This section talks about using LCDproc with LCD displays that use the CFontz633 chipset. This driver is deprecated. Please use the CFontzPacket driver with Model=633 instead. This driver will be removed in a future version. Device = DEVICE Select the output device to use [default: /dev/lcd] may be serial device or USB device in serial emulation mode. Size = ¶meters.size; Select the LCD type (size) [default: 16x2] Contrast = CONTRAST Set the initial contrast. Legal values for CONTRAST are 0 - 1000. If not specified, it defaults to 560. Brightness = BRIGHTNESS Set the initial brightness [default: 1000; legal: 0 - 1000] OffBrightness = BRIGHTNESS Set the initial off-brightness [default: 0; legal: 0 - 1000] This value is used when the display is normally switched off in case LCDd is inactive Speed = { 1200 | 2400 | 9600 | 19200 | 115200 } Set the the baud rate for communication with the LCD. If not specified, the default is 19200. NewFirmware = ¶meters.yesnodef; Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] Currently this flag is not in use, there is no such thing as NewFirmware. ;=) Reboot = ¶meters.yesnodef; Reinitialize the LCD's BIOS [default: no; legal: