The upstream jQuery page (147 KB, 3-column grid, slider values hidden,
help behind label clicks, no save feedback) is replaced by
firmware/uniclock/web/index.html: one file, no jQuery, gzipped by
web/gzip_web.py to data/index.html.gz (12 KB) before every build.
- Tabs Home / Tubes / Light / Network / System, rows with label, help
line and control; sliders always show their value
- "Saved" / "Not saved" after each change, reverted on failure; offline
indicator with automatic retry (the old poll stopped after one error)
- WiFi and MQTT settings only save with a Save button, then offer a
restart; password fields are write-only
- Controls for hardware this clock lacks (alarm, radar, sensors) hidden
- Runs on sample data when opened from disk
Firmware: one serveStatic route (gzip, no-cache + ETag) replaces the
per-file routes; /getConfiguration no longer returns passwords and adds
ip, hasAlarm, hasRadar and the real cathProtMin; /getCurrentInfos adds
currentSec and mqtt state and sends "lux" instead of "lx" when there is
no sensor; /cathodeProtect and /firmwareupdate now answer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Upgrade ArduinoHA from 1.3.0 to 2.1.0 and rewrite mqtt.ino for it.
The clock now shows up in Home Assistant (discovery prefix
"homeassistant") with:
- switches Tubes (blank the display, runtime only) and Auto dim
- numbers Day/Night brightness
- light Backlight (on/off, brightness, RGB mapped to the colour wheel)
- select LED effect, button Cathode protect
- sensors Light (LDR) and WiFi signal, plus the upstream sensors when
the clock has them; master-clock subscriptions are kept
Settings changed from HA are saved to EEPROM 3 s after the last change.
Fixes the unbounded memcpy in the MQTT message handler.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Vendored from https://github.com/gpeter62/ESP_UniClock: the sketch
source, the web UI and the libraries the ESP8266 build needs, unpacked
from the bundled zips. Adds a PlatformIO project for the ESP-12. The
source is unchanged; local changes follow as separate commits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>