1396 lines
38 KiB
Plaintext
1396 lines
38 KiB
Plaintext
# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
|
|
#
|
|
# This file contains the configuration for the LCDd server.
|
|
#
|
|
# The format is ini-file-like. It is divided into sections that start at
|
|
# markers that look like [section]. Comments are all line-based comments,
|
|
# and are lines that start with '#' or ';'.
|
|
#
|
|
# The server has a 'central' section named [server]. For the menu there is
|
|
# a section called [menu]. Further each driver has a section which
|
|
# defines how the driver acts.
|
|
#
|
|
# The drivers are activated by specifying them in a driver= line in the
|
|
# server section, like:
|
|
#
|
|
# Driver=curses
|
|
#
|
|
# This tells LCDd to use the curses driver.
|
|
# The first driver that is loaded and is capable of output defines the
|
|
# size of the display. The default driver to use is curses.
|
|
# If the driver is specified using the -d <driver> command line option,
|
|
# the Driver= options in the config file are ignored.
|
|
#
|
|
# The drivers read their own options from the respective sections.
|
|
|
|
|
|
|
|
## Server section with all kinds of settings for the LCDd server ##
|
|
[server]
|
|
|
|
# Where can we find the driver modules ?
|
|
# IMPORTANT: Make sure to change this setting to reflect your
|
|
# specific setup! Otherwise LCDd won't be able to find
|
|
# the driver modules and will thus not be able to
|
|
# function properly.
|
|
# NOTE: Always place a slash as last character !
|
|
DriverPath=server/drivers/
|
|
|
|
# Tells the server to load the given drivers. Multiple lines can be given.
|
|
# The name of the driver is case sensitive and determines the section
|
|
# where to look for further configuration options of the specific driver
|
|
# as well as the name of the dynamic driver module to load at runtime.
|
|
# The latter one can be changed by giving a File= directive in the
|
|
# driver specific section.
|
|
#
|
|
# The following drivers are supported:
|
|
# bayrad, CFontz, CFontzPacket, curses, CwLnx, ea65, EyeboxOne, g15, glcd,
|
|
# glcdlib, glk, hd44780, icp_a106, imon, imonlcd,, IOWarrior, irman, joy,
|
|
# lb216, lcdm001, lcterm, linux_input, lirc, lis, MD8800, mdm166a, ms6931,
|
|
# mtc_s16209x, MtxOrb, mx5000, NoritakeVFD, Olimex_MOD_LCD1x9, picolcd,
|
|
# pyramid, rawserial, sdeclcd, sed1330, sed1520, serialPOS, serialVFD,
|
|
# shuttleVFD, sli, stv5730, svga, t6963, text, tyan, ula200, vlsys_m428,
|
|
# xosd, yard2LCD
|
|
Driver=curses
|
|
|
|
# Tells the driver to bind to the given interface. [default: 127.0.0.1]
|
|
Bind=127.0.0.1
|
|
|
|
# Listen on this specified port. [default: 13666]
|
|
Port=13666
|
|
|
|
# Sets the reporting level; defaults to warnings and errors only.
|
|
# [default: 2; legal: 0-5]
|
|
#ReportLevel=3
|
|
|
|
# Should we report to syslog instead of stderr? [default: no; legal: yes, no]
|
|
#ReportToSyslog=yes
|
|
|
|
# User to run as. LCDd will drop its root privileges and run as this user
|
|
# instead. [default: nobody]
|
|
User=nobody
|
|
|
|
# The server will stay in the foreground if set to yes.
|
|
# [default: no, legal: yes, no]
|
|
#Foreground=yes
|
|
|
|
# Hello message: each entry represents a display line; default: builtin
|
|
#Hello=" Welcome to"
|
|
#Hello=" LCDproc!"
|
|
|
|
# GoodBye message: each entry represents a display line; default: builtin
|
|
#GoodBye="Thanks for using"
|
|
#GoodBye=" LCDproc!"
|
|
|
|
# Sets the default time in seconds to displays a screen. [default: 4]
|
|
WaitTime=5
|
|
|
|
# If set to no, LCDd will start with screen rotation disabled. This has the
|
|
# same effect as if the ToggleRotateKey had been pressed. Rotation will start
|
|
# if the ToggleRotateKey is pressed. Note that this setting does not turn off
|
|
# priority sorting of screens. [default: on; legal: on, off]
|
|
#AutoRotate=off
|
|
|
|
# If yes, the the serverscreen will be rotated as a usual info screen. If no,
|
|
# it will be a background screen, only visible when no other screens are
|
|
# active. The special value 'blank' is similar to no, but only a blank screen
|
|
# is displayed. [default: on; legal: on, off, blank]
|
|
#ServerScreen=off
|
|
|
|
# Set master backlight setting. If set to 'open' a client may control the
|
|
# backlight for its own screens (only). [default: open; legal: off, open, on]
|
|
#Backlight=open
|
|
|
|
# Set master heartbeat setting. If set to 'open' a client may control the
|
|
# heartbeat for its own screens (only). [default: open; legal: off, open, on]
|
|
#Heartbeat=open
|
|
|
|
# set title scrolling speed [default: 10; legal: 0-10]
|
|
#TitleSpeed=10
|
|
|
|
# The "...Key=" lines define what the server does with keypresses that
|
|
# don't go to any client. The ToggleRotateKey stops rotation of screens, while
|
|
# the PrevScreenKey and NextScreenKey go back / forward one screen (even if
|
|
# rotation is disabled.
|
|
# Assign the key string returned by the driver to the ...Key setting. These
|
|
# are the defaults:
|
|
ToggleRotateKey=Enter
|
|
PrevScreenKey=Left
|
|
NextScreenKey=Right
|
|
#ScrollUpKey=Up
|
|
#ScrollDownKey=Down
|
|
|
|
|
|
## The menu section. The menu is an internal LCDproc client. ##
|
|
[menu]
