790 lines
29 KiB
C
790 lines
29 KiB
C
/* This file is part the LCDproc driver for various serial VFD Devices.
|
|
|
|
It contains the hardwaredependent commands ach characterset.
|
|
|
|
If you want to add a new device to the driver add a new section
|
|
to the displaytype-switch-case in the init-function, add a new load_...
|
|
function below and fill it with the corrrect commands for the display.
|
|
(Try wich displaytype works best with your display, copy and modify
|
|
it's section that is the easiest way I guess.)
|
|
|
|
Copyright (C) 2006 Stefan Herdler
|
|
|
|
2006-05-16 Version 0.3: everything should work (not all hardware tested!)
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
|
|
|
|
*/
|
|
|
|
#include "serialVFD_displays.h"
|
|
#include "serialVFD.h"
|
|
#include "lcd.h"
|
|
|
|
void serialVFD_load_NEC_FIPC (Driver *drvthis);
|
|
void serialVFD_load_KD (Driver *drvthis);
|
|
void serialVFD_load_Noritake (Driver *drvthis);
|
|
void serialVFD_load_Futaba (Driver *drvthis);
|
|
void serialVFD_load_IEE_95B (Driver *drvthis);
|
|
void serialVFD_load_IEE_96 (Driver *drvthis);
|
|
void serialVFD_load_Futaba_NA202SD08FA(Driver *drvthis);
|
|
void serialVFD_load_Samsung (Driver *drvthis);
|
|
void serialVFD_load_Nixdorf_BA6x (Driver *drvthis);
|
|
|
|
int serialVFD_load_display_data(Driver *drvthis)
|
|
{
|
|
PrivateData *p = (PrivateData*) drvthis->private_data;
|
|
switch (p->display_type) {
|
|
case 0:
|
|
serialVFD_load_NEC_FIPC(drvthis);
|
|
break;
|
|
case 1:
|
|
serialVFD_load_KD(drvthis);
|
|
break;
|
|
case 2:
|
|
serialVFD_load_Noritake(drvthis);
|
|
break;
|
|
case 3:
|
|
serialVFD_load_Futaba(drvthis);
|
|
break;
|
|
case 4:
|
|
serialVFD_load_IEE_95B(drvthis);
|
|
break;
|
|
case 5:
|
|
serialVFD_load_IEE_96(drvthis);
|
|
break;
|
|
case 6:
|
|
serialVFD_load_Futaba_NA202SD08FA(drvthis);
|
|
break;
|
|
case 7:
|
|
serialVFD_load_Samsung(drvthis);
|
|
break;
|
|
case 8:
|
|
serialVFD_load_Nixdorf_BA6x(drvthis);
|
|
break;
|
|
default:
|
|
return -1;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
void
|
|
serialVFD_load_NEC_FIPC (Driver *drvthis)
|
|
{ //nec_fipc
|
|
PrivateData *p = (PrivateData*) drvthis->private_data;
|
|
int tmp, w;
|
|
|
|
if (p->customchars == -83)
|
|
p->customchars = 1; // number of custom characters the display provides
|
|
p->vbar_cc_offset = 5; // character offset of the bars
|
|
p->hbar_cc_offset = 12; // character offset of the bars
|
|
p->predefined_hbar = 1; // the display has predefined hbar-characters
|
|
p->predefined_vbar = 1; // the display has predefined vbar-characters
|
|
|
|
// hardwarespecific commands:
|
|
// hw_cmd[Command][data] = {{commandlength , command 1},
|
|
// .....
|
|
// {commandlength , command N}}
|
|
const char hw_cmd[11][4] = {{1 ,0x04}, // dark
|
|
{1 ,0x03},
|
|
{1 ,0x02},
|
|
{1 ,0x01}, // bright
|
|
{1 ,0x0D}, // pos1
|
|
// pos1 command is only used (and needed), when mv_cursor command is not supported
|
|
{1 ,0x1B}, // move cursor (set to 0 if not supported)
|
|
{1 ,0x0C}, // reset
|
|
{2 ,0x14, 0x11}, // init
|
|
{1 ,0x1A}, // set user char
|
|
{1 ,0x09}, // tab
|
|
{0 }}; // next_line (only used in line mode)
|
|
// Line mode will be used if Next_line command is set!!!
|
|
// Do not set if the display supports normal mode (most displays should do this).
|
|
|
|
for (tmp = 0; tmp < 11; tmp++)
|
|
for (w = 0; w < 4; w++)
|
|
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
|
|
|
// Translates ISO 8859-1 to display charset.
