marschap
5f4cfa3b88
providing the same functions (Matteo Pillon) - character mapping for special (almost) hd44780-compatible LCDs (Matteo Pillon)
829 lines
20 KiB
Plaintext
829 lines
20 KiB
Plaintext
# LCDd.conf
|
|
#
|
|
# This file contains the configuration for the LCDd server.
|
|
#
|
|
# The format is ini-file-like. It is divided into sections that start at
|
|
# markers that look like [section]. Comments are all line-based comments,
|
|
# and are lines that start with '#' or ';'.
|
|
#
|
|
# The server has a 'central' section named [server]. For the menu there is
|
|
# a section called [menu]. Further each driver has a section which
|
|
# defines how the driver acts.
|
|
#
|
|
# The drivers are activated by specifiying them in a driver= line in the
|
|
# server section, like:
|
|
#
|
|
# Driver=curses
|
|
#
|
|
# This tells LCDd to use the curses driver.
|
|
# The first driver that is loaded and is capable of output defines the
|
|
# size of the display. The default driver to use is curses.
|
|
# If -d is specified on the command line, the Driver= options in the
|
|
# config file are ignored.
|
|
#
|
|
# The drivers read their own options from the respective sections.
|
|
|
|
|
|
|
|
## Server section with all kinds of settings for the LCDd server ##
|
|
[server]
|
|
|
|
# Tells the server to load the given drivers. Multiple lines can be given.
|
|
# The name of the driver is exactly the same as the name of the driver
|
|
# module that is to be loaded, including the case of the letters !
|
|
# (That is: unless a file= option is given in the driver section)
|
|
Driver=curses
|
|
#Driver=CFontz633
|
|
#Driver=CFontzPacket
|
|
#Driver=CwLnx
|
|
#Driver=glcdlib
|
|
#Driver=IOWarrior
|
|
#Driver=imon
|
|
#Driver=MD8800
|
|
#Driver=MtxOrb
|
|
#Driver=NoritakeVFD
|
|
#Driver=serialVFD
|
|
|
|
# Tells the driver to bind to the given interface
|
|
Bind=127.0.0.1
|
|
|
|
# Listen on this specified port; defaults to 13666.
|
|
Port=13666
|
|
|
|
# Sets the reporting level; defaults to 2 (warnings and errors only).
|
|
#ReportLevel=3
|
|
|
|
# Should we report to syslog instead of stderr ? Default: no
|
|
#ReportToSyslog=yes
|
|
|
|
# Sets the default time in seconds to displays a screen.
|
|
WaitTime=5
|
|
|
|
# User to run as. LCDd will drop its root priviledges,
|
|
# if any, and run as this user instead.
|
|
User=nobody
|
|
|
|
# If yes, the the serverscreen will be rotated as a usual info screen. If no,
|
|
# it will be a background screen, only visible when no other screens are
|
|
# active.
|
|
#ServerScreen=no
|
|
|
|
# The server will stay in the foreground if set to true.
|
|
#Foreground=no
|
|
|
|
# Where can we find the driver modules ?
|
|
# IMPORTANT: Make sure to change this setting to reflect your
|
|
# specific setup! Otherwise LCDd won't be able to find
|
|
# the driver modules and will thus not be able to
|
|
# function properly.
|
|
# NOTE: Always place a slash as last character !
|
|
DriverPath=server/drivers/
|
|
|
|
# The "...Key=" lines define what the server does with keypresses that
|
|
# don't go to any client.
|
|
# These are the defaults:
|
|
ToggleRotateKey=Enter
|
|
PrevScreenKey=Left
|
|
NextScreenKey=Right
|
|
#ScrollUpKey=Up
|
|
#ScrollDownKey=Down
|
|
|
|
# If you have only 4 keys, you can choose to use this:
|
|
#ToggleRotateKey=Enter
|
|
#PrevScreenKey=Up
|
|
#NextScreenKey=Down
|
|
|
|
# If you have only 3 keys, you can choose to use this:
|
|
#ToggleRotateKey=Enter
|
|
#PrevScreenKey=Up
|
|
|
|
|
|
|
|
## The menu section. The menu is an internal LCDproc client. ##
|
|
[menu]