|
|
# You can configure what keys the menu should use. Note that the MenuKey
|
|
# will be reserved exclusively, the others work in shared mode.
|
|
|
|
# Up to six keys are supported. The MenuKey (to enter and exit the menu), the
|
|
# EnterKey (to select values) and at least one movement keys are required.
|
|
# These are the default key assignments:
|
|
MenuKey=Escape
|
|
EnterKey=Enter
|
|
UpKey=Up
|
|
DownKey=Down
|
|
#LeftKey=Left
|
|
#RightKey=Right
|
|
|
|
|
|
### Driver sections are below this line, in alphabetical order ###
|
|
|
|
|
|
## EMAC BayRAD driver ##
|
|
[bayrad]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/lcd
|
|
|
|
# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200]
|
|
Speed=9600
|
|
|
|
|
|
|
|
## CrystalFontz driver (for CF632 & CF634) ##
|
|
[CFontz]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/ttyS0
|
|
# Select the LCD size [default: 20x4]
|
|
Size=20x4
|
|
# Set the initial contrast [default: 560; legal: 0 - 1000]
|
|
Contrast=350
|
|
# Set the initial brightness [default: 1000; legal: 0 - 1000]
|
|
Brightness=1000
|
|
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
OffBrightness=0
|
|
# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200,
|
|
# 115200]
|
|
Speed=9600
|
|
# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
|
|
NewFirmware=no
|
|
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
|
|
# normally you shouldn't need this
|
|
Reboot=no
|
|
|
|
|
|
|
|
## CrystalFontz packet driver (for CFA533, CFA631, CFA633 & CFA635) ##
|
|
[CFontzPacket]
|
|
|
|
# Select the LCD model [default: 633; legal: 533, 631, 633, 635]
|
|
Model=633
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/ttyUSB0
|
|
|
|
# Set the initial contrast [default: 560; legal: 0 - 1000]
|
|
Contrast=350
|
|
|
|
# Set the initial brightness [default: 1000; legal: 0 - 1000]
|
|
Brightness=1000
|
|
|
|
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
OffBrightness=50
|
|
|
|
# Reinitialize the LCD's BIOS on driver start. [default: no; legal: yes, no]
|
|
Reboot=yes
|
|
|
|
# Enable the USB flag if the device is connected to an USB port. For
|
|
# serial ports leave it disabled. [default: no; legal: yes, no]
|
|
#USB=yes
|
|
|
|
# Very old 633 firmware versions do not support partial screen updates using
|
|
# 'Send Data to LCD' command (31). For those devices it may be necessary to
|
|
# enable this flag. [default: no; legal: yes, no]
|
|
#OldFirmware=yes
|
|
|
|
# Override the LCD size known for the selected model. Usually setting this
|
|
# value should not be necessary.
|
|
#Size=20x4
|
|
|
|
# Override the default communication speed known for the selected model.
|
|
# Default value depends on model [legal: 19200, 115200]
|
|
#Speed=115200
|
|
|
|
|
|
|
|
## Curses driver ##
|
|
[curses]
|
|
|
|
# color settings
|
|
# foreground color [default: blue]
|
|
Foreground=blue
|
|
# background color when "backlight" is off [default: cyan]
|
|
Background=cyan
|
|
# background color when "backlight" is on [default: red]
|
|
Backlight=red
|
|
|
|
# display size [default: 20x4]
|
|
Size=20x4
|
|
|
|
# What position (X,Y) to start the left top corner at...
|
|
# Default: (7,7)
|
|
TopLeftX=7
|
|
TopLeftY=7
|
|
|
|
# use ASC symbols for icons & bars [default: no; legal: yes, no]
|
|
UseACS=no
|
|
|
|
# draw Border [default: yes; legal: yes, no]
|
|
DrawBorder=yes
|
|
|
|
|
|
|
|
## Cwlinux driver ##
|
|
[CwLnx]
|
|
|
|
# Select the LCD model [default: 12232; legal: 12232, 12832, 1602]
|
|
Model=12232
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/ttyUSB0
|
|
|
|
# Select the LCD size. Default depends on model:
|
|
# 12232: 20x4
|
|
# 12832: 21x4
|
|
# 1602: 16x2
|
|
Size=20x4
|
|
|
|
# Set the communication speed [default: 19200; legal: 9600, 19200]
|
|
Speed=19200
|
|
|
|
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
|
|
# normally you shouldn't need this
|
|
Reboot=no
|
|
|
|
# If you have a keypad connected. Keypad layout is currently not
|
|
# configureable from the config file.
|
|
Keypad=yes
|
|
|
|
# If you have a non-standard keypad you can associate any keystrings to keys.
|
|
# There are 6 input keys in the CwLnx hardware that generate characters
|
|
# from 'A' to 'F'.
|
|
#
|
|
# The following is the built-in default mapping hardcoded in the driver.
|
|
# You can leave those unchanged if you have a standard keypad.
|
|
# You can change it if you want to report other keystrings or have a non
|
|
# standard keypad.
|
|
# KeyMap_A=Up
|
|
# KeyMap_B=Down
|
|
# KeyMap_C=Left
|
|
# KeyMap_D=Right
|
|
# KeyMap_E=Enter
|
|
# KeyMap_F=Escape
|
|
|
|
# keypad_test_mode permits one to test keypad assignment
|
|
# Default value is no
|
|
#keypad_test_mode=yes
|
|
|
|
|
|
|
|
## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ##
|
|
[ea65]
|
|
|
|
# Device is fixed /dev/ttyS1
|
|
# Width and Height are fixed 9x1
|
|
|
|
# As the VFD is self luminescent we don't have a backlight
|
|
# But we can use the backlight functions to control the front LEDs
|
|
# Brightness 0 to 299 -> LEDs off
|
|
# Brightness 300 to 699 -> LEDs half bright
|
|
# Brightness 700 to 1000 -> LEDs full bright
|
|
Brightness=500
|
|
# OffBrightness is the the value used for the 'backlight off' state
|
|
OffBrightness=0
|
|
|
|
|
|
|
|
## EyeboxOne driver ##
|
|
[EyeboxOne]