|
|
const unsigned char charmap[] = {
|
|
127, // the "filled-block"-character usually 127
|
|
/* #128 = 0x80 */
|
|
128, 129, 130, 131, 132, 133, 134, 135,
|
|
136, 137, 138, 139, 140, 141, 142, 143,
|
|
144, 145, 146, 147, 148, 149, 150, 151,
|
|
152, 153, 154, 155, 156, 157, 158, 159,
|
|
/* #160 = 0xA0 */
|
|
160, '!', 0xF7, 0xF8, '?', '?', 0x7C, 0xF9,
|
|
'"', '?', '?', '?', '?', '-', '?', '?',
|
|
0x8B, 0xF3, 0x89, 0x8A, 0x27, 0x98, '?', '.',
|
|
',', '?', '?', '?', '?', 0x8C, '?', 0xAA,
|
|
/* #192 = 0xC0 */
|
|
'A', 'A', 'A', 'A', 0xA2, 0xA8, 'A', 'C',
|
|
'E', 'E', 'E', 0xB6, 'I', 'I', 'I', 'I',
|
|
'D', 0xA9, 'O', 'O', 'O', 'O', 0xA3, 0x8D,
|
|
'0', 'U', 'U', 'U', 0xA4, 'Y', 'p', 0x91,
|
|
/* #224 = 0xE0 */
|
|
'a', 'a', 'a', 'a', 0xA5, 'a', 'a', 'c',
|
|
'e', 'e', 'e', 'e', 'i', 'i', 'i', 'i',
|
|
'o', 'n', 'o', 'o', 'o', 'o', 0xA6, 0x8E,
|
|
'0', 'u', 'u', 'u', 0xA7, 'y', 'p', 'y' };
|
|
for (tmp = 0; tmp < 129; tmp++)
|
|
p->charmap[tmp] = charmap[tmp];
|
|
|
|
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
|
const int usr_chr_dot_assignment[57] = { 7,
|
|
1, 2, 3, 4, 5, 0, 0, 0,
|
|
6, 7, 8, 9,10, 0, 0, 0,
|
|
11,12,13,14,15, 0, 0, 0,
|
|
16,17,18,19,20, 0, 0, 0,
|
|
21,22,23,24,25, 0, 0, 0,
|
|
26,27,28,29,30, 0, 0, 0,
|
|
31,32,33,34,35, 0, 0, 0 };
|
|
for (tmp = 0; tmp < 57; tmp++)
|
|
p->usr_chr_dot_assignment[tmp] = usr_chr_dot_assignment[tmp];
|
|
|
|
// Where to place the usercharacters (0..30) in the asciicode.
|
|
// Also used to map standardcharacters in the usercharacterspace(0..30)
|
|
// (useful for displays with less then 30 usercharacters and predefined bars)
|
|
const unsigned int usr_chr_mapping[31] =
|
|
{0xAF,0,0,0,0,0, 0x5F, 0xE0, 0xE1, 0xE2, 0xE3, 0xE4, 0, 0x5F, 0xE1, 0xE3, 0xE4};
|
|
for (tmp = 0; tmp < 31; tmp++)
|
|
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
|
|
|
// The following is only needet to set if the display needs a different setting
|
|
// for loading the usercharacters.
|
|
// Example: The character loaded to 0x00 will be shown at 0xFD.
|
|
// usr_chr_load_mapping[0] or usr_chr_load_mapping[1] has to be != 0
|
|
//const unsigned int usr_chr_load_mapping[31]=
|
|
//{ 0x02, 0x01, 0x00};
|
|
//for (tmp = 0; tmp < 31; tmp++)
|
|
// p->usr_chr_load_mapping[tmp] = usr_chr_load_mapping[tmp];
|
|
}
|
|
|
|
|
|
void
|
|
serialVFD_load_KD (Driver *drvthis)
|
|
{ //KD Rev2.1
|
|
PrivateData *p = (PrivateData*) drvthis->private_data;
|
|
int tmp, w;
|
|
|
|
if (p->customchars == -83)
|
|
p->customchars = 31; // number of custom characters the display provides
|
|
p->vbar_cc_offset = 0; // character offset of the bars
|
|
p->hbar_cc_offset = 0; // character offset of the bars
|
|
p->predefined_hbar = 0; // the display has predefined hbar-characters
|
|
p->predefined_vbar = 0; // the display has predefined vbar-characters
|
|
|
|
// hardwarespecific commands:
|
|
// hw_cmd[Command][data] = {{commandlength , command 1},
|
|
// .....
|
|
// {commandlength , command N}}
|
|
const char hw_cmd[10][4] = {{1 ,0x04}, // dark
|
|
{1 ,0x03},
|
|
{1 ,0x02},
|
|
{1 ,0x01}, // bright
|
|
{1 ,0x0D}, // pos1
|
|
{1 ,0x1B}, // move cursor (set to 0 if not supported)
|
|
{1 ,0x0C}, // reset
|
|
{2 ,0x14, 0x11}, // init
|
|
{1 ,0x1A}, // set user char
|
|
{1 ,0x09}}; // tab
|
|
for (tmp = 0; tmp < 10; tmp++)
|
|
for (w = 0; w < 4; w++)
|
|
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
|
|
|
const unsigned char charmap[] = {
|
|
127, // the "filled-block"-character usually 127
|
|
/* #128 = 0x80 */
|
|
128, 129, 130, 131, 132, 133, 134, 135,
|
|
136, 137, 138, 139, 140, 141, 142, 143,
|
|
144, 145, 146, 147, 148, 149, 150, 151,
|
|
152, 153, 154, 155, 156, 157, 158, 159,
|
|
/* #160 = 0xA0 */
|
|
160, '!', 0xF7, 0xF8, '?', '?', 0x7C, 0xF9,
|
|
'"', '?', '?', '?', '?', '-', '?', '?',
|
|
0xA9, 0xBA, '?', '?', 0x27, '?', '?', '.',
|
|
',', '?', '?', '?', '?', '?', '?', '?',
|
|
/* #192 = 0xC0 */
|
|
0xB2, 'A', 'A', 'A', 0xA2, 0xA1, 'A', 'C',
|
|
'E', 'E', 0xA8, 0xB6, 0xAB, 0xAA, 0xAC, 0xA9,
|
|
'D', 0xAE, 0xB1, 0xB0, 0xBF, 'O', 0xA3, 'x',
|
|
0xAF, 0xB7, 0xB6, 0xB8, 0xA4, 'Y', 'p', 0x91,
|
|
/* #224 = 0xE0 */
|
|
0xD2, 0xC2, 0xC4, 'a', 0xA5, 0xC1, 0xC5, 0xC3,
|
|
0xC7, 0xC6, 0xC8, 0xD4, 0xCC, 0xCB, 0xCD, 0xCA,
|
|
'o', 0xCF, 0xD1, 0xD0, 0xCE, 'o', 0xA6, 0xBB,
|
|
0xD0, 0xD7, 0xD6, 0xD8, 0xA7, 'y', 'p', 'y' };
|
|
for (tmp = 0; tmp < 129; tmp++)
|
|
p->charmap[tmp] = charmap[tmp];
|
|
|
|
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
|
const int usr_chr_dot_assignment[57] = { 7,
|
|
1, 2, 3, 4, 5, 0, 0, 0,
|
|
6, 7, 8, 9,10, 0, 0, 0,
|
|
11,12,13,14,15, 0, 0, 0,
|
|
16,17,18,19,20, 0, 0, 0,
|
|
21,22,23,24,25, 0, 0, 0,
|
|
26,27,28,29,30, 0, 0, 0,
|
|
31,32,33,34,35, 0, 0, 0 };
|
|
for (tmp = 0; tmp < 57; tmp++)
|
|
p->usr_chr_dot_assignment[tmp] = usr_chr_dot_assignment[tmp];
|
|
|
|
// Where to place the usercharacters (0..30) in the asciicode.