|
|
# You can configure what keys the menu should use. Note that the MenuKey
|
|
# will be reserved exclusively, the others work in shared mode.
|
|
|
|
# The following works excellent with 4 keys or more.
|
|
MenuKey=Escape
|
|
EnterKey=Enter
|
|
UpKey=Up
|
|
DownKey=Down
|
|
# If you have 6 keys you may define these as well
|
|
#LeftKey=Left
|
|
#RightKey=Right
|
|
|
|
# If you have only 3 keys, you could use something like this:
|
|
#MenuKey=Escape
|
|
#EnterKey=Enter
|
|
#DownKey=Down
|
|
|
|
|
|
|
|
### Driver sections are below this line, in alphabetical order ###
|
|
|
|
|
|
## EMAC BayRAD driver ##
|
|
[bayrad]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/lcd
|
|
|
|
# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200]
|
|
Speed=9600
|
|
|
|
|
|
|
|
## CrystalFontz driver (for CF632 & CF634) ##
|
|
[CFontz]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/ttyS0
|
|
# Select the LCD size [default: 20x4]
|
|
Size=20x4
|
|
# Set the initial contrast [default: 560; legal: 0 - 1000]
|
|
Contrast=350
|
|
# Set the initial brightness [default: 255; legal: 0 - 255]
|
|
Brightness=255
|
|
# Set the initial off-brightness [default: 0; legal: 0 - 255]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
OffBrightness=0
|
|
# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
|
|
Speed=9600
|
|
# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
|
|
NewFirmware=no
|
|
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
|
|
# normally you shouldn't need this
|
|
Reboot=no
|
|
|
|
|
|
|
|
## CrystalFontz633 driver (for CF633 only) ##
|
|
[CFontz633]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/ttyS0
|
|
# Select the LCD type (size) [default: 16x2]
|
|
Size=16x2
|
|
# Set the initial contrast [default: 560; legal: 0 - 1000]
|
|
Contrast=350
|
|
# Set the initial brightness [default: 1000; legal: 0 - 1000]
|
|
Brightness=1000
|
|
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
OffBrightness=50
|
|
# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
|
|
Speed=19200
|
|
# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
|
|
# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
|
|
#NewFirmware=no
|
|
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
|
|
# I want to reboot the LCD to make sure we start from a known state
|
|
Reboot=yes
|
|
|
|
|
|
|
|
## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
|
|
[CFontzPacket]
|
|
|
|
# Select the LCD model [default: 633; legal: 631, 633, 635]
|
|
Model=635
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/ttyUSB0
|
|
# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
|
|
Size=20x4
|
|
# Set the initial contrast [default: 560; legal: 0 - 1000]
|
|
Contrast=350
|
|
# Set the initial brightness [default: 1000; legal: 0 - 1000]
|
|
Brightness=1000
|
|
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
OffBrightness=50
|
|
# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
|
|
Speed=115200
|
|
# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
|
|
# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
|
|
#NewFirmware=no
|
|
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
|
|
# I want to reboot the LCD to make sure we start from a known state
|
|
Reboot=yes
|
|
|
|
|
|
|
|
## Curses driver ##
|
|
[curses]
