61 lines
2.8 KiB
C
61 lines
2.8 KiB
C
/** \file server/drivers/hd44780-serial.h
|
|
* Contains configuration data for serial attached HD44780 displays supported
|
|
* by the \c hd44780 driver.
|
|
*/
|
|
|
|
#ifndef HD44780_SERIAL_H
|
|
#define HD44780_SERIAL_H
|
|
|
|
#include "lcd.h"
|
|
#include "hd44780-low.h"
|
|
|
|
#define SERIALIF_NAME_LENGTH 20
|
|
#define DEFAULT_DEVICE "/dev/lcd"
|
|
|
|
/** Declares one configuration enty in the serial_interfaces table */
|
|
struct hd44780_SerialInterface {
|
|
int connectiontype; /**< Connection type from hd44780 config */
|
|
/** Command escape character. This is always sent, even if 0x00 */
|
|
char instruction_escape;
|
|
/** Data escape character. Only sent if not NUL data is within range
|
|
* configure by data_escape_min and data_escape_max. */
|
|
char data_escape;
|
|
char data_escape_min; /**< Escaped data lower limit (inclusive) */
|
|
char data_escape_max; /**< Escaped data upper limit (exclusive) */
|
|
unsigned int default_bitrate; /**< Bitrate device is set to by default */
|
|
char if_bits; /**< Initialize to 8 or 4 bit interface */
|
|
char keypad; /**< Flag: keypad available */
|
|
char keypad_escape; /**< Keys must escaped with this character */
|
|
char backlight; /**< Flag: backlight available */
|
|
/** Escape character to send to indicate a backlight state change */
|
|
char backlight_escape;
|
|
/** Character to send to set display off. If not configured 0xFF is sent */
|
|
char backlight_off;
|
|
/** Character to send to set display on. If not configured 0x00 is sent */
|
|
char backlight_on;
|
|
/** Flag: Device has multiple controllers. If enabled, the displayID
|
|
* is added to data escape */
|
|
char multiple_displays;
|
|
char end_code; /**< Code to send on shutdown */
|
|
};
|
|
|
|
/**
|
|
* List of connectiontypes managed by this driver. If you change something
|
|
* here, remember also to change hd44780-drivers.h as well.
|
|
*/
|
|
static const struct hd44780_SerialInterface serial_interfaces[] = {
|
|
/* type instr data v ^ bitrate bits K esc B Besc Boff Bon Multi End */
|
|
{ HD44780_CT_PICANLCD, 0x11, 0x12, 0x00, 0x20, 9600, 8, 0, 0x00, 0, 0, 0, 0, 0, 0 },
|
|
{ HD44780_CT_LCDSERIALIZER, 0xFE, 0, 0x00, 0x00, 9600, 8, 0, 0x00, 0, 0, 0, 0, 0, 0 },
|
|
{ HD44780_CT_LOS_PANEL, 0xFE, 0, 0x00, 0x00, 9600, 4, 1, 0xFE, 1, 0xFF, 0, 0, 0, 0 },
|
|
{ HD44780_CT_VDR_LCD, 0xFE, 0, 0x00, 0x00, 9600, 4, 0, 0x00, 0, 0, 0, 0, 0, 0 },
|
|
{ HD44780_CT_VDR_WAKEUP, 0xC0, 0xC4, 0xC0, 0xD0, 9600, 4, 0, 0x00, 1, 0, 0xC9, 0xC8, 1, 0xCF },
|
|
{ HD44780_CT_PERTELIAN, 0xFE, 0, 0x00, 0x00, 9600, 8, 0, 0x00, 1, 0xFE, 0x02, 0x03, 0, 0 },
|
|
{ HD44780_CT_UNKNOWN, 0x00, 0, 0x00, 0x00, 0, 0, 0, 0, 0, 0x00, 0x00, 0x00, 0, 0 }
|
|
};
|
|
|
|
/* initialize this particular driver */
|
|
int hd_init_serial(Driver *drvthis);
|
|
|
|
#endif
|