|
|
|
|
# Select the output device to use [default: /dev/ttyS1]
|
|
#Device=/dev/cua01
|
|
Device=/dev/ttyS1
|
|
|
|
# Set the display size [default: 20x4]
|
|
Size=20x4
|
|
|
|
# Switch on the backlight? [default: yes]
|
|
Backlight=yes
|
|
|
|
# Switch on the cursor? [default: no]
|
|
Cursor=no
|
|
|
|
# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
|
|
Speed=19200
|
|
|
|
# Enter Key is a \r character, so it's hardcoded in the driver
|
|
LeftKey=D
|
|
RightKey=C
|
|
UpKey=A
|
|
DownKey=B
|
|
EscapeKey=P
|
|
|
|
# You can find out which key of your display sends which
|
|
# character by setting keypad_test_mode to yes and running
|
|
# LCDd. LCDd will output all characters it receives.
|
|
# Afterwards you can modify the settings above and set
|
|
# keypad_set_mode to no again.
|
|
keypad_test_mode=no
|
|
|
|
|
|
|
|
## g15 driver for Logitech G15 Keyboard LCDs ##
|
|
[g15]
|
|
|
|
# Display size (currently unused)
|
|
size=20x5
|
|
|
|
|
|
|
|
## glcd generic graphical display driver
|
|
[glcd]
|
|
# Select what type of connection. See documentation for types.
|
|
ConnectionType=t6963
|
|
|
|
# Width and height of the display in pixel. The supported sizes may depend on
|
|
# the ConnectionType. [default: 128x64; legal: 1x1 - 640x480]
|
|
#Size=128x64
|
|
|
|
# Width and height of a character cell in pixels. This value is only used if
|
|
# the driver has been compiled with FreeType and it is enabled. Otherwise the
|
|
# default 6x8 cell is used.
|
|
#CellSize=12x16
|
|
|
|
# If LCDproc has been compiled with FreeType 2 support this option can be used
|
|
# to turn if off intentionally. [default: yes; legal: yes, no]
|
|
#useFT2=no
|
|
|
|
# Path to font file to use for FreeType rendering. This font must be monospace
|
|
# and should contain some special Unicode characters like arrows (Andale Mono
|
|
# is recommended and can be fetched at http://corefonts.sf.net).
|
|
#normal_font=/usr/local/lib/X11/fonts/TTF/andalemo.ttf
|
|
|
|
# Some fonts miss the Unicode characters used to represent icons. In this case
|
|
# the built-in 5x8 font can used if this option is turned off. [default: yes;
|
|
# legal: yes, no]
|
|
#fontHasIcons=no
|
|
|
|
# Set the initial contrast if supported by connection type.
|
|
# [default: 600; legal: 0 - 1000]
|
|
#Contrast=600
|
|
|
|
# Set brightness of the backlight if the backlight is switched 'on'.
|
|
# [default: 800; legal: 0 - 1000]
|
|
#Brightness=1000
|
|
|
|
# Set brightness of the backlight if the backlight is switched 'off'. Set this
|
|
# to zero to completely turn off the backlight. [default: 100; legal: 0 - 1000]
|
|
#OffBrightness=0
|
|
|
|
# Time (ms) from first key report to first repeat. Set to 0 to disable repeated
|
|
# key reports. [default: 500; legal: 0 - 3000]
|
|
#KeyRepeatDelay=500
|
|
|
|
# Time (ms) between repeated key reports. Ignored if KeyRepeatDelay is disabled
|
|
# (set to zero). [default: 300; legal: 0 - 3000]
|
|
#KeyRepeatInterval=300
|
|
|
|
# Assign key strings to keys. There may be up to 16 keys numbered 'A' to 'Z'.
|
|
# By default keys 'A' to 'F' are assigned Up, Down, Left, Right, Enter, Escape.
|
|
KeyMap_A=Up
|
|
KeyMap_B=Down
|
|
KeyMap_C=Enter
|
|
KeyMap_D=Escape
|
|
|
|
# --- t6963 options ---
|
|
|
|
# Parallel port to use [default: 0x378; legal: 0x200 - 0x400]
|
|
#Port=0x378
|
|
|
|
# Use LPT port in bi-directional mode. This should work on most LPT port
|
|
# and is required for proper timing! [default: yes; legal: yes, no]
|
|
#bidirectional=yes
|
|
|
|
# Insert additional delays into reads / writes. [default: no; legal: yes, no]
|
|
#delayBus=no
|
|
|
|
# --- serdisplib options ---
|
|
|
|
# Name of the underlying serdisplib driver, e.g. ctinclud. See
|
|
# serdisplib documentation for details.
|
|
serdisp_name=t6963
|
|
|
|
# The display device to use, e.g. serraw:/dev/ttyS0,
|
|
# parport:/dev/parport0 or USB:07c0/1501.
|
|
serdisp_device=/dev/ppi0
|
|
|
|
# Options string to pass to serdisplib during initialization. Use
|
|
# this to set any display related options (e.g. wiring). The display size is
|
|
# always set based on the Size configured above! By default, no options are
|
|
# set.
|
|
# Important: The value must be quoted as it contains equal signs!
|
|
#serdisp_options="INVERT=1"
|
|
|
|
# --- x11 options ---
|
|
|
|
# PixelSize is size of each dot in pixels + a pixel gap. [default: 3+1]
|
|
#x11_PixelSize=3+1
|
|
|
|
# Colors are in RRGGBB format prefixed with "0x".
|
|
# PixelColor: The color of each dot at full contrast. [default: 0x000000]
|
|
#x11_PixelColor=0x000000
|
|
|
|
# BacklightColor: The color of the backlight as full brightness.
|
|
# [default: 0x80FF80]
|
|
#x11_BacklightColor=0x80FF80
|
|
|
|
# Border: Adds a border (empty space) around the LCD portion of X11 window.
|
|
# [default: 20]
|
|
#x11_Border=20
|
|
|
|
# Inverted: inverts the pixels [default: no; legal: yes, no]
|
|
#x11_Inverted=no
|
|
|
|
# --- picolcdgfx options ---
|
|
|
|
# Time in ms for usb_read to wait on a key press. [default: 125; legal: >0]
|
|
#picolcdgfx_KeyTimeout=125
|
|
|
|
# Inverted: Inverts the pixels. [default: no; legal: yes or no]
|
|
#picolcdgfx_Inverted=no
|
|
|
|
|
|
|
|
## glcdlib meta driver for graphical LCDs ##
|
|
[glcdlib]
|
|
|
|
## mandatory:
|
|
|
|
# which graphical display supported by graphlcd-base to use [default: image]
|
|
# (see /etc/graphlcd.conf for possible drivers)
|
|
Driver=noritake800
|
|
|
|
# no=use graphlcd bitmap fonts (they have only one size / font file)
|
|
# yes=use fonts supported by FreeType2 (needs Freetype2 support in
|
|
# libglcdprocdriver and its dependants)
|
|
UseFT2=yes
|
|
|
|
# text resolution in fixed width characters [default: 16x4]
|
|
# (if it won't fit according to available physical pixel resolution
|
|
# and the minimum available font face size in pixels, then
|
|
# 'DebugBorder' will automatically be turned on)
|
|
TextResolution=20x4
|
|
|
|
# path to font file to use
|
|
FontFile=/usr/share/fonts/corefonts/courbd.ttf
|
|
|
|
## these only apply if UseFT2=yes:
|
|
|
|
# character encoding to use
|
|
CharEncoding=iso8859-2
|
|
|
|
# minimum size in pixels in which fonts should be rendered
|
|
MinFontFaceSize=7x12
|
|
|
|
## optional:
|
|
Brightness=50 # Brightness (in %) if applicable
|
|
Contrast=50 # Contrast (in %) if applicable
|
|
Backlight=no # Backlight if applicable
|
|
UpsideDown=no # flip image upside down
|
|
Invert=no # invert light/dark pixels
|
|
ShowDebugFrame=no # turns on/off 1 pixel thick debugging
|
|
# border within the usable text area,
|
|
# for setting up TextResolution and
|
|
# MinFontFaceSize (if using FT2);
|
|
ShowBigBorder=no # border around the unused area
|
|
ShowThinBorder=yes # border around the unused area
|
|
PixelShiftX=0
|
|
PixelShiftY=2
|
|
|
|
|
|
|
|
## Matrix Orbital GLK driver ##
|
|
[glk]
|
|
|
|
# select the serial device to use [default: /dev/lcd]
|
|
Device=/dev/lcd
|
|
|
|
# set the initial contrast value [default: 560; legal: 0 - 1000]
|
|
Contrast=560
|
|
|
|
# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
|
|
Speed=19200
|
|
|
|
|
|
|
|
## Hitachi HD44780 driver ##
|
|
[hd44780]
