The first NTP attempt after boot usually fails and the retry waited a flat 5 minutes, so the clock showed 00:00 (1970) for 5 minutes after every restart or OTA update. Retries now back off 15 s, 30 s, 1 min ... up to 5 min. Measured after an OTA update: time set at 30 s uptime. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ESP_UniClock for the NixieIN12v2 clock
Firmware for this clock, based on ESP_UniClock by
Peter Gautier (GPL-3.0-or-later), vendored from upstream commit 1189810 (2026-09-07).
ESP32_UniClock2/: the upstream sketch folder (all.ino/.hfiles;data/is the SPIFFS content). It keeps the upstream layout, so it still opens in the Arduino IDE.web/index.html: the web UI (replaces the upstream jQuery page), one file with its CSS and JS.web/gzip_web.pygzips it todata/index.html.gz; PlatformIO runs it before every build, in the Arduino IDE runpython web/gzip_web.pybefore uploading the data folder. Opened straight from disk, the page runs on sample data, so layout changes can be checked without the clock.lib/: the library versions bundled upstream (libraries/*.zip), only those the ESP8266 build needs. The upstream manuals, datasheets, photos and ESP32-only libraries were left out. Exception:arduino-home-assistantis v2.1.0 (upstream bundles 1.3.0, which has no light, number, select or button entities);mqtt.inowas rewritten for it.platformio.ini: PlatformIO build for the ESP-12 (4 MB flash, 2 MB SPIFFS).
Local changes are separate commits on top of the import (git log -- firmware/uniclock).
Build and flash
pio run # build
pio run -t upload # flash the firmware over COM7
pio run -t uploadfs # flash the web UI (data/) to SPIFFS; over WiFi: -e nixie_in12_ota
pio device monitor # serial log, 115200 Bd
The CH340C adapter has no auto-reset: before each upload, hold GPIO0 to GND, tap RST to GND, then
release GPIO0. See CLAUDE.md in the repo root for the wiring.