|
|
// Also used to map standardcharacters in the usercharacterspace(0..30)
|
|
// (useful for displays with less then 30 usercharacters and predefined bars)
|
|
const unsigned int usr_chr_mapping[31]=
|
|
{0xAF};
|
|
for (tmp = 0; tmp < 31; tmp++)
|
|
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
|
}
|
|
|
|
|
|
void
|
|
serialVFD_load_Noritake (Driver *drvthis)
|
|
{ //Noritake
|
|
PrivateData *p = (PrivateData*) drvthis->private_data;
|
|
int tmp, w;
|
|
|
|
if (p->customchars == -83)
|
|
p->customchars = 16; // number of custom characters the display provides
|
|
p->vbar_cc_offset = 0; // character offset of the bars
|
|
p->hbar_cc_offset = 0; // character offset of the bars
|
|
p->predefined_hbar = 0; // the display has predefined hbar-characters
|
|
p->predefined_vbar = 0; // the display has predefined vbar-characters
|
|
|
|
// hardwarespecific commands:
|
|
// hw_cmd[Command][data] = {{commandlength , command 1},
|
|
// .....
|
|
// {commandlength , command N}}
|
|
const char hw_cmd[10][4] = {{3 ,0x1B, 0x4C, 0x00}, // dark
|
|
{3 ,0x1B, 0x4C, 0x50},
|
|
{3 ,0x1B, 0x4C, 0x90},
|
|
{3 ,0x1B, 0x4C, 0xFF}, // bright
|
|
{1 ,0x0C}, // pos1
|
|
{2 ,0x1B, 0x48}, // move cursor (set to 0 if not supported)
|
|
{2 ,0x1B, 0x49}, // reset
|
|
{2 ,0x14, 0x11}, // init
|
|
{2 ,0x1B, 0x43}, // set user char
|
|
{1 ,0x09}}; // tab
|
|
for (tmp = 0; tmp < 10; tmp++)
|
|
for (w = 0; w < 4; w++)
|
|
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
|
|
|
// no charmap needed
|
|
for (tmp = 0; tmp < 129; tmp++)
|
|
p->charmap[tmp] = tmp+127;
|
|
|
|
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
|
const int usr_chr_dot_assignment[57] = { 5,
|
|
1, 2, 3, 4, 5, 6, 7, 8,
|
|
9,10,11,12,13,14,15,16,
|
|
17,18,19,20,21,22,23,24,
|
|
25,26,27,28,29,30,31,32,
|
|
33,34,35, 0, 0, 0, 0, 0 };
|
|
for (tmp = 0; tmp < 57; tmp++)
|
|
p->usr_chr_dot_assignment[tmp] = usr_chr_dot_assignment[tmp];
|
|
|
|
// Where to place the usercharacters (0..30) in the asciicode.
|
|
// Also used to map standardcharacters in the usercharacterspace(0..30)
|
|
// (useful for displays with less then 30 usercharacters and predefined bars)
|
|
const unsigned int usr_chr_mapping[31]=
|
|
{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,\
|
|
0x0F, 0x10, 0x13 , 0x14, 0x1C, 0x1D, 0x1E, 0x1F};
|
|
for (tmp = 0; tmp < 31; tmp++)
|
|
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
|
}
|
|
|
|
|
|
void
|
|
serialVFD_load_Futaba (Driver *drvthis)
|
|
{ //Futaba
|
|
PrivateData *p = (PrivateData*) drvthis->private_data;
|
|
int tmp, w;
|
|
|
|
if (p->customchars == -83)
|
|
p->customchars = 3; // number of custom characters the display provides
|
|
p->vbar_cc_offset = 0; // character offset of the bars
|
|
p->hbar_cc_offset = 0; // character offset of the bars
|
|
p->predefined_hbar = 0; // the display has predefined hbar-characters
|
|
p->predefined_vbar = 0; // the display has predefined vbar-characters
|
|
|
|
// hardwarespecific commands:
|
|
// hw_cmd[Command][data] = {{commandlength , command 1},
|
|
// .....
|
|
// {commandlength , command N}}
|
|
const char hw_cmd[10][4] = {{2 ,0x04, 0x20}, // dark
|
|
{2 ,0x04, 0x40},
|
|
{2 ,0x04, 0x60},
|
|
{2 ,0x04, 0xFF}, // bright
|
|
{2 ,0x10, 0x00}, // pos1
|
|
{1 ,0x10}, // move cursor (set to 0 if not supported)
|
|
{1 ,0x1F}, // reset
|
|
{2 ,0x11,0x14}, // init
|
|
{1 ,0x03}, // set user char
|
|
{1 ,0x09}}; // tab
|
|
for (tmp = 0; tmp < 10; tmp++)
|
|
for (w = 0; w < 4; w++)
|
|
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
|
|
|
// Translates ISO 8859-1 to display charset.
