Replace the web UI with a single-file page

The upstream jQuery page (147 KB, 3-column grid, slider values hidden,
help behind label clicks, no save feedback) is replaced by
firmware/uniclock/web/index.html: one file, no jQuery, gzipped by
web/gzip_web.py to data/index.html.gz (12 KB) before every build.

- Tabs Home / Tubes / Light / Network / System, rows with label, help
  line and control; sliders always show their value
- "Saved" / "Not saved" after each change, reverted on failure; offline
  indicator with automatic retry (the old poll stopped after one error)
- WiFi and MQTT settings only save with a Save button, then offer a
  restart; password fields are write-only
- Controls for hardware this clock lacks (alarm, radar, sensors) hidden
- Runs on sample data when opened from disk

Firmware: one serveStatic route (gzip, no-cache + ETag) replaces the
per-file routes; /getConfiguration no longer returns passwords and adds
ip, hasAlarm, hasRadar and the real cathProtMin; /getCurrentInfos adds
currentSec and mqtt state and sends "lux" instead of "lx" when there is
no sensor; /cathodeProtect and /firmwareupdate now answer.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-10-29 00:06:35 +01:00
1 parent ae87849e75
commit b40b5f680c
14 files changed
+724 -1661

No files matched your search

+7 -3
View File
@@ -3,8 +3,12 @@
Firmware for this clock, based on [ESP_UniClock](https://github.com/gpeter62/ESP_UniClock) by
Peter Gautier (GPL-3.0-or-later), vendored from upstream commit `1189810` (2026-09-07).
- `ESP32_UniClock2/`: the upstream sketch folder (all `.ino`/`.h` files and the web UI in `data/`).
It keeps the upstream layout, so it still opens in the Arduino IDE.
- `ESP32_UniClock2/`: the upstream sketch folder (all `.ino`/`.h` files; `data/` is the SPIFFS
content). It keeps the upstream layout, so it still opens in the Arduino IDE.
- `web/index.html`: the web UI (replaces the upstream jQuery page), one file with its CSS and JS.
`web/gzip_web.py` gzips it to `data/index.html.gz`; PlatformIO runs it before every build, in the
Arduino IDE run `python web/gzip_web.py` before uploading the data folder. Opened straight from
disk, the page runs on sample data, so layout changes can be checked without the clock.
- `lib/`: the library versions bundled upstream (`libraries/*.zip`), only those the ESP8266 build
needs. The upstream manuals, datasheets, photos and ESP32-only libraries were left out.
Exception: `arduino-home-assistant` is v2.1.0 (upstream bundles 1.3.0, which has no light,
@@ -18,7 +22,7 @@ Local changes are separate commits on top of the import (`git log -- firmware/un
```sh
pio run # build
pio run -t upload # flash the firmware over COM7
pio run -t uploadfs # flash the web UI (data/) to SPIFFS
pio run -t uploadfs # flash the web UI (data/) to SPIFFS; over WiFi: -e nixie_in12_ota
pio device monitor # serial log, 115200 Bd
```