Files
nixie-clock/firmware/uniclock
mangavalkandClaude Opus 5.5 b40b5f680c Replace the web UI with a single-file page
The upstream jQuery page (147 KB, 3-column grid, slider values hidden,
help behind label clicks, no save feedback) is replaced by
firmware/uniclock/web/index.html: one file, no jQuery, gzipped by
web/gzip_web.py to data/index.html.gz (12 KB) before every build.

- Tabs Home / Tubes / Light / Network / System, rows with label, help
  line and control; sliders always show their value
- "Saved" / "Not saved" after each change, reverted on failure; offline
  indicator with automatic retry (the old poll stopped after one error)
- WiFi and MQTT settings only save with a Save button, then offer a
  restart; password fields are write-only
- Controls for hardware this clock lacks (alarm, radar, sensors) hidden
- Runs on sample data when opened from disk

Firmware: one serveStatic route (gzip, no-cache + ETag) replaces the
per-file routes; /getConfiguration no longer returns passwords and adds
ip, hasAlarm, hasRadar and the real cathProtMin; /getCurrentInfos adds
currentSec and mqtt state and sends "lux" instead of "lx" when there is
no sensor; /cathodeProtect and /firmwareupdate now answer.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 00:06:35 +01:00
..
2026-10-25 21:37:25 +01:00

ESP_UniClock for the NixieIN12v2 clock

Firmware for this clock, based on ESP_UniClock by Peter Gautier (GPL-3.0-or-later), vendored from upstream commit 1189810 (2026-09-07).

  • ESP32_UniClock2/: the upstream sketch folder (all .ino/.h files; data/ is the SPIFFS content). It keeps the upstream layout, so it still opens in the Arduino IDE.
  • web/index.html: the web UI (replaces the upstream jQuery page), one file with its CSS and JS. web/gzip_web.py gzips it to data/index.html.gz; PlatformIO runs it before every build, in the Arduino IDE run python web/gzip_web.py before uploading the data folder. Opened straight from disk, the page runs on sample data, so layout changes can be checked without the clock.
  • lib/: the library versions bundled upstream (libraries/*.zip), only those the ESP8266 build needs. The upstream manuals, datasheets, photos and ESP32-only libraries were left out. Exception: arduino-home-assistant is v2.1.0 (upstream bundles 1.3.0, which has no light, number, select or button entities); mqtt.ino was rewritten for it.
  • platformio.ini: PlatformIO build for the ESP-12 (4 MB flash, 2 MB SPIFFS).

Local changes are separate commits on top of the import (git log -- firmware/uniclock).

Build and flash

pio run                      # build
pio run -t upload            # flash the firmware over COM7
pio run -t uploadfs          # flash the web UI (data/) to SPIFFS; over WiFi: -e nixie_in12_ota
pio device monitor           # serial log, 115200 Bd

The CH340C adapter has no auto-reset: before each upload, hold GPIO0 to GND, tap RST to GND, then release GPIO0. See CLAUDE.md in the repo root for the wiring.