|
|
|
|
# Select what type of connection. See documentation for availabe types.
|
|
ConnectionType=4bit
|
|
|
|
# I/O address of the LPT port. Usual values are: 0x278, 0x378 and 0x3BC.
|
|
# For I2C connections this sets the slave address (usually 0x20).
|
|
Port=0x378
|
|
|
|
# Device of the serial, I2C, or SPI interface [default: /dev/lcd]
|
|
Device=/dev/ttyS0
|
|
|
|
# Bitrate of the serial port (0 for interface default)
|
|
Speed=0
|
|
|
|
# If you have a keypad connected.
|
|
# You may also need to configure the keypad layout further on in this file.
|
|
Keypad=no
|
|
|
|
# Set the initial contrast (bwctusb, lcd2usb, and usb4all)
|
|
# [default: 800; legal: 0 - 1000]
|
|
#Contrast=0
|
|
|
|
# Set brightness of the backlight (lcd2usb and usb4all):
|
|
# Brightness is the brightness while the backlight is set to 'on'.
|
|
# [default: 800; legal: 0 - 1000]
|
|
#Brightness=1000
|
|
|
|
# OffBrightness is the brightness while the backlight is set to 'off'.
|
|
# [default: 300; legal: 0 - 1000]
|
|
#OffBrightness=0
|
|
|
|
# If you have a switchable backlight.
|
|
Backlight=no
|
|
|
|
# If you have the additional output port ("bargraph") and you want to
|
|
# be able to control it with the lcdproc OUTPUT command
|
|
OutputPort=no
|
|
|
|
# Specifies if the last line is pixel addressable (yes) or it controls an
|
|
# underline effect (no). [default: yes; legal: yes, no]
|
|
#Lastline=yes
|
|
|
|
# Specifies the size of the LCD.
|
|
# In case of multiple combined displays, this should be the total size.
|
|
Size=20x4
|
|
|
|
# For multiple combined displays: how many lines does each display have.
|
|
# Vspan=2,2 means both displays have 2 lines.
|
|
#vspan=2,2
|
|
|
|
# If you have an HD66712, a KS0073 or another controller with 'extended mode',
|
|
# set this flag to get into 4-line mode. On displays with just two lines, do
|
|
# not set this flag.
|
|
# As an additional restriction, controllers with and without extended mode
|
|
# AND 4 lines cannot be mixed for those connection types that support more
|
|
# than one display!
|
|
#ExtendedMode=yes
|
|
|
|
# In extended mode, on some controllers like the ST7036 (in 3 line mode)
|
|
# the next line in DDRAM won't start 0x20 higher. [default: 0x20]
|
|
#LineAddress=0x10
|
|
|
|
# Character map to to map ISO-8859-1 to the LCD's character set
|
|
# [default: hd44780_default; legal: hd44780_default, hd44780_euro, ea_ks0073,
|
|
# sed1278f_0b, hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5, upd16314 ]
|
|
# (hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5 and upd16314 are possible if
|
|
# compiled with additional charmaps)
|
|
CharMap=hd44780_default
|
|
|
|
# If your display is slow and cannot keep up with the flow of data from
|
|
# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
|
|
# to increase the delays. Default: 1.
|
|
#DelayMult=2
|
|
|
|
# Some displays (e.g. vdr-wakeup) need a message from the driver to that it
|
|
# is still alive. When set to a value bigger then null the character in the
|
|
# upper left corner is updated every <KeepAliveDisplay> seconds. Default: 0.
|
|
#KeepAliveDisplay=0
|
|
|
|
# If you experience occasional garbage on your display you can use this
|
|
# option as workaround. If set to a value bigger than null it forces a
|
|
# full screen refresh <RefreshDiplay> seconds. Default: 0.
|
|
#RefreshDisplay=5
|
|
|
|
# You can reduce the inserted delays by setting this to false.
|
|
# On fast PCs it is possible your LCD does not respond correctly.
|
|
# Default: true.
|
|
DelayBus=true
|
|
|
|
# If you have a keypad you can assign keystrings to the keys.
|
|
# See documentation for used terms and how to wire it.
|
|
# For example to give directly connected key 4 the string "Enter", use:
|
|
# KeyDirect_4=Enter
|
|
# For matrix keys use the X and Y coordinates of the key:
|
|
# KeyMatrix_1_3=Enter
|
|
KeyMatrix_4_1=Enter
|
|
KeyMatrix_4_2=Up
|
|
KeyMatrix_4_3=Down
|
|
KeyMatrix_4_4=Escape
|
|
|
|
|
|
|
|
## ICP A106 driver ##
|
|
[icp_a106]
|
|
Device=/dev/ttyS1
|
|
|
|
|
|
|
|
## Code Mercenaries IO-Warrior driver ##
|
|
[IOWarrior]
