This section talks about using LCDproc with LCD displays that use the CFontzPacket chipset. Model = 631 633 635 Select the LCD model [default: 633; legal: 631, 633, 635] Device = DEVICE Select the output device to use [default: /dev/lcd] May be a serial device or a USB device in serial emulation mode. Size = WIDTH x HEIGHT Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] Contrast = CONTRAST Set the initial contrast. Legal values for CONTRAST are 0 - 1000. If not specified, it defaults to 560. Brightness = BRIGHTNESS Set the initial brightness [default: 1000; legal: 0 - 1000] OffBrightness = BRIGHTNESS Set the initial off-brightness [default: 0; legal: 0 - 1000] This value is used when the display is normally switched off in case LCDd is inactive Speed = 1200 2400 9600 19200 115200 Set the the baud rate for communication with the LCD. If not specified, the default depends on the model: it is 9600 for the CFA633 and 115200 for the CFA631 and CFA635. NewFirmware = yes no Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] Currently this flag is not in use, there is no such thing as NewFirmware. ;=) Reboot = yes no Reinitialize the LCD's BIOS [default: no; legal: yes, no] I want to reboot the LCD to make sure we start from a known state