|
|
const unsigned char charmap[] = {
|
|
127, // the "filled-block"-character usually 127
|
|
/* #128 = 0x80 */
|
|
128, 129, 130, 131, 132, 133, 134, 135,
|
|
136, 137, 138, 139, 140, 141, 142, 143,
|
|
144, 145, 146, 147, 148, 149, 150, 151,
|
|
152, 153, 154, 155, 156, 157, 158, 159,
|
|
/* #160 = 0xA0 */
|
|
160, 0xAD, 0x9B, 0x9C, 0xC8, 0x9D, 0x7C, 0xC0,
|
|
'"', '?', 0xA6, 0xAE, 0xAA, '-', '?', '?',
|
|
0xEF, 0xCA, 0xC6, 0xC7, 0x27, 0xB8, '?', '.',
|
|
',', '?', 0xA7, 0xAF, 0xAC, 0xAB, '?', 0xA8,
|
|
/* #192 = 0xC0 */
|
|
0xD0, 'A', 0xD5, 'A', 0x8E, 0x8F, 0x92, 0x80,
|
|
0xD1, 0x90, 0xD6, 0xD3, 'I', 'I', 0xD7, 0xD4,
|
|
'D', 0xA5, 'O', 'O', 0xD8, 'O', 0x99, 'x',
|
|
'0', 0xD2, 'U', 0xD9, 0x9A, 'Y', 'p', 0xB1,
|
|
/* #224 = 0xE0 */
|
|
0x85, 0xA0, 0x83, 'a', 0x84, 0x86, 0x91, 0x87,
|
|
0x8A, 0x82, 0x88, 0x89, 0x8D, 0xA1, 0x8C, 0x8B,
|
|
'o', 0xA4, 0x95, 0xA9, 0x93, 'o', 0x94, '/',
|
|
'0', 0x97, 0xA3, 0x96, 0x81, 'y', 'p', 0x89 };
|
|
for (tmp = 0; tmp < 129; tmp++)
|
|
p->charmap[tmp] = charmap[tmp];
|
|
|
|
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
|
const int usr_chr_dot_assignment[57] = { 5,
|
|
8, 7, 6, 5, 4, 3, 2, 1,
|
|
16,15,14,13,12,11,10, 9,
|
|
24,23,22,21,20,19,18,17,
|
|
32,31,30,29,28,27,26,25,
|
|
0, 0, 0, 0, 0,35,34,33 };
|
|
for (tmp = 0; tmp < 57; tmp++)
|
|
p->usr_chr_dot_assignment[tmp] = usr_chr_dot_assignment[tmp];
|
|
|
|
// Where to place the usercharacters (0..30) in the asciicode.
|
|
// Also used to map standardcharacters in the usercharacterspace(0..30)
|
|
// (useful for displays with less then 30 usercharacters and predefined bars)
|
|
const unsigned int usr_chr_mapping[31] = { 0xCD, 0xCE, 0xCF };
|
|
for (tmp = 0; tmp < 31; tmp++)
|
|
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
|
}
|
|
|
|
|
|
void
|
|
serialVFD_load_IEE_95B (Driver *drvthis)
|
|
{ //IEE_03601-95B_2x40_VFD
|
|
PrivateData *p = (PrivateData*) drvthis->private_data;
|
|
int tmp, w;
|
|
|
|
if (p->customchars == -83)
|
|
p->customchars = 10; // number of custom characters the display provides
|
|
p->vbar_cc_offset = 0; // character offset of the bars
|
|
p->hbar_cc_offset = 0; // character offset of the bars
|
|
p->predefined_hbar = 0; // the display has predefined hbar-characters
|
|
p->predefined_vbar = 0; // the display has predefined vbar-characters
|
|
p->para_wait = 60; // the display needs more delay in the parallelport mode
|
|
|
|
// hardwarespecific commands:
|
|
// hw_cmd[Command][data] = {{commandlength , command 1},
|
|
// .....