|
|
|
|
# display dimensions
|
|
Size=20x4
|
|
|
|
# serial number. Must be exactly as listed by usbview
|
|
# (if not given, the 1st IOWarrior found gets used)
|
|
#SerialNumber=00000674
|
|
|
|
# If you have an HD66712, a KS0073 or another 'almost HD44780-compatible',
|
|
# set this flag to get into extended mode (4-line linear).
|
|
#ExtendedMode=yes
|
|
|
|
# Specifies if the last line is pixel addressable (yes) or it controls an
|
|
# underline effect (no). [default: yes; legal: yes, no]
|
|
#Lastline=yes
|
|
|
|
|
|
|
|
## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
|
|
[imon]
|
|
|
|
# select the device to use
|
|
Device=/dev/lcd0
|
|
|
|
# display dimensions
|
|
Size=16x2
|
|
|
|
# Character map to to map ISO-8859-1 to the displays character set.
|
|
# [default: none; legal: none, hd44780_euro, upd16314, hd44780_koi8_r,
|
|
# hd44780_cp1251, hd44780_8859_5 ] (upd16314, hd44780_koi8_r,
|
|
# hd44780_cp1251, hd44780_8859_5 are possible if compiled with additional
|
|
# charmaps)
|
|
CharMap=hd44780_euro
|
|
|
|
## Soundgraph iMON LCD ##
|
|
[imonlcd]
|
|
# Specify which iMon protocol should be used
|
|
# [legal: 0, 1; default: 0]
|
|
# Choose 0 for 15c2:ffdc device,
|
|
# Choose 1 for 15c2:0038 device
|
|
Protocol=0
|
|
|
|
# Set the exit behavior [legal: 0-2; default: 1]
|
|
# 0 means leave shutdown message,
|
|
# 1 means show the big clock,
|
|
# 2 means blank device
|
|
#OnExit=2
|
|
|
|
# Select the output device to use [default: /dev/lcd0]
|
|
Device=/dev/lcd0
|
|
|
|
# Select the displays contrast [default: 200; legal: 0-1000]
|
|
Contrast=200
|
|
|
|
# Specify the size of the display in pixels [default: 96x16]
|
|
#Size=96x16
|
|
|
|
# Set the backlight state [default: on; legal: on, off]
|
|
#Backlight=on
|
|
|
|
# Set the disc mode [legal: 0,1; default: 0]
|
|
# 0 => spin the "slim" disc - two disc segments,
|
|
# 1 => their complement spinning;
|
|
#DiscMode=0
|
|
|
|
|
|
|
|
## IrMan driver ##
|
|
[IrMan]
|
|
# in case of trouble with IrMan, try the Lirc emulator for IrMan
|
|
|
|
# Select the input device to use
|
|
#Device=/dev/irman
|
|
|
|
# Select the configuration file to use
|
|
#Config=/etc/irman.cfg
|
|
|
|
|
|
|
|
## IRtrans driver ##
|
|
[irtrans]
|
|
|
|
# Does the device have a backlight? [default: no; legal: yes, no]
|
|
#Backlight=no
|
|
|
|
# IRTrans device to connect to [default: localhost]
|
|
#Hostname=localhost
|
|
|
|
# display dimensions
|
|
Size=16x2
|
|
|
|
|
|
|
|
## Joystick driver ##
|
|
[joy]
|
|
|
|
# Select the input device to use [default: /dev/js0]
|
|
Device=/dev/js0
|
|
|
|
# set the axis map
|
|
Map_Axis1neg=Left
|
|
Map_Axis1pos=Right
|
|
Map_Axis2neg=Up
|
|
Map_Axis2pos=Down
|
|
|
|
# set the button map
|
|
Map_Button1=Enter
|
|
Map_Button2=Escape
|
|
|
|
|
|
|
|
## LB216 driver ##
|
|
[lb216]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/lcd
|
|
|
|
# Set the initial brightness [default: 255; legal: 0 - 255]
|
|
Brightness=255
|
|
|
|
# Set the communication speed [default: 9600; legal: 2400, 9600]
|
|
Speed=9600
|
|
|
|
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
|
|
Reboot=no
|
|
|
|
|
|
|
|
## LCDM001 driver ##
|
|
[lcdm001]
|
|
|
|
Device=/dev/ttyS1
|
|
|
|
# keypad settings
|
|
# Keyname Function
|
|
# Normal context Menu context
|
|
# ------- -------------- ------------
|
|
# PauseKey Pause/Continue Enter/select
|
|
# BackKey Back(Go to previous screen) Up/Left
|
|
# ForwardKey Forward(Go to next screen) Down/Right
|
|
# MainMenuKey Open main menu Exit/Cancel
|
|
PauseKey=LeftKey
|
|
BackKey=UpKey
|
|
ForwardKey=DownKey
|
|
MainMenuKey=RightKey
|
|
|
|
# You can rearrange the settings here.
|
|
# If your device is broken, have a look at server/drivers/lcdm001.h
|
|
|
|
|
|
|
|
## HNE LCTerm driver ##
|
|
[lcterm]
|
|
Device=/dev/ttyS1
|
|
Size=16x2
|
|
|
|
|
|
## Linux event device input driver ##
|
|
[linux_input]
|
|
|
|
# Select the input device to use [default: /dev/input/event0]
|
|
Device=/dev/input/event0
|
|
|
|
# specify a non-default key map
|
|
#key=1,Escape
|
|
#key=28,Enter
|
|
#key=96,Enter
|
|
#key=105,Left
|
|
#key=106,Right
|
|
#key=103,Up
|
|
#key=108,Down
|
|
|
|
|
|
## LIRC input driver ##
|
|
[lirc]
|
|
|
|
# Specify an alternative location of the lircrc file [default: ~/.lircrc]
|
|
#lircrc=/etc/lircrc.lcdproc
|
|
|
|
# Must be the same as in your lircrc
|
|
#prog=lcdd
|
|
|
|
|
|
|
|
## LIS MCE 2005 driver ##
|
|
[lis]