|
|
|
|
# color settings
|
|
# foreground color [default: blue]
|
|
Foreground=blue
|
|
# background color when "backlight" is ff [default: cyan]
|
|
Background=cyan
|
|
# background color when "backlight" is on [default: red]
|
|
Backlight=red
|
|
|
|
# display size [default: 20x4]
|
|
Size=20x4
|
|
|
|
# What position (X,Y) to start the left top corner at...
|
|
# Default: (7,7)
|
|
TopLeftX=7
|
|
TopLeftY=7
|
|
|
|
# use ASC symbols for icons & bars [default: no; legal, yes, no]
|
|
UseACS=no
|
|
|
|
|
|
|
|
## Cwlinux driver ##
|
|
[CwLnx]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
#Device=/dev/ttyS0
|
|
Device=/dev/ttyUSB0
|
|
|
|
# Select the LCD size [default: 20x4]
|
|
Size=20x4
|
|
|
|
# Set the communication speed [default: 19200; legal: 9600, 19200]
|
|
Speed=19200
|
|
|
|
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
|
|
# normally you shouldn't need this
|
|
Reboot=no
|
|
|
|
# If you have a keypad connected. Keypad layout is currently not
|
|
# configureable from the config file.
|
|
Keypad=yes
|
|
|
|
# If you have a non-standard keypad you can associate any keystrings to keys.
|
|
# There are 6 input keys in the CwLnx hardware that generate characters
|
|
# from 'A' to 'F'.
|
|
#
|
|
# The following is the built-in default mapping hardcoded in the driver.
|
|
# You can leave those unchanged if you have a standard keypad.
|
|
# You can change it if you want to report other keystrings or have a non
|
|
# standard keypad.
|
|
# KeyMap_A=Up
|
|
# KeyMap_B=Down
|
|
# KeyMap_C=Left
|
|
# KeyMap_D=Right
|
|
# KeyMap_E=Enter
|
|
# KeyMap_F=Escape
|
|
|
|
# keypad_test_mode permits to test keypad assignement
|
|
# Default value is no
|
|
#keypad_test_mode=yes
|
|
|
|
|
|
|
|
## glcdlib meta driver for graphical LCDs ##
|
|
[glcdlib]
|
|
|
|
## mandatory:
|
|
|
|
# which graphical display supported by graphlcd-base to use [default: image]
|
|
# (see /etc/graphlcd.conf for possible drivers)
|
|
Driver=noritake800
|
|
|
|
# no=use graphlcd bitmap fonts (they have only one size / font file)
|
|
# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
|
|
UseFT2=yes
|
|
|
|
# text resolution in fixed width characters [default: 16x4]
|
|
# (if it won't fit according to available physical pixel resolutioni
|
|
# and the minimum available font face size in pixels, then
|
|
# 'DebugBorder' will automatically be turned on)
|
|
TextResolution=20x4
|
|
|
|
# path to font file to use
|
|
FontFile=/usr/share/fonts/corefonts/courbd.ttf
|
|
|
|
|
|
## these only apply if UseFT2=yes:
|
|
|
|
# character encoding to use
|
|
CharEncoding=iso8859-2
|
|
|
|
# minumum size in pixels in which fonts should be rendered
|
|
MinFontFaceSize=7x12
|
|
|
|
|
|
## optional:
|
|
Brightness=50 # Brightness (in %) if applicable
|
|
Contrast=50 # Contrast (in %) if applicable
|
|
Backlight=no # Backlight if applicable
|
|
UpsideDown=no # flip image upside down
|
|
Invert=no # invert light/dark pixels
|
|
ShowDebugFrame=no # turns on/off 1 pixel thick debugging
|
|
# border whithin the usable text area,
|
|
# for setting up TextResolution and
|
|
# MinFontFaceSize (if using FT2);
|
|
ShowBigBorder=no # border around the unused area
|
|
ShowThinBorder=yes # border around the unused area
|
|
PixelShiftX=0
|
|
PixelShiftY=2
|
|
|
|
|
|
|
|
## Matrix Orbital GLK driver ##
|
|
[glk]
|
|
|
|
# select the serial device to use [default: /dev/lcd]
|
|
Device=/dev/lcd
|
|
|
|
# set the initial contrast value [default: 560; legal: 0 - 1000]
|
|
Contrast=560
|
|
|
|
# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
|
|
Speed=19200
|
|
|
|
|
|
|
|
## Hitachi HD44780 driver ##
|
|
[hd44780]