|
|
// {commandlength , command N}}
|
|
const char hw_cmd[10][4] = {{1 ,0x1C}, // dark
|
|
{1 ,0x1D},
|
|
{1 ,0x1E},
|
|
{1 ,0x1F}, // bright
|
|
{1 ,0x16}, // pos1
|
|
{1 ,0x1B}, // move cursor (set to 0 if not supported)
|
|
{1 ,0x15}, // reset
|
|
{2 ,0x0E, 0x11}, // init
|
|
{1 ,0x18}, // set user char
|
|
{1 ,0x09}}; // tab
|
|
for (tmp = 0; tmp < 10; tmp++)
|
|
for (w = 0; w < 4; w++)
|
|
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
|
|
|
|
|
const unsigned char charmap[] = {
|
|
0xEF, // the "filled-block"-character usually 127
|
|
/* #128 = 0x80 */
|
|
0x7F, 0xD9, 0xDA, 0xDB, 0xDC, 0xDD, 0xDE, 0xDF,
|
|
0xE0, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
|
|
0xE8, 0xE9, 0xBA, 0xBB, 0xBC, 0xBD, 0xBE, 0xBF,
|
|
152, 153, 154, 155, 156, 157, 158, 159,
|
|
/* #160 = 0xA0 */
|
|
160, '!', 0xD3, '?', '?', 0x5C, 0x7C, '?',
|
|
'"', '?', '?', '?', '?', '-', '?', '?',
|
|
0xB9, 0xBA, '?', '?', 0x27, '?', '?', '.',
|
|
',', '?', '?', '?', '?', '?', '?', '?',
|
|
/* #192 = 0xC0 */
|
|
0xB2, 0xA2, 0xA4, 'A', 0xA0, 0xA1, 0xA5, 0xA3,
|
|
0xA7, 0xA6, 0xA8, 0xB4, 0xAB, 0xAA, 0xAC, 0xA9,
|
|
'D', 0xAE, 0xB1, 0xB0, 0xBF, 'O', 0xAD, 'x',
|
|
0xAF, 0xB7, 0xB6, 0xB8, 0xB5, 'Y', 'p', 0xB3,
|
|
/* #224 = 0xE0 */
|
|
0xD2, 0xC2, 0xC4, 'a', 0xC0, 0xC1, 0xC5, 0xC3,
|
|
0xC7, 0xC6, 0xC8, 0xD4, 0xCB, 0xCA, 0xCC, 0xC9,
|
|
'o', 0xCE, 0xD1, 0xD0, 0xDF, 'o', 0xAD, 0xBB,
|
|
0xCF, 0xD7, 0xD6, 0xD8, 0xD5, 'y', 'p', 'y' };
|
|
for (tmp = 0; tmp < 129; tmp++)
|
|
p->charmap[tmp] = charmap[tmp];
|
|
|
|
|
|
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
|
const int usr_chr_dot_assignment[57] = { 6,
|
|
0, 0, 0, 0,34,17, 3, 0,
|
|
33,14, 4,23,30,13, 7, 0,
|
|
29,10, 8,27,26, 9,11, 0,
|
|
25, 6,12,31,22, 5,15, 0,
|
|
21, 2,16,35,18, 1,19, 0,
|
|
20,24,28,32, 0, 0, 0, 0 };
|
|
for (tmp = 0; tmp < 57; tmp++)
|
|
p->usr_chr_dot_assignment[tmp] = usr_chr_dot_assignment[tmp];
|
|
|
|
// Where to place the usercharacters (0..30) in the asciicode.
|
|
// Also used to map standardcharacters in the usercharacterspace(0..30)
|
|
// (useful for displays with less then 30 usercharacters and predefined bars)
|
|
const unsigned int usr_chr_mapping[31]=
|
|
{0xFF, 0xFE, 0xFD, 0xFC, 0xFB, 0xFA, 0xF9, 0xF8, 0xF7, 0xF6};
|
|
for (tmp = 0; tmp < 31; tmp++)
|
|
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
|
|
|
// The following is only needet to set if the display needs a different setting
|
|
// for loading the usercharacters.
|
|
// Example: The character loaded to 0x00 will be shown at 0xFD.
|
|
// usr_chr_load_mapping[0] or usr_chr_load_mapping[1] has to be != 0
|
|
const unsigned int usr_chr_load_mapping[31]=
|
|
{0x09, 0x08, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00};
|
|
for (tmp = 0; tmp < 31; tmp++)
|
|
p->usr_chr_load_mapping[tmp] = usr_chr_load_mapping[tmp];
|
|
|
|
}
|
|
|
|
void
|
|
serialVFD_load_IEE_96 (Driver *drvthis)
|
|
{ //IEE_03601-96_2x40_VFD
|
|
PrivateData *p = (PrivateData*) drvthis->private_data;
|
|
int tmp, w;
|
|
|
|
if (p->customchars == -83)
|
|
p->customchars = 3; // number of custom characters the display provides
|
|
p->vbar_cc_offset = 0; // character offset of the bars
|
|
p->hbar_cc_offset = 0; // character offset of the bars
|
|
p->predefined_hbar = 0; // the display has predefined hbar-characters
|
|
p->predefined_vbar = 0; // the display has predefined vbar-characters
|
|
p->para_wait = 60; // the display needs more delay in the parallelport mode
|
|
|
|
// hardwarespecific commands:
|
|
// hw_cmd[Command][data] = {{commandlength , command 1},
|
|
// .....