|
|
|
|
# Set the initial brightness [default: 1000; legal: 0 - 1000]
|
|
# 0-250 = 25%, 251-500 = 50%, 501-750 = 75%, 751-1000 = 100%
|
|
#Brightness=1000
|
|
|
|
# Columns by lines [default: 20x2]
|
|
#Size=20x2
|
|
|
|
# USB Vendor ID [default: 0x0403]
|
|
# Change only if testing a compatible device.
|
|
#VendorID=0x0403
|
|
|
|
# USB Product ID [default: 0x6001]
|
|
# Change only if testing a compatible device.
|
|
#ProductID=0x6001
|
|
|
|
# Specifies if the last line is pixel addressable (yes) or it only controls an
|
|
# underline effect (no). [default: yes; legal: yes, no]
|
|
#Lastline=yes
|
|
|
|
|
|
|
|
##The driver for the VFD of the Medion MD8800 PC ##
|
|
[MD8800]
|
|
# device to use [default: /dev/ttyS1]
|
|
#Device=/dev/ttyS1
|
|
|
|
# display size [default: 16x2]
|
|
#Size=16x2
|
|
|
|
# Set the initial brightness [default: 1000; legal: 0 - 1000]
|
|
Brightness=1000
|
|
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
OffBrightness=50
|
|
|
|
|
|
|
|
## Futuba MDM166A Display
|
|
[mdm166a]
|
|
# Show self-running clock after LCDd shutdown
|
|
# Possible values: [default: no; legal: no, small, big]
|
|
Clock=big
|
|
# Dim display, no dimming gives full brightness [default: no, legal: yes, no]
|
|
Dimming=no
|
|
# Dim display in case LCDd is inactive [default: no, legal: yes, no]
|
|
OffDimming=yes
|
|
|
|
|
|
|
|
## MSI MS-6931 driver for displays in 1HU servers ##
|
|
[ms6931]
|
|
|
|
# device to use [default: /dev/ttyS1]
|
|
Device=/dev/ttyS1
|
|
|
|
# display size [default: 16x2]
|
|
#Size=16x2
|
|
|
|
|
|
|
|
## MTC-S16209x driver ##
|
|
[mtc_s16209x]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/lcd
|
|
|
|
# Set the initial brightness [default: 255; legal: 0 - 255]
|
|
Brightness=255
|
|
|
|
# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
|
|
Reboot=no
|
|
|
|
|
|
|
|
## Matrix Orbital driver ##
|
|
[MtxOrb]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/ttyS0
|
|
|
|
# Set the display size [default: 20x4]
|
|
Size=20x4
|
|
|
|
# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
|
|
Type=lkd
|
|
|
|
# Set the initial contrast [default: 480]
|
|
# NOTE: The driver will ignore this if the display
|
|
# is a vfd or vkd as they don't have this feature
|
|
Contrast=480
|
|
|
|
# Some old displays do not have an adjustable backlight but only can
|
|
# switch the backlight on/off. If you experience randomly appearing block
|
|
# characters, try setting this to false. [default: yes; legal: yes, no]
|
|
hasAdjustableBacklight=no
|
|
|
|
# Set the initial brightness [default: 1000; legal: 0 - 1000]
|
|
Brightness=1000
|
|
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
OffBrightness=0
|
|
|
|
# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
|
|
Speed=19200
|
|
|
|
# The following table translates from MtxOrb key letters to logical key names.
|
|
# By default no keys are mapped, meaning the keypad is not used at all.
|
|
#KeyMap_A=Left
|
|
#KeyMap_B=Right
|
|
#KeyMap_C=Up
|
|
#KeyMap_D=Down
|
|
#KeyMap_E=Enter
|
|
#KeyMap_F=Escape
|
|
# See the [menu] section for an explanation of the key mappings
|
|
|
|
# You can find out which key of your display sends which
|
|
# character by setting keypad_test_mode to yes and running
|
|
# LCDd. LCDd will output all characters it receives.
|
|
# Afterwards you can modify the settings above and set
|
|
# keypad_set_mode to no again.
|
|
keypad_test_mode=no
|
|
|
|
|
|
|
|
## mx5000 driver for LCD display on the Logitech MX5000 keyboard ##
|
|
[mx5000]
|
|
|
|
# Select the output device to use [default: /dev/hiddev0]
|
|
Device = /dev/hiddev0
|
|
# Time to wait in ms after the refresh screen has been sent [default: 1000]
|
|
WaitAfterRefresh = 1000
|
|
|
|
|
|
|
|
## Noritake VFD driver ##
|
|
[NoritakeVFD]
|
|
# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1
|
|
# [default: /dev/lcd]
|
|
Device=/dev/ttyS0
|
|
# Specifies the size of the LCD.
|
|
Size=20x4
|
|
# Set the initial brightness [default: 1000; legal: 0 - 1000]
|
|
Brightness=1000
|
|
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
OffBrightness=50
|
|
# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
|
|
Speed=9600
|
|
# Set serial data parity [default: 0; legal: 0-2 ]
|
|
# Meaning: 0(=none), 1(=odd), 2(=even)
|
|
Parity=0
|
|
# re-initialize the VFD [default: no; legal: yes, no]
|
|
Reboot=no
|
|
|
|
|
|
|
|
## Olimex MOD-LCD1x9 driver ##
|
|
[Olimex_MOD_LCD1x9]
|
|
|
|
# device file of the i2c controler
|
|
Device=/dev/i2c-0
|
|
|
|
|
|
## Mini-box.com picoLCD (usblcd) driver ##
|
|
[picolcd]
|
|
|
|
# KeyTimeout is only used if the picoLCD driver is built with libusb-0.1. When
|
|
# built with libusb-1.0 key and IR data is input asynchronously so there is no
|
|
# need to wait for the USB data.
|
|
# KeyTimeout is the time in ms that LCDd spends waiting for a key press before
|
|
# cycling through other duties. Higher values make LCDd use less CPU time and
|
|
# make key presses more detectable. Lower values make LCDd more responsive
|
|
# but a little prone to missing key presses. 500 (.5 second) is the default
|
|
# and a balanced value. [default: 500; legal: 0 - 1000]
|
|
KeyTimeout=500
|
|
|
|
# Key auto repeat is only available if the picoLCD driver is built with
|
|
# libusb-1.0. Use KeyRepeatDelay and KeyRepeatInterval to configure key auto
|
|
# repeat.
|
|
#
|
|
# Key auto repeat delay (time in ms from first key report to first repeat). Use
|
|
# zero to disable auto repeat. [default: 300; legal: 0 - 3000]
|
|
KeyRepeatDelay=300
|
|
|
|
# Key auto repeat interval (time in ms between repeat reports). Only used if
|
|
# KeyRepeatDelay is not zero. [default: 200; legal: 0 - 3000]
|
|
KeyRepeatInterval=200
|
|
|
|
# Sets the initial state of the backlight upon start-up.
|
|
# [default: on; legal: on, off]
|
|
#Backlight=on
|
|
|
|
# Set the initial brightness [default: 1000; legal: 0 - 1000]. Works only
|
|
# with the 20x4 device
|
|
Brightness=1000
|
|
|
|
# Set the brightness while the backlight is 'off' [default: 0; legal: 0 - 1000].
|
|
# Works only with the 20x4 device.
|
|
#OffBrightness=0
|
|
|
|
# Set the initial contrast [default: 1000; legal: 0 - 1000]
|
|
Contrast=1000
|
|
|
|
# Link the key lights to the backlight? [default: on; legal: on, off]
|
|
#LinkLights=off
|
|
|
|
# Light the keys? [default: on; legal: on, off]
|
|
Keylights=on
|
|
|
|
# If Keylights is on, the you can unlight specific keys below:
|
|
# Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys.