|
|
|
|
# Select what type of connection. See documentation for types.
|
|
ConnectionType=4bit
|
|
|
|
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
|
|
Port=0x378
|
|
|
|
# Device of the serial interface (default is /dev/lcd)
|
|
Device=/dev/ttyS0
|
|
|
|
# Bitrate of the serial port (0 for interface default)
|
|
Speed=0
|
|
|
|
# If you have a keypad connected.
|
|
# You may also need to configure the keypad layout further on in this file.
|
|
Keypad=no
|
|
|
|
# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
|
|
Contrast=0
|
|
|
|
# If you have a switchable backlight.
|
|
Backlight=no
|
|
|
|
# If you have the additional output port ("bargraph") and you want to
|
|
# be able to control it with the lcdproc OUTPUT command
|
|
OutputPort=no
|
|
|
|
# Specifies if the last line is pixel addressable or it controls an
|
|
# underline effect. [default: true (= pixel addressable); legal: yes, no]
|
|
#Lastline=true
|
|
|
|
# Specifies the size of the LCD.
|
|
# In case of multiple combined displays, this should be the total size.
|
|
Size=20x4
|
|
|
|
# For multiple combined displays: how many lines does each display have.
|
|
# Vspan=2,2 means both displays have 2 lines.
|
|
#vspan=2,2
|
|
|
|
# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
|
|
# set this flag to get into extended mode (4-line linear).
|
|
# This flag is NOT the old obsolete Extended option.
|
|
#ExtendedMode=yes
|
|
|
|
# Character map to to map ISO-8859-1 to the LCD's character set
|
|
# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
|
|
Charmap=hd44780_default
|
|
|
|
# If your display is slow and cannot keep up with the flow of data from
|
|
# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
|
|
# to increase the delays. Default: 1.
|
|
#DelayMult=2
|
|
|
|
# You can reduce the inserted delays by setting this to false.
|
|
# On fast PCs it is possible your LCD does not respond correctly.
|
|
# Default: true.
|
|
DelayBus=true
|
|
|
|
# If you have a keypad you can assign keystrings to the keys.
|
|
# See documentation for used terms and how to wire it.
|
|
# For example to give directly connected key 4 the string "Enter", use:
|
|
# KeyDirect_4=Enter
|
|
# For matrix keys use the X and Y coordinates of the key:
|
|
# KeyMatrix_1_3=Enter
|
|
KeyMatrix_4_1=Enter
|
|
KeyMatrix_4_2=Up
|
|
KeyMatrix_4_3=Down
|
|
KeyMatrix_4_4=Escape
|
|
|
|
|
|
|
|
## ICP A106 driver ##
|
|
[icp_a106]
|
|
Device=/dev/ttyS1
|
|
|
|
|
|
|
|
## Code Mercenaries IO-Warrior driver ##
|
|
[IOWarrior]
|
|
|
|
# display dimensions
|
|
Size=20x4
|
|
|
|
# serial number [exactly as listed by usbview]
|
|
# (if not given, the 1st IOWarrior found gets used)
|
|
#SerialNumber=00000674
|
|
|
|
# Specifies if the last line is pixel addressable or it controls an
|
|
# underline effect. [default: true (= pixel addressable); legal: yes, no]
|
|
#Lastline=true
|
|
|
|
|
|
|
|
## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
|
|
[imon]
|
|
|
|
# select the device to use
|
|
Device=/dev/lcd0
|
|
|
|
# display dimensions
|
|
Size=16x2
|
|
|
|
|
|
|
|
## IrMan driver ##
|
|
[IrMan]
|
|
#if in trouble with IrMan, try Lirc emulator for IrMan
|
|
|
|
# Select the input device to use
|
|
#Device=/dev/irman
|
|
|
|
# Select the configuration file to use
|
|
#Config=/etc/irman.cfg
|
|
|
|
|
|
|
|
## Joystick driver ##
|
|
[joy]
|
|
|
|
# Select the input device to use [default: /dev/js0]
|
|
Device=/dev/js0
|
|
|
|
# set the axis map
|
|
Map_Axis1neg=Left
|
|
Map_Axis1pos=Right
|
|
Map_Axis2neg=Up
|
|
Map_Axis2pos=Down
|
|
|
|
# set the button map
|
|
Map_Button1=Enter
|
|
Map_Button2=Escape
|
|
|
|
|
|
|
|
## LB216 driver ##
|
|
[lb216]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/lcd
|
|
|
|
# Set the initial brightness [default: 255; legal: 0 - 255]
|
|
Brightness=255
|
|
|
|
# Set the communication speed [default: 9600; legal: 2400, 9600]
|
|
Speed=9600
|
|
|
|
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
|
|
Reboot=no
|
|
|
|
|
|
|
|
## LCDM001 driver ##
|
|
[lcdm001]
