons and at name-tag edges |
| home | 30 | name-tag edges (checkbox) and gauge needle anti-aliasing |
| controls | 5 | name-tag edges |
| gallery | 1 | name-tag edge |
@@ -32,7 +32,7 @@ Per component (dedicated test pages):
| picture, crop (also smaller than the component) | 100 % | only the picture's real area is drawn |
| waveform (frame + grid) | 100 % | horizontal grid lines count from the bottom |
| gauge | 99.3 - 100 % | needle anti-aliasing differs by a few px |
| radio | ~93 - 97 % | circle outline/dot differ by +-1 px at some radii (work in progress) |
| radio (all sizes, also non-square) | 100 % | the display's own circle routine, see below |
| QR code | placeholder only | |
| hotspot, touch cap, timer, variable | nothing drawn (same as the Editor) | |
@@ -46,10 +46,15 @@ Per component (dedicated test pages):
- Buttons with a picture background (`sta` crop or image) get no frame.
- Pictures are pasted at their real size; a smaller picture leaves the rest untouched.
- Checkbox: `bco` fill, `style` frame, checked = `pco` square from w/4 to 3w/4.
- Radio: circle sized by the component *width* (clipped to the height); ring radius
`(w-1)//2`, colour (65,68,65), filled with `bco`; checked = `pco` dot.
- Radio: circle sized by the component *width* (clipped to the box); ring radius
`r = (w-1)//2` around `(r, r)`, colour (65,68,65), filled with `bco`; checked = `pco` dot of
radius `r // 2`.
- Circles (radio, and the display's `cir`/`cirs` commands): incremental midpoint routine --
start at `x = r, y = 0`; plot the 8 symmetric points; `y += 1`; if
`x*x - x + y*y + 2*y > r*r + 1` then `x -= 1`; repeat while `x >= y`. Filled circles are every
pixel inside that ring. Verified for every radius 1..159 against the Editor's simulator.
- Slider: auto cursor (255) is a square as thick as the slider; position = `int(frac * free)`.
- Waveform: vertical grid lines from the left edge, horizontal ones counted from the bottom.
Not covered yet: exact radio circles, QR codes, Intelligent-only components (need Intelligent
Not covered yet: QR codes, Intelligent-only components (need Intelligent
picture format 4), anti-aliased fonts, pressed/runtime states.
+50 -4
View File
@@ -21,6 +21,36 @@ from .page import Component, Page
from . import pictures
def circle_octant(r: int):
"""First octant (x >= y >= 0) of the display's circle routine -- reproduces the Nextion `cir`
command and the Editor canvas exactly (verified for every radius 1..159)."""
pts = []
x, y = r, 0
while x >= y:
pts.append((x, y))
y += 1
if x * x - x + y * y + 2 * y > r * r + 1:
x -= 1
return pts
def circle_points(r: int):
"""All points of a ring of radius r around (0, 0) (8-way symmetric)."""
pts = set()
for x, y in circle_octant(r):
for a, b in ((x, y), (y, x)):
pts.update({(a, b), (-a, b), (a, -b), (-a, -b)})
return pts
def disc_rows(r: int):
"""{dy: half-width} of a filled circle (Nextion `cirs`): every pixel inside the ring."""
rows = {}
for a, b in circle_points(r):
rows[b] = max(rows.get(b, 0), abs(a))
return rows
def rgb(v: int):
r, g, b = v >> 11, (v >> 5) & 63, v & 31
return (r << 3 | r >> 2, g << 2 | g >> 4, b << 3 | b >> 2)
@@ -326,12 +356,28 @@ class Renderer:
d.rectangle((x + w // 4, y + h // 4, x + 3 * w // 4 - 1, y + 3 * h // 4 - 1), fill=rgb(c.get("pco") or 0))
def radio(self, img, c):
from PIL import ImageDraw
"""Circle sized by the width, centred at ((w-1)//2, (w-1)//2), clipped to the box:
bco disc, ring (65,68,65), and when checked a pco dot of half the radius."""
x, y, w, h = self._box(c)
d = ImageDraw.Draw(img)
d.ellipse((x, y, x + w - 2, y + h - 2), fill=rgb(c.get("bco") or 0), outline=(65, 68, 65))
r = (w - 1) // 2
cx, cy = x + r, y + r
px = img.load()
W, H = img.size
def put(xx, yy, col):
if x <= xx < x + w and y <= yy < y + h and 0 <= xx < W and 0 <= yy < H:
px[xx, yy] = col
def fill(rad, col):
for dy, hw in disc_rows(rad).items():
for dx in range(-hw, hw + 1):
put(cx + dx, cy + dy, col)
fill(r, rgb(c.get("bco") or 0))
for dx, dy in circle_points(r):
put(cx + dx, cy + dy, (65, 68, 65))
if c.get("val"):
d.ellipse((x + w // 4, y + h // 4, x + 3 * w // 4 - 2, y + 3 * h // 4 - 2), fill=rgb(c.get("pco") or 0))
fill(r // 2, rgb(c.get("pco") or 0))
def gauge(self, img, c):
from PIL import ImageDraw
+19
View File
@@ -71,6 +71,25 @@ class Render(unittest.TestCase):
img = self.render(p)
self.assertEqual(img.getpixel((10, 0)), (65, 68, 65)) # dark top edge when on
def test_circle_routine(self):
from nxhmi.render import circle_octant, disc_rows
# measured from the Editor simulator (`cir 240,160,39,0`)
self.assertEqual(circle_octant(39), [(39, 0), (39, 1), (39, 2), (39, 3), (39, 4), (39, 5), (38, 6), (38, 7),
(38, 8), (38, 9), (37, 10), (37, 11), (37, 12), (36, 13), (36, 14), (36, 15),
(35, 16), (35, 17), (34, 18), (34, 19), (33, 20), (32, 21), (32, 22), (31, 23),
(30, 24), (29, 25), (28, 26), (27, 27)])
self.assertEqual(circle_octant(13)[-1], (9, 9)) # diagonal point kept
self.assertEqual(disc_rows(19)[19], 3)
def test_radio(self):
p = C.new_page("p", w=100, h=100)
C.add(p, "radio", x=0, y=0, w=80, h=80, val=1, bco=0xFFE0, pco=0x001F)
img = self.render(p)
self.assertEqual(img.getpixel((0, 39)), (65, 68, 65)) # ring, radius 39 around (39, 39)
self.assertEqual(img.getpixel((39, 39)), (0, 0, 255)) # dot radius 19
self.assertEqual(img.getpixel((39 + 19, 39)), (0, 0, 255))
self.assertEqual(img.getpixel((39 + 20, 39)), (255, 255, 0))
def test_demo_pages_render(self):
from nxhmi.render import Renderer
r = Renderer(HMIFile.load(FIXTURE))