|
|
# There is no LED for the +/- keys. This is a handy way to indicate to users
|
|
# which keys are disabled. [default: on; legal: on, off]
|
|
Key0Light=on
|
|
Key1Light=on
|
|
Key2Light=on
|
|
Key3Light=on
|
|
Key4Light=on
|
|
Key5Light=on
|
|
|
|
# Host name or IP address of the LIRC instance that is to receive IR codes
|
|
# If not set, or set to an empty value, IR support is disabled.
|
|
#LircHost=127.0.0.1
|
|
|
|
# UDP port on which LIRC is listening [default: 8765; legal: 1 - 65535]
|
|
LircPort=8765
|
|
|
|
# UDP data time unit for LIRC [default: off; legal: on, off]
|
|
# On: times sent in microseconds (requires LIRC UDP driver that accepts this).
|
|
# Off: times sent in 'jiffies' (1/16384s) (supported by standard LIRC UDP driver).
|
|
LircTime_us=on
|
|
|
|
# Threshold in microseconds of the gap that triggers flushing the IR data
|
|
# to lirc [default: 8000; legal: 1000 - ]
|
|
# If LircTime_us is on values greater than 32.767ms will disable the flush
|
|
# If LircTime_us is off values greater than 1.999938s will disable the flush
|
|
LircFlushThreshold=10000
|
|
|
|
|
|
|
|
## Pyramid LCD driver ##
|
|
[pyramid]
|
|
|
|
# device to connect to [default: /dev/lcd]
|
|
Device=/dev/ttyUSB0
|
|
|
|
|
|
|
|
## rawserial driver ##
|
|
[rawserial]
|
|
|
|
# Select the output device to use [default: /dev/cuaU0]
|
|
Device=/dev/ttyS0
|
|
|
|
# Serial port baudrate [default: 9600]
|
|
Speed=9600
|
|
|
|
# Specifies the size of the LCD. If this driver is loaded as a secondary driver
|
|
# it always adopts to the size of the primary driver. If loaded as the only
|
|
# (or primary) driver, the size can be set. [default: 40x4]
|
|
#Size=16x2
|
|
|
|
# How often to dump the LCD contents out the port, in Hertz (times per second)
|
|
# 1 = once per second, 4 is 4 times per second, 0.1 is once every 10 seconds.
|
|
# [default: 1; legal: 0.0005 - 10]
|
|
UpdateRate=1
|
|
|
|
|
|
|
|
## SDEC driver for Watchguard Firebox ##
|
|
[sdeclcd]
|
|
# No options
|
|
|
|
|
|
|
|
## Seiko Epson 1330 driver ##
|
|
[sed1330]
|
|
|
|
# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
|
|
Port=0x378
|
|
|
|
# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002)
|
|
# Note: Currently only tested with G321D & SP14Q002.
|
|
Type=G321D
|
|
|
|
# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10]
|
|
CellSize=6x10
|
|
|
|
# Select what type of connection [legal: classic, bitshaker; default: classic]
|
|
ConnectionType=classic
|
|
|
|
|
|
|
|
## Seiko Epson 1520 driver ##
|
|
[sed1520]
|
|
|
|
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
|
|
Port=0x378
|
|
|
|
# Select the interface type (wiring) for the display. Supported values are
|
|
# 68 for 68-style connection (RESET level high) and 80 for 80-style connection
|
|
# (RESET level low). [legal: 68, 80; default: 80]
|
|
InterfaceType=80
|
|
|
|
# On fast machines it may be necessary to slow down transfer to the display.
|
|
# If this value is set to zero, delay is disabled. Any value greater than
|
|
# zero slows down each write by one microsecond. [legal: 0-1000; default: 1]
|
|
DelayMult=0
|
|
|
|
# The original wiring used an inverter to drive the control lines. If you do
|
|
# not use an inverter set haveInverter to no. [default: yes; legal: yes, no]
|
|
HaveInverter=no
|
|
|
|
# On some displays column data in memory is mapped to segment lines from right
|
|
# to left. This is called inverted mapping (not to be confused with
|
|
# 'haveInverter' from above). [default: no; legal: yes, no]
|
|
#InvertedMapping=yes
|
|
|
|
# At least one display is reported (Everbouquet MG1203D) that requires sending
|
|
# three times 0xFF before a reset during initialization.
|
|
# [default: no; legal: yes, no]
|
|
#UseHardReset=yes
|
|
|
|
|
|
## serial POS display driver ##
|
|
[serialPOS]
|
|
|
|
# Device to use in serial mode [default: /dev/lcd]
|
|
Device=/dev/lcd
|
|
|
|
# Specifies the size of the display in characters. [default: 16x2]
|
|
Size=16x2
|
|
|
|
# Set the communication protocol to use with the POS display.
|
|
# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate]
|
|
Type=AEDEX
|
|
|
|
# communication baud rate with the display [default: 9600; legal: 1200, 2400,
|
|
# 19200, 115200]
|
|
Speed=9600
|
|
|
|
|
|
|
|
## Serial VFD driver ##
|
|
## Drives various (see below) serial 5x7dot VFD's. ##
|
|
[serialVFD]
