154 lines
4.4 KiB
Plaintext
154 lines
4.4 KiB
Plaintext
# LCDd.conf
|
|
#
|
|
# This file contains the configuration for the LCDd server.
|
|
#
|
|
# The format is ini-file-like. It is divided into sections that start at
|
|
# markers that look like [section]. Comments are all line-based comments,
|
|
# and are lines that start with '#' or ';'.
|
|
#
|
|
# The server has a 'central' section named [server]. For the menu there is
|
|
# a section called [menu]. Further each driver has a section which
|
|
# defines how the driver acts.
|
|
#
|
|
# The drivers are activated by specifiying them in a driver= line in the
|
|
# server section, like:
|
|
#
|
|
# Driver=curses
|
|
#
|
|
# This tells LCDd to use the curses driver.
|
|
# The first driver that is loaded and is capable of output defines the
|
|
# size of the display. The default driver to use is curses.
|
|
# If -d is specified on the command line, the Driver= options in the
|
|
# config file are ignored.
|
|
#
|
|
# The drivers read their own options from the respective sections.
|
|
|
|
|
|
## Server section with all kinds of settings for the LCDd server ##
|
|
[server]
|
|
|
|
# Tells the server to load the given drivers. Multiple lines can be given.
|
|
# The name of the driver is exactly the same as the name of the driver
|
|
# module that is to be loaded, including the case of the letters !
|
|
# (That is: unless a file= option is given in the driver section)
|
|
Driver=hd44780
|
|
|
|
# Tells the driver to bind to the given interface
|
|
Bind=127.0.0.1
|
|
|
|
# Listen on this specified port; defaults to 13666.
|
|
Port=13666
|
|
|
|
# Sets the reporting level; defaults to 2 (warnings and errors only).
|
|
#ReportLevel=3
|
|
|
|
# Should we report to syslog instead of stderr ? Default: no
|
|
#ReportToSyslog=yes
|
|
|
|
# Sets the default time in seconds to displays a screen.
|
|
WaitTime=8
|
|
|
|
# User to run as. LCDd will drop its root priviledges,
|
|
# if any, and run as this user instead.
|
|
User=nobody
|
|
|
|
# If yes, the the serverscreen will be rotated as a usual info screen. If no,
|
|
# it will be a background screen, only visible when no other screens are
|
|
# active.
|
|
ServerScreen=no
|
|
|
|
# The server will stay in the foreground if set to true.
|
|
#Foreground=no
|
|
|
|
# Where can we find the driver modules ?
|
|
# IMPORTANT: Make sure to change this setting to reflect your
|
|
# specific setup! Otherwise LCDd won't be able to find
|
|
# the driver modules and will thus not be able to
|
|
# function properly.
|
|
# NOTE: Always place a slash as last character !
|
|
DriverPath=/usr/local/lib/lcdproc/
|
|
|
|
# The "...Key=" lines define what the server does with keypresses that
|
|
# don't go to any client.
|
|
# These are the defaults:
|
|
ToggleRotateKey=Enter
|
|
PrevScreenKey=Left
|
|
NextScreenKey=Right
|
|
#ScrollUpKey=Up
|
|
#ScrollDownKey=Down
|
|
|
|
# If you have only 4 keys, you can choose to use this:
|
|
#ToggleRotateKey=Enter
|
|
#PrevScreenKey=Up
|
|
#NextScreenKey=Down
|
|
|
|
# If you have only 3 keys, you can choose to use this:
|
|
#ToggleRotateKey=Enter
|
|
#PrevScreenKey=Up
|
|
|
|
|
|
|
|
## The menu section. The menu is an internal LCDproc client. ##
|
|
[menu]
|
|
# You can configure what keys the menu should use. Note that the MenuKey
|
|
# will be reserved exclusively, the others work in shared mode.
|
|
|
|
# The following works excellent with 4 keys or more.
|
|
MenuKey=Escape
|
|
EnterKey=Enter
|
|
UpKey=Up
|
|
DownKey=Down
|
|
# If you have 6 keys you may define these as well
|
|
#LeftKey=Left
|
|
#RightKey=Right
|
|
|
|
# If you have only 3 keys, you could use something like this:
|
|
#MenuKey=Escape
|
|
#EnterKey=Enter
|
|
#DownKey=Down
|
|
|
|
|
|
|
|
### Driver sections are below this line, in alphabetical order ###
|
|
## Hitachi HD44780 driver ##
|
|
[hd44780]
|
|
|
|
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
|
|
#Port=0x378
|
|
|
|
Device=/dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
|
|
|
|
# Select what type of connection. See documentation for types.
|
|
connectionType=lcdserializer
|
|
#connectionType=picanlcd
|
|
|
|
|
|
Speed=115200
|
|
|
|
RefreshDisplay=1
|
|
|
|
# Specifies the size of the LCD.
|
|
# In case of multiple combined displays, this should be the total size.
|
|
Size=40x4
|
|
|
|
# For multiple combined displays: how many lines does each display have.
|
|
# Vspan=2,2 means both displays have 2 lines.
|
|
#vspan=2,2
|
|
|
|
# If you have a KS0073 or an other 'almost HD44780-compatible', set this
|
|
# flag to get into extended mode (4-line linear).
|
|
# This flag is NOT the old obsolete Extended option.
|
|
#ExtendedMode=yes
|
|
|
|
# If your display is slow and cannot keep up with the flow of data from
|
|
# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
|
|
# to increase the delays. Default: 1.
|
|
DelayMult=12
|
|
|
|
# You can reduce the inserted delays by setting this to false.
|
|
# On fast PCs it is possible your LCD does not respond correctly.
|
|
# Default: true.
|
|
DelayBus=false
|
|
|
|
# EOF
|