|
|
|
|
Device=/dev/ttyS1
|
|
|
|
# keypad settings
|
|
# Keyname Function
|
|
# Normal context Menu context
|
|
# ------- -------------- ------------
|
|
# PauseKey Pause/Continue Enter/select
|
|
# BackKey Back(Go to previous screen) Up/Left
|
|
# ForwardKey Forward(Go to next screen) Down/Right
|
|
# MainMenuKey Open main menu Exit/Cancel
|
|
PauseKey=LeftKey
|
|
BackKey=UpKey
|
|
ForwardKey=DownKey
|
|
MainMenuKey=RightKey
|
|
|
|
# You can rearrange the settings here.
|
|
# If your device is broken, have a look at server/drivers/lcdm001.h
|
|
|
|
|
|
|
|
## HNE LCTerm driver ##
|
|
[lcterm]
|
|
Device=/dev/ttyS1
|
|
Size=16x2
|
|
|
|
|
|
|
|
## LIRC input driver ##
|
|
[lirc]
|
|
|
|
# Specify an alternative location of the lircrc file [default: ~/.lircrc]
|
|
#lircrc=/etc/lircrc.lcdproc
|
|
|
|
# Must be the same as in your lircrc
|
|
#prog=lcdd
|
|
|
|
|
|
|
|
##The driver for the VFD of the Medion MD8800 PC ##
|
|
[MD8800]
|
|
# device to use [default: /dev/ttyS1]
|
|
#Device=/dev/ttyS1
|
|
|
|
# display size [default: 16x2]
|
|
#Size=16x2
|
|
|
|
# Set the initial brightness [default: 1000; legal: 0 - 1000]
|
|
Brightness=1000
|
|
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
OffBrightness=50
|
|
|
|
|
|
|
|
## MSI MS-6931 driver for displays in 1HU servers ##
|
|
[ms6931]
|
|
|
|
# device to use [default: /dev/ttyS1]
|
|
Device=/dev/ttyS1
|
|
|
|
# display size [default: 16x2]
|
|
#Size=16x2
|
|
|
|
|
|
|
|
## MTC-S16209x driver ##
|
|
[mtc_s16209x]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/lcd
|
|
|
|
# Set the initial brightness [default: 255; legal: 0 - 255]
|
|
Brightness=255
|
|
|
|
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
|
|
Reboot=no
|
|
|
|
|
|
|
|
## Matrix Orbital driver ##
|
|
[MtxOrb]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/ttyS0
|
|
|
|
# Set the display size [default: 20x4]
|
|
Size=20x4
|
|
|
|
# Switch on the backlight? [default: yes]
|
|
# NOTE: The driver will ignore this if the display is a vfd or vkd
|
|
# as they crash if the backlight is turned off
|
|
Backlight=yes
|
|
|
|
# Set the initial contrast [default: 480]
|
|
# NOTE: The driver will ignore this if the display
|
|
# is a vfd or vkd as they don't have this feature
|
|
Contrast=800
|
|
|
|
# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
|
|
Speed=19200
|
|
|
|
# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
|
|
Type=lkd
|
|
|
|
# The following table translate from MtxOrb Key to Logical Key.
|
|
# See [input] section for an explanation of the key mappings
|
|
# This is a new implementation in 0.5
|
|
LeftKey=A
|
|
RightKey=B
|
|
EnterKey=C
|
|
UpKey=D
|
|
DownKey=E
|
|
EscapeKey=F
|
|
|
|
# You can find out which key of your display sends which
|
|
# character by setting keypad_test_mode to yes and running
|
|
# LCDd. LCDd will output all characters it receives.
|
|
# Afterwards you can modify the settings above and set
|
|
# keypad_set_mode to no again.
|
|
keypad_test_mode=no
|
|
|
|
|
|
|
|
## Noritake VFD driver ##
|
|
[NoritakeVFD]
|
|
# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
|
|
Device=/dev/ttyS0
|
|
|
|
# Specifies the size of the LCD.
|
|
Size=20x4
|
|
|
|
# set the brightness
|
|
Brightness=255
|
|
|
|
# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
|
|
Speed=9600
|
|
|
|
# re-initialize VFD ?
|
|
#Reboot=yes
|
|
|
|
|
|
|
|
## Pyramid LCD driver ##
|
|
[pyramid]
|
|
|
|
# device to connect to [default: /dev/lcd]
|
|
Device=/dev/ttyUSB0
|
|
|
|
|
|
|
|
## Seiko Epson 1330 driver ##
|
|
[sed1330]
|
|
|
|
# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
|
|
Port=0x378
|
|
|
|
# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
|
|
# Note: G321D is the only one that is tested currently.
|
|
Type=G321D
|
|
|
|
|
|
|
|
## Seiko Epson 1520 driver ##
|
|
[sed1520]
|
|
|
|
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
|
|
Port=0x378
|
|
|
|
|
|
|
|
## Serial VFD driver ##
|
|
## Drives various (see below) serial 5x7dot VFD's. ##
|
|
[serialVFD]