|
|
// {commandlength , command N}}
|
|
const char hw_cmd[10][4] = {{1 ,0x1C}, // dark
|
|
{1 ,0x1D},
|
|
{1 ,0x1E},
|
|
{1 ,0x1F}, // bright
|
|
{1 ,0x16}, // pos1
|
|
{0 }, // move cursor (set to 0 if not supported)
|
|
{1 ,0x15}, // reset
|
|
{2 ,0x0E, 0x11}, // init
|
|
{1 ,0x18}, // set user char
|
|
{1 ,0x09}}; // tab
|
|
for (tmp = 0; tmp < 10; tmp++)
|
|
for (w = 0; w < 4; w++)
|
|
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
|
|
|
|
|
const unsigned char charmap[] = {
|
|
0xEF, // the "filled-block"-character usually 127
|
|
/* #128 = 0x80 */
|
|
0x7F, 0xD9, 0xDA, 0xDB, 0xDC, 0xDD, 0xDE, 0xDF,
|
|
0xE0, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
|
|
0xE8, 0xE9, 0xBA, 0xBB, 0xBC, 0xBD, 0xBE, 0xBF,
|
|
152, 153, 154, 155, 156, 157, 158, 159,
|
|
/* #160 = 0xA0 */
|
|
160, '!', 0xD3, '?', '?', 0x5C, 0x7C, '?',
|
|
'"', '?', '?', '?', '?', '-', '?', '?',
|
|
0xB9, 0xBA, '?', '?', 0x27, '?', '?', '.',
|
|
',', '?', '?', '?', '?', '?', '?', '?',
|
|
/* #192 = 0xC0 */
|
|
0xB2, 0xA2, 0xA4, 'A', 0xA0, 0xA1, 0xA5, 0xA3,
|
|
0xA7, 0xA6, 0xA8, 0xB4, 0xAB, 0xAA, 0xAC, 0xA9,
|
|
'D', 0xAE, 0xB1, 0xB0, 0xBF, 'O', 0xAD, 'x',
|
|
0xAF, 0xB7, 0xB6, 0xB8, 0xB5, 'Y', 'p', 0xB3,
|
|
/* #224 = 0xE0 */
|
|
0xD2, 0xC2, 0xC4, 'a', 0xC0, 0xC1, 0xC5, 0xC3,
|
|
0xC7, 0xC6, 0xC8, 0xD4, 0xCB, 0xCA, 0xCC, 0xC9,
|
|
'o', 0xCE, 0xD1, 0xD0, 0xDF, 'o', 0xAD, 0xBB,
|
|
0xCF, 0xD7, 0xD6, 0xD8, 0xD5, 'y', 'p', 'y' };
|
|
for (tmp = 0; tmp < 129; tmp++)
|
|
p->charmap[tmp] = charmap[tmp];
|
|
|
|
|
|
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
|
const int usr_chr_dot_assignment[57] = { 6,
|
|
0, 7, 0,26, 0, 8,17, 0,
|
|
0, 9,18,28, 0,10,19, 0,
|
|
1,11,20,30, 2,12,21, 0,
|
|
3,13,22,32, 4,14,23, 0,
|
|
5,15,24,34, 6,16,25, 0,
|
|
27,29,31,33,35, 0, 0, 0 };
|
|
for (tmp = 0; tmp < 57; tmp++)
|
|
p->usr_chr_dot_assignment[tmp] = usr_chr_dot_assignment[tmp];
|
|
|
|
// Where to place the usercharacters (0..30) in the asciicode.
|
|
// Also used to map standardcharacters in the usercharacterspace(0..30)
|
|
// (useful for displays with less then 30 usercharacters and predefined bars)
|
|
const unsigned int usr_chr_mapping[31]=
|
|
{0xFF, 0xFE, 0xFD};
|
|
for (tmp = 0; tmp < 31; tmp++)
|
|
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
|
|
|
// The following is only needet to set if the display needs a different setting
|
|
// for loading the usercharacters.
|
|
// Example: The character loaded to 0x00 will be shown at 0xFD.
|
|
// usr_chr_load_mapping[0] or usr_chr_load_mapping[1] has to be != 0
|
|
const unsigned int usr_chr_load_mapping[31]=
|
|
{ 0x02, 0x01, 0x00};
|
|
for (tmp = 0; tmp < 31; tmp++)
|
|
p->usr_chr_load_mapping[tmp] = usr_chr_load_mapping[tmp];
|
|
|
|
}
|
|
|
|
void
|
|
serialVFD_load_Futaba_NA202SD08FA (Driver *drvthis)
|
|
{ //IEE_03601-96_2x40_VFD
|
|
PrivateData *p = (PrivateData*) drvthis->private_data;
|
|
int tmp, w;
|
|
|
|
//if (p->customchars == -83) // display doesn't support custom characters
|
|
p->customchars = 0; // number of custom characters the display provides
|
|
p->vbar_cc_offset = 5; // character offset of the bars
|
|
p->hbar_cc_offset = 12; // character offset of the bars
|
|
p->predefined_hbar = 1; // the display has predefined hbar-characters
|
|
p->predefined_vbar = 1; // the display has predefined vbar-characters
|
|
p->para_wait = 25; // the display needs more delay in the parallelport mode
|
|
|
|
// hardwarespecific commands:
|
|
// hw_cmd[Command][data] = {{commandlength , command 1},
|
|
// .....
|
|
// {commandlength , command N}}
|
|
const char hw_cmd[10][4] ={{2 ,0x04, 0x20}, // dark
|
|
{2 ,0x04, 0x40},
|
|
{2 ,0x04, 0x60},
|
|
{2 ,0x04, 0xFF}, // bright
|
|
{1 ,0x16}, // pos1
|
|
{1 ,0x1B}, // move cursor (set to 0 if not supported)
|
|
{1 ,0x15}, // reset
|
|
{2 ,0x0E, 0x11}, // init
|
|
{1 ,0x18}, // set user char
|
|
{1 ,0x09}}; // tab
|
|
for (tmp = 0; tmp < 10; tmp++)
|
|
for (w = 0; w < 4; w++)
|
|
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
|
|
|
|
|
const unsigned char charmap[] = {
|
|
127, // the "filled-block"-character usually 127
|
|
/* #128 = 0x80 */
|
|
128, 129, 130, 131, 132, 133, 134, 135,
|
|
136, 137, 138, 139, 140, 141, 142, 143,
|
|
144, 145, 146, 147, 148, 149, 150, 151,
|
|
152, 153, 154, 155, 156, 157, 158, 159,
|
|
/* #160 = 0xA0 */
|
|
160, '!', 0xD3, 0x90, 0x9A, 'Y', 0x7C, 0x91,
|
|
'"', '?', '?', '?', '?', '-', '?', '?',
|
|
0xB9, 0xBA, 0x98, 0x99, 0x27, 0x88, '?', '.',
|
|
',', '?', '?', '?', '?', 0x9B, '?', '?',
|
|
/* #192 = 0xC0 */
|
|
0xB2, 0xA2, 0xA4, 'A', 0xA0, 0xA1, 0xA5, 0xA3,
|
|
0xA7, 0xA6, 0xA8, 0xB4, 0xAB, 0xAA, 0xAC, 0xA9,
|
|
'D', 0xAE, 0xB1, 0xB0, 0xBF, 'O', 0xAD, 'x',
|
|
0xAF, 0xB7, 0xB6, 0xB8, 0xA5, 'Y', 'p', 0xB3,
|
|
/* #224 = 0xE0 */
|
|
0xD2, 0xC2, 0xC4, 'a', 0xC0, 0xC1, 0xC5, 0xC3,
|
|
0xC7, 0xC6, 0xC8, 0xD4, 0xCB, 0xCA, 0xCC, 0xC9,
|
|
'o', 0xCE, 0xD1, 0xD0, 0xDF, 'o', 0xAD, 0xBB,
|
|
0xCF, 0xD7, 0xD6, 0xD8, 0xD5, 'y', 'p', 'y' };
|
|
for (tmp = 0; tmp < 129; tmp++)
|
|
p->charmap[tmp] = charmap[tmp];
|
|
|
|
|
|
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
|
const int usr_chr_dot_assignment[57] = { 0, 0 }; // no usercharacters
|
|
for (tmp = 0; tmp < 57; tmp++)
|
|
p->usr_chr_dot_assignment[tmp] = usr_chr_dot_assignment[tmp];
|
|
|
|
// Where to place the usercharacters (0..30) in the asciicode.
