Commit Graph
3 Commits
Author SHA1 Message Date
mangavalkandClaude Opus 5.5 b40b5f680c Replace the web UI with a single-file page
The upstream jQuery page (147 KB, 3-column grid, slider values hidden,
help behind label clicks, no save feedback) is replaced by
firmware/uniclock/web/index.html: one file, no jQuery, gzipped by
web/gzip_web.py to data/index.html.gz (12 KB) before every build.

- Tabs Home / Tubes / Light / Network / System, rows with label, help
  line and control; sliders always show their value
- "Saved" / "Not saved" after each change, reverted on failure; offline
  indicator with automatic retry (the old poll stopped after one error)
- WiFi and MQTT settings only save with a Save button, then offer a
  restart; password fields are write-only
- Controls for hardware this clock lacks (alarm, radar, sensors) hidden
- Runs on sample data when opened from disk

Firmware: one serveStatic route (gzip, no-cache + ETag) replaces the
per-file routes; /getConfiguration no longer returns passwords and adds
ip, hasAlarm, hasRadar and the real cathProtMin; /getCurrentInfos adds
currentSec and mqtt state and sends "lux" instead of "lx" when there is
no sensor; /cathodeProtect and /firmwareupdate now answer.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 00:06:35 +01:00
mangavalkandClaude Opus 5.5 9a7061383c Add Home Assistant controls over MQTT
Upgrade ArduinoHA from 1.3.0 to 2.1.0 and rewrite mqtt.ino for it.
The clock now shows up in Home Assistant (discovery prefix
"homeassistant") with:
- switches Tubes (blank the display, runtime only) and Auto dim
- numbers Day/Night brightness
- light Backlight (on/off, brightness, RGB mapped to the colour wheel)
- select LED effect, button Cathode protect
- sensors Light (LDR) and WiFi signal, plus the upstream sensors when
  the clock has them; master-clock subscriptions are kept

Settings changed from HA are saved to EEPROM 3 s after the last change.
Fixes the unbounded memcpy in the MQTT message handler.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:37:25 +01:00
mangavalkandClaude Opus 5.5 b347f1c63f Import ESP_UniClock (upstream 1189810)
Vendored from https://github.com/gpeter62/ESP_UniClock: the sketch
source, the web UI and the libraries the ESP8266 build needs, unpacked
from the bundled zips. Adds a PlatformIO project for the ESP-12. The
source is unchanged; local changes follow as separate commits.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 20:48:04 +01:00