|
|
|
|
# Specifies the displaytype.[default: 0]
|
|
# 0 NEC (FIPC8367 based) VFDs.
|
|
# 1 KD Rev 2.1.
|
|
# 2 Noritake VFDs (*).
|
|
# 3 Futaba VFDs
|
|
# 4 IEE S03601-95B
|
|
# 5 IEE S03601-96-080 (*)
|
|
# 6 Futaba NA202SD08FA (allmost IEE compatible)
|
|
# 7 Samsung 20S207DA4 and 20S207DA6
|
|
# 8 Nixdorf BA6x / VT100
|
|
# (* most should work, not tested yet.)
|
|
Type=0
|
|
|
|
# "no" if display connected serial, "yes" if connected parallel. [default: no]
|
|
# I.e. serial by default
|
|
use_parallel=no
|
|
|
|
# Number of Custom-Characters. default is display type dependent
|
|
#Custom-Characters=0
|
|
|
|
# Portaddress where the LPT is. Used in parallel mode only. Usual values are
|
|
# 0x278, 0x378 and 0x3BC.
|
|
Port=0x378
|
|
|
|
# Set parallel port timing delay (us). Used in parallel mode only.
|
|
# [default: 2; legal: 0 - 255]
|
|
#PortWait=2
|
|
|
|
# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
|
|
Device=/dev/ttyS1
|
|
|
|
# Specifies the size of the VFD.
|
|
Size=20x2
|
|
|
|
# Set the initial brightness [default: 1000; legal: 0 - 1000]
|
|
# (4 steps 0-250, 251-500, 501-750, 751-1000)
|
|
Brightness=1000
|
|
# Set the initial off-brightness [default: 0; legal: 0 - 1000]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
# (4 steps 0-250, 251-500, 501-750, 751-1000)
|
|
OffBrightness=0
|
|
|
|
# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
|
|
Speed=9600
|
|
|
|
# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
|
|
#ISO_8859_1=yes
|
|
|
|
|
|
|
|
## shuttleVFD driver ##
|
|
[shuttleVFD]
|
|
# No options
|
|
|
|
|
|
|
|
## stv5730 driver ##
|
|
[stv5730]
|
|
|
|
# Port the device is connected to [default: 0x378]
|
|
Port=0x378
|
|
|
|
|
|
[SureElec]
|
|
|
|
# Port the device is connected to (by default first USB serial port)
|
|
Device=/dev/ttyUSB0
|
|
|
|
# Edition level of the device (can be 1, 2 or 3) [default: 2]
|
|
#Edition=1
|
|
|
|
# set display size
|
|
# Note: The size can be obtained directly from device for edition 2 & 3.
|
|
#Size=16x2
|
|
|
|
# Set the initial contrast [default: 480; legal: 0 - 1000]
|
|
#Contrast=200
|
|
|
|
# Set the initial brightness [default: 480; legal: 1 - 1000]
|
|
#Brightness=480
|
|
|
|
# Set the initial off-brightness [default: 100; legal: 1 - 1000]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
#OffBrightness=100
|
|
|
|
|
|
## SVGAlib driver ##
|
|
[svga]
|
|
|
|
# svgalib mode to use [default: G320x240x256 ]
|
|
# legal values are supported svgalib modes
|
|
#Mode=G640x480x256
|
|
|
|
# set display size [default: 20x4]
|
|
Size=20x4
|
|
|
|
# Set the initial contrast [default: 500; legal: 0 - 1000]
|
|
# Can be set but does not change anything internally
|
|
Contrast=500
|
|
|
|
# Set the initial brightness [default: 1000; legal: 1 - 1000]
|
|
Brightness=1000
|
|
|
|
# Set the initial off-brightness [default: 500; legal: 1 - 1000]
|
|
# This value is used when the display is normally
|
|
# switched off in case LCDd is inactive
|
|
OffBrightness=500
|
|
|
|
|
|
|
|
## Text driver ##
|
|
[text]
|
|
# Set the display size [default: 20x4]
|
|
Size=20x4
|
|
|
|
|
|
|
|
## Toshiba T6963 driver ##
|
|
[t6963]
|
|
|
|
# set display size in pixels [default: 128x64]
|
|
Size=128x64
|
|
|
|
# port to use [default: 0x378; legal: 0x200 - 0x400]
|
|
Port=0x378
|
|
|
|
# Use LPT port in bi-directional mode. This should work on most LPT port and
|
|
# is required for proper timing! [default: yes; legal: yes, no]
|
|
#bidirectional=yes
|
|
|
|
# Insert additional delays into reads / writes. [default: no; legal: yes, no]
|
|
#delayBus=no
|
|
|
|
# Clear graphic memory on start-up. [default: no; legal: yes, no]
|
|
#ClearGraphic=no
|
|
|
|
|
|
|
|
## Tyan Barebones LCD driver (GS10 & GS12 series) ##
|
|
[tyan]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/lcd
|
|
|
|
# Set the communication speed [default: 9600; legal: 4800, 9600]
|
|
Speed=9600
|
|
|
|
# set display size [default: 16x2]
|
|
Size=16x2
|
|
|
|
|
|
|
|
## ELV ula200 driver ##
|
|
[ula200]
|
|
|
|
# Select the LCD size [default: 20x4]
|
|
Size=20x4
|
|
|
|
# If you have a non standard keypad you can associate any keystrings to keys.
|
|
# There are 6 input key in the CwLnx hardware that generate characters
|
|
# from 'A' to 'F'.
|
|
#
|
|
# The following it the built-in default mapping hardcoded in the driver.
|
|
# You can leave those unchanged if you have a standard keypad.
|
|
# You can change it if you want to report other keystrings or have a non
|
|
# standard keypad.
|
|
# KeyMap_A=Up
|
|
# KeyMap_B=Down
|
|
# KeyMap_C=Left
|
|
# KeyMap_D=Right
|
|
# KeyMap_E=Enter
|
|
# KeyMap_F=Escape
|
|
|
|
|
|
|
|
## Wirz SLI LCD driver ##
|
|
[sli]
|
|
|
|
# Select the output device to use [default: /dev/lcd]
|
|
Device=/dev/lcd
|
|
|
|
# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200,
|
|
# 38400, 57600, 115200]
|
|
Speed=19200
|
|
|
|
|
|
|
|
## vlsys_m428 for VFD/IR combination in Moneual MonCaso 320 ##
|
|
[vlsys_m428]
|
|
|
|
# Select the output device to use [default: /dev/ttyUSB0]
|
|
#Device=/dev/ttyUSB0
|
|
|
|
|
|
|
|
## OnScreen Display using libxosd ##
|
|
[xosd]
|
|
|
|
# set display size [default: 20x4]
|
|
Size=20x4
|
|
|
|
# Offset in pixels from the top-left corner of the monitor [default: 0x0]
|
|
Offset=200x200
|
|
|
|
# X font to use, in XLFD format, as given by "xfontsel"
|
|
Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
|
|
|
|
## Y.A.R.D.2 LCD section
|
|
[yard2LCD]
|
|
Size=20x4
|
|
# If rendering rate is too high, change in server\main.h #define RENDER_FREQ 8 to "1"
|
|
|
|
# EOF
|