|
|
// Also used to map standardcharacters in the usercharacterspace(0..30)
|
|
// (useful for displays with less then 30 usercharacters and predefined bars)
|
|
const unsigned int usr_chr_mapping[31]=
|
|
{0,0,0,0,0,0, 0xF4, 0xF4, 0xF5, 0xF6, 0xF6, 0xF7, 0, 0xF0, 0xF1, 0xF2, 0xF3};
|
|
for (tmp = 0; tmp < 31; tmp++)
|
|
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
|
|
|
|
|
}
|
|
|
|
void
|
|
serialVFD_load_Samsung (Driver *drvthis)
|
|
{ //Samsung 20S207DA4 & 20S207DA6
|
|
PrivateData *p = (PrivateData*) drvthis->private_data;
|
|
int tmp, w;
|
|
|
|
if (p->customchars == -83)
|
|
p->customchars = 16; // number of custom characters the display provides
|
|
p->vbar_cc_offset = 0; // character offset of the bars
|
|
p->hbar_cc_offset = 0; // character offset of the bars
|
|
p->predefined_hbar = 0; // the display has predefined hbar-characters
|
|
p->predefined_vbar = 0; // the display has predefined vbar-characters
|
|
|
|
// hardwarespecific commands:
|
|
// hw_cmd[Command][data] = {{commandlength , command 1},
|
|
// .....
|
|
// {commandlength , command N}}
|
|
const char hw_cmd[10][4] = {{2 ,0x04, 0x20}, // dark
|
|
{2 ,0x04, 0x40},
|
|
{2 ,0x04, 0x60},
|
|
{2 ,0x04, 0xFF}, // bright
|
|
{2 ,0x10, 0x00}, // pos1
|
|
{1 ,0x10,}, // move cursor
|
|
{1 ,0x1F}, // reset
|
|
{2 ,0x11,0x14}, // init
|
|
{1 ,0x1B}, // set user char
|
|
{1 ,0x09}}; // tab
|
|
for (tmp = 0; tmp < 10; tmp++)
|
|
for (w = 0; w < 4; w++)
|
|
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
|
|
|
// Translates ISO 8859-1 to display charset.
|
|
const unsigned char charmap[] = {
|
|
127, // the "filled-block"-character usually 127
|
|
/* #128 = 0x80 */
|
|
128, 129, 130, 131, 132, 133, 134, 135,
|
|
136, 137, 138, 139, 140, 141, 142, 143,
|
|
144, 145, 146, 147, 148, 149, 150, 151,
|
|
152, 153, 154, 155, 156, 157, 158, 159,
|
|
/* #160 = 0xA0 */
|
|
160, 0xAD, 0x9B, 0x9C, 0xC8, 0x9D, 0x7C, 0xC0,
|
|
'"', '?', 0xA6, 0xAE, 0xAA, '-', '?', '?',
|
|
0xEF, 0xCA, 0xC6, 0xC7, 0x27, 0xB8, '?', '.',
|
|
',', '?', 0xA7, 0xAF, 0xAC, 0xAB, '?', 0xA8,
|
|
/* #192 = 0xC0 */
|
|
0xD0, 'A', 0xD5, 'A', 0x8E, 0x8F, 0x92, 0x80,
|
|
0xD1, 0x90, 0xD6, 0xD3, 'I', 'I', 0xD7, 0xD4,
|
|
'D', 0xA5, 'O', 'O', 0xD8, 'O', 0x99, 'x',
|
|
'0', 0xD2, 'U', 0xD9, 0x9A, 'Y', 'p', 0xB1,
|
|
/* #224 = 0xE0 */
|
|
0x85, 0xA0, 0x83, 'a', 0x84, 0x86, 0x91, 0x87,
|
|
0x8A, 0x82, 0x88, 0x89, 0x8D, 0xA1, 0x8C, 0x8B,
|
|
'o', 0xA4, 0x95, 0xA9, 0x93, 'o', 0x94, '/',
|
|
'0', 0x97, 0xA3, 0x96, 0x81, 'y', 'p', 0x89 };
|
|
for (tmp = 0; tmp < 129; tmp++)
|
|
p->charmap[tmp] = charmap[tmp];
|
|
|
|
// {bytes to send, icon bit mapped to bit 0, icon bit mapped to bit 1, ...}
|
|
const int usr_chr_dot_assignment[57] = { 5,
|
|
8, 7, 6, 5, 4, 3, 2, 1,
|
|
16,15,14,13,12,11,10, 9,
|
|
24,23,22,21,20,19,18,17,
|
|
32,31,30,29,28,27,26,25,
|
|
0, 0, 0, 0, 0,35,34,33 };
|
|
for (tmp = 0; tmp < 57; tmp++)
|
|
p->usr_chr_dot_assignment[tmp] = usr_chr_dot_assignment[tmp];
|
|
|
|
// Where to place the usercharacters (0..30) in the asciicode.
