New "Wake at night" setting (prmExt.wledWakeAtNight, web UI only): while WLED frames arrive, the night schedule is ignored and the clock runs as by day. Night mode returns as soon as the frames time out. The manual night toggle, radar and HA Tubes switch still win. The field uses the former padding byte of prmExt; MAGIC_VALUE_EXT is now 0x5702 and 0x5701 settings are migrated, so existing SignalRGB settings are kept. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ESP_UniClock for the NixieIN12v2 clock
Firmware for this clock, based on ESP_UniClock by
Peter Gautier (GPL-3.0-or-later), vendored from upstream commit 1189810 (2026-09-07).
ESP32_UniClock2/: the upstream sketch folder (all.ino/.hfiles;data/is the SPIFFS content). It keeps the upstream layout, so it still opens in the Arduino IDE.web/index.html: the web UI (replaces the upstream jQuery page), one file with its CSS and JS.web/gzip_web.pygzips it todata/index.html.gz; PlatformIO runs it before every build, in the Arduino IDE runpython web/gzip_web.pybefore uploading the data folder. Opened straight from disk, the page runs on sample data, so layout changes can be checked without the clock.lib/: the library versions bundled upstream (libraries/*.zip), only those the ESP8266 build needs. The upstream manuals, datasheets, photos and ESP32-only libraries were left out. Exception:arduino-home-assistantis v2.1.0 (upstream bundles 1.3.0, which has no light, number, select or button entities);mqtt.inowas rewritten for it.platformio.ini: PlatformIO build for the ESP-12 (4 MB flash, 2 MB SPIFFS).
Local changes are separate commits on top of the import (git log -- firmware/uniclock).
Build and flash
pio run # build
pio run -t upload # flash the firmware over COM7
pio run -t uploadfs # flash the web UI (data/) to SPIFFS; over WiFi: -e nixie_in12_ota
pio device monitor # serial log, 115200 Bd
The CH340C adapter has no auto-reset: before each upload, hold GPIO0 to GND, tap RST to GND, then
release GPIO0. See CLAUDE.md in the repo root for the wiring.