|
|
|
|
# Specifies the displaytype.[default: 0]
|
|
# 0 NEC (FIPC8367 based) VFDs.
|
|
# 1 KD Rev 2.1.
|
|
# 2 Noritake VFDs (*).
|
|
# 3 Futaba VFDs
|
|
# (* most should work, not testet yet.)
|
|
Type=0
|
|
|
|
# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
|
|
use_parallel=no
|
|
|
|
# Number of Custom-Characters [default: displaytype dependent]
|
|
#Custom-Characters=0
|
|
|
|
# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
|
|
Port=0x378
|
|
|
|
# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
|
|
Device=/dev/ttyS1
|
|
|
|
# Specifies the size of the VFD.
|
|
Size=20x2
|
|
|
|
# Set the initial brightness [default: 1000; legal: 0 - 1000]
|
|
# (4 steps 0-250, 251-500, 501-750, 751-1000)
|
|
Brightness=1000
|
|
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
# (4 steps 0-250, 251-500, 501-750, 751-1000)
|
|
OffBrightness=0
|
|
|
|
# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
|
|
Speed=9600
|
|
|
|
# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
|
|
#ISO_8859_1=yes
|
|
|
|
|
|
|
|
## stv5730 driver ##
|
|
[stv5730]
|
|
|
|
# Port the device is connected to [default: 0x378]
|
|
Port=0x378
|
|
|
|
|
|
|
|
## SVGAlib driver ##
|
|
[svga]
|
|
|
|
# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
|
|
#Mode=G640x480x256
|
|
|
|
# set display size [default: 20x4]
|
|
Size=20x4
|
|
|
|
# Set the initial contrast [default: 500; legal: 0 - 1000]
|
|
# Can be set but does not change anything internally
|
|
Contrast=500
|
|
|
|
# Set the initial brightness [default: 1000; legal: 1 - 1000]
|
|
Brightness=1000
|
|
|
|
# Set the initial off-brightness [default: 500; legal: 1 - 1000]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
OffBrightness=500
|
|
|
|
|
|
|
|
## Text driver ##
|
|
[text]
|
|
# Set the display size [default: 20x4]
|
|
Size=20x4
|
|
|
|
|
|
|
|
## Toshiba T6963 driver ##
|
|
[t6963]
|
|
|
|
# set display size [default: 20x6]
|
|
Size=20x6
|
|
|
|
# port to use [default: 0x378; legal: 0x200 - 0x400]
|
|
Port=0x378
|
|
|
|
# Is ECP mode on? [default: yes; legal: yes, no]
|
|
#ECPlpt=yes
|
|
|
|
# Use graphics? [default: no; legal: yes, no]
|
|
#graphic=no
|
|
|
|
|
|
|
|
## Tyan Barebones LCD driver (GS10 & GS12 series) ##
|
|
[tyan]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/lcd
|
|
|
|
# Set the communication speed [default: 9600; legal: 4800, 9600]
|
|
Speed=9600
|
|
|
|
# set display size [default: 16x2]
|
|
Size=16x2
|
|
|
|
|
|
|
|
## ELV ula200 driver ##
|
|
[ula200]
|
|
|
|
# Select the LCD size [default: 20x4]
|
|
Size=20x4
|
|
|
|
# If you have a non standard keypad you can associate any keystrings to keys.
|
|
# There are 6 input key in the CwLnx hardware that generate characters
|
|
# from 'A' to 'F'.
|
|
#
|
|
# The following it the built-in default mapping hardcoded in the driver.
|
|
# You can leave those unchanged if you have a standard keypad.
|
|
# You can change it if you want to report other keystrings or have a non
|
|
# standard keypad.
|
|
# KeyMap_A=Up
|
|
# KeyMap_B=Down
|
|
# KeyMap_C=Left
|
|
# KeyMap_D=Right
|
|
# KeyMap_E=Enter
|
|
# KeyMap_F=Escape
|
|
|
|
|
|
|
|
## Wirz SLI LCD driver ##
|
|
[sli]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/lcd
|
|
|
|
# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
|
|
Speed=19200
|
|
|
|
|
|
|
|
## OnScreen Display using libxosd ##
|
|
[xosd]
|
|
|
|
# set display size [default: 20x4]
|
|
Size=20x4
|
|
|
|
# font to use
|
|
Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
|
|
|
|
# EOF
|