|
|
// Also used to map standardcharacters in the usercharacterspace(0..30)
|
|
// (useful for displays with less then 30 usercharacters and predefined bars)
|
|
const unsigned int usr_chr_mapping[31] = { 0xCD, 0xCE, 0xCF, 0xEE,
|
|
0xFF, 0x05, 0x06, 0x07,
|
|
0x0B, 0x0C, 0x0E, 0x0F,
|
|
0x17, 0x1A, 0x1C, 0x1D };
|
|
for (tmp = 0; tmp < 31; tmp++)
|
|
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
|
}
|
|
|
|
void
|
|
serialVFD_load_Nixdorf_BA6x (Driver *drvthis)
|
|
{ // Nixdorf BA63 & BA66
|
|
PrivateData *p = (PrivateData*) drvthis->private_data;
|
|
int tmp, w;
|
|
|
|
//if (p->customchars == -83) // display doesn't support custom characters
|
|
p->customchars = 0; // number of custom characters the display provides
|
|
p->vbar_cc_offset = 5; // character offset of the bars
|
|
p->hbar_cc_offset = 12; // character offset of the bars
|
|
p->predefined_hbar = 1; // the display has predefined hbar-characters
|
|
p->predefined_vbar = 1; // the display has predefined vbar-characters
|
|
|
|
// hardwarespecific commands:
|
|
// hw_cmd[Command][data] = {{commandlength , command 1},
|
|
// .....
|
|
// {commandlength , command N}}
|
|
const char hw_cmd[11][10] = {{0 }, // dark
|
|
{0 },
|
|
{0 },
|
|
{0 }, // bright
|
|
{6 ,0x1B, 0x5B, '1', 0x3B, '1', 0x48}, // pos1
|
|
// pos1 command is only used (and needed), when mv_cursor command is not supported
|
|
{0 }, // move cursor
|
|
{4 ,0x1B, 0x5B, 0x32, 0x4A}, // reset
|
|
{3 ,0x1B, 0x52, 0x00}, // init
|
|
{0 }, // set user char
|
|
{0 }, // tab
|
|
{2 ,0x0D, 0x0A} // next_line
|
|
// Next_line command is only used in line mode.
|
|
// Line mode will be used if Next_line command is set!!!
|
|
// Set to "0" if display supports normal_mode!
|
|
};
|
|
for (tmp = 0; tmp < 11; tmp++)
|
|
for (w = 0; w < 10; w++)
|
|
p->hw_cmd[tmp][w] = hw_cmd[tmp][w];
|
|
|
|
// Translates ISO 8859-1 to display charset.
|
|
const unsigned char charmap[] = {
|
|
0xDB, // the "filled-block"-character usually 127
|
|
/* #128 = 0x80 */
|
|
128, 129, 130, 131, 132, 133, 134, 135,
|
|
136, 137, 138, 139, 140, 141, 142, 143,
|
|
144, 145, 146, 147, 148, 149, 150, 151,
|
|
152, 153, 154, 155, 156, 157, 158, 159,
|
|
/* #160 = 0xA0 */
|
|
160, 0xAD, 0x9B, 0x9C, 0xC8, 0x9D, 0x7C, 0xC0,
|
|
'"', '?', 0xA6, 0xAE, 0xAA, '-', '?', '?',
|
|
0xEF, 0xCA, 0xC6, 0xC7, 0x27, 0xB8, '?', '.',
|
|
',', '?', 0xA7, 0xAF, 0xAC, 0xAB, '?', 0xA8,
|
|
/* #192 = 0xC0 */
|
|
0xD0, 'A', 0xD5, 'A', 0x8E, 0x8F, 0x92, 0x80,
|
|
0xD1, 0x90, 0xD6, 0xD3, 'I', 'I', 0xD7, 0xD4,
|
|
'D', 0xA5, 'O', 'O', 0xD8, 'O', 0x99, 'x',
|
|
'0', 0xD2, 'U', 0xD9, 0x9A, 'Y', 'p', 0xB1,
|
|
/* #224 = 0xE0 */
|
|
0x85, 0xA0, 0x83, 'a', 0x84, 0x86, 0x91, 0x87,
|
|
0x8A, 0x82, 0x88, 0x89, 0x8D, 0xA1, 0x8C, 0x8B,
|
|
'o', 0xA4, 0x95, 0xA9, 0x93, 'o', 0x94, '/',
|
|
'0', 0x97, 0xA3, 0x96, 0x81, 'y', 'p', 0x89 };
|
|
for (tmp = 0; tmp < 129; tmp++)
|
|
p->charmap[tmp] = charmap[tmp];
|
|
|
|
|
|
// Where to place the usercharacters (0..30) in the asciicode.
|
|
// Also used to map standardcharacters in the usercharacterspace(0..30)
|
|
// (useful for displays with less then 30 usercharacters and predefined bars)
|
|
const unsigned int usr_chr_mapping[31]=
|
|
{0,0,0,0,0,0, ' ', ' ', 0xDC, 0xDC, 0xDC, 0xDB, 0, ' ', 0xDD, 0xDD, 0xDB};
|
|
for (tmp = 0; tmp < 31; tmp++)
|
|
p->usr_chr_mapping[tmp] = usr_chr_mapping[tmp];
|
|
}
|