Files
lcdproc/server/drivers/hd44780-serial.h
T

52 lines
2.3 KiB
C

#ifndef HD44780_SERIAL_H
#define HD44780_SERIAL_H
#include "lcd.h" /* for Driver */
#include "hd44780-low.h"
#define SERIALIF_NAME_LENGTH 20
#define DEFAULT_DEVICE "/dev/lcd"
typedef struct SerialInterface {
int connectiontype;
char instruction_escape;
char data_escape;
char data_escape_min; /* escaped data lower limit */
char data_escape_max; /* escaped data upper limit */
unsigned int default_bitrate;
char if_bits;
char keypad;
char keypad_escape;
char backlight;
/*
if both escape and on/off codes are set means that display
can't set brightness, but can only switch light on or off and
needs both escape and on/off bytes (see pertelian,
http://pertelian.com/index.php?option=com_content&task=view&id=27&Itemid=33)
*/
char backlight_escape; /* leave to 0 is the interface uses on/off codes */
char backlight_off;
char backlight_on; /* leave these two to 0 is backlight_escape is set */
char multiple_displays;
char end_code; /* code to send on shutdown */
} SerialInterface;
/* List of connectiontypes managed by this driver, if you change
something here, remember also to change hd44780-drivers.h */
static const SerialInterface serial_interfaces[] = {
/* type instr data v ^ bitrate bits K esc B Besc Boff Bon Multi End */
{ HD44780_CT_PICANLCD, 0x11, 0x12, 0x00, 0x20, 9600, 8, 0, 0x00, 0, 0, 0, 0, 0, 0 },
{ HD44780_CT_LCDSERIALIZER, 0xFE, 0, 0x00, 0x00, 9600, 8, 0, 0x00, 0, 0, 0, 0, 0, 0 },
{ HD44780_CT_LOS_PANEL, 0xFE, 0, 0x00, 0x00, 9600, 4, 1, 0xFE, 1, 0xFF, 0, 0, 0, 0 },
{ HD44780_CT_VDR_LCD, 0xFE, 0, 0x00, 0x00, 9600, 4, 0, 0x00, 0, 0, 0, 0, 0, 0 },
{ HD44780_CT_VDR_WAKEUP, 0xC0, 0xC4, 0xC0, 0xD0, 9600, 4, 0, 0x00, 1, 0, 0xC9, 0xC8, 1, 0xCF },
{ HD44780_CT_PERTELIAN, 0xFE, 0, 0x00, 0x00, 9600, 8, 0, 0x00, 1, 0xFE, 0x02, 0x03, 0, 0 },
{ HD44780_CT_UNKNOWN, 0x00, 0, 0x00, 0x00, 0, 0, 0, 0, 0, 0x00, 0x00, 0x00, 0, 0 }
};
/* initialize this particular driver */
int hd_init_serial(Driver *drvthis);
#endif