mmdolze
9e4c082fd0
to correct C99 style to fix warnings when building with clang. Fix some typos in hd44780-serial while being there.
82 lines
3.7 KiB
C
82 lines
3.7 KiB
C
/** \file server/drivers/hd44780-serial.h
|
|
* Contains configuration data for serial attached HD44780 displays supported
|
|
* by the \c hd44780 driver.
|
|
*/
|
|
|
|
#ifndef HD44780_SERIAL_H
|
|
#define HD44780_SERIAL_H
|
|
|
|
#define SERIALIF_NAME_LENGTH 20
|
|
#define DEFAULT_DEVICE "/dev/lcd"
|
|
|
|
/** Declares one configuration entry in the serial_interfaces table */
|
|
struct hd44780_SerialInterface {
|
|
int connectiontype; /**< Connection type from hd44780 config */
|
|
|
|
/** \name Instruction / data escape sequence
|
|
* Determines if escape characters have to be sent for instruction or
|
|
* data values. The instruction escape character is always sent, even
|
|
* if its value is 0x00. The data escape character is only sent it it
|
|
* is not NUL and data is within range set by data_escape_min and
|
|
* data_escape_max.
|
|
*@{*/
|
|
unsigned char instruction_escape; /**< Instruction escape character. */
|
|
unsigned char data_escape; /**< Data escape character. */
|
|
unsigned char data_escape_min; /**< Escaped data lower limit (inclusive) */
|
|
unsigned char data_escape_max; /**< Escaped data upper limit (exclusive) */
|
|
/**@}*/
|
|
|
|
unsigned int default_bitrate; /**< Bitrate device is set to by default */
|
|
char if_bits; /**< Initialize to 8 or 4 bit interface */
|
|
|
|
/** \name Keypad settings
|
|
*@{*/
|
|
char keypad; /**< Flag: keypad available */
|
|
unsigned char keypad_escape; /**< Keys are escaped with this character */
|
|
/**@}*/
|
|
|
|
/** \name Backlight options
|
|
* The backlight flag determines the type of backlight available.
|
|
* If the backlight is just switchable, the backlight_off or
|
|
* backlight_on characters are sent according to backlight state.
|
|
* If the backlight is adjustable, these characters must define a range
|
|
* of values that are understood as different brightness levels by
|
|
* the display. The 'brightness' and 'offbrightness' values from config
|
|
* are used according to the backlight state and mapped to this range.
|
|
*@{*/
|
|
char backlight; /**< Flag: backlight available
|
|
* 0 = none, 1 = switchable, 2 = adjustable */
|
|
unsigned char backlight_escape; /**< Escape character to send to indicate
|
|
* a backlight state change */
|
|
unsigned char backlight_off; /**< Character sent to set display off
|
|
* or minimum value if adjustable */
|
|
unsigned char backlight_on; /**< Character sent to set display on
|
|
* or maximum value if adjustable */
|
|
/**@}*/
|
|
|
|
/** Flag: Device has multiple controllers. If enabled, the displayID
|
|
* is added to data_escape and it is always sent. */
|
|
char multiple_displays;
|
|
unsigned char end_code; /**< Code to send on shutdown */
|
|
};
|
|
|
|
/**
|
|
* List of connectiontypes managed by this driver. If you change something
|
|
* here, remember also to change hd44780-drivers.h as well.
|
|
*/
|
|
static const struct hd44780_SerialInterface serial_interfaces[] = {
|
|
/* type instr data v ^ bitrate bits K esc B Besc Boff Bon Multi End */
|
|
{ HD44780_CT_PICANLCD, 0x11, 0x12, 0x00, 0x20, 9600, 8, 0, 0x00, 0, 0, 0, 0, 0, 0 },
|
|
{ HD44780_CT_LCDSERIALIZER, 0xFE, 0, 0x00, 0x00, 9600, 8, 0, 0x00, 0, 0, 0, 0, 0, 0 },
|
|
{ HD44780_CT_LOS_PANEL, 0xFE, 0, 0x00, 0x00, 9600, 4, 1, 0xFE, 1, 0xFD, 0, 0xFF, 0, 0 },
|
|
{ HD44780_CT_VDR_LCD, 0xFE, 0, 0x00, 0x00, 9600, 4, 0, 0x00, 0, 0, 0, 0, 0, 0 },
|
|
{ HD44780_CT_VDR_WAKEUP, 0xC0, 0xC4, 0xC0, 0xD0, 9600, 4, 0, 0x00, 1, 0, 0xC9, 0xC8, 1, 0xCF },
|
|
{ HD44780_CT_PERTELIAN, 0xFE, 0, 0x00, 0x00, 9600, 8, 0, 0x00, 1, 0xFE, 0x02, 0x03, 0, 0 },
|
|
{ HD44780_CT_UNKNOWN, 0x00, 0, 0x00, 0x00, 0, 0, 0, 0, 0, 0x00, 0x00, 0x00, 0, 0 }
|
|
};
|
|
|
|
/* initialize this particular driver */
|
|
int hd_init_serial(Driver *drvthis);
|
|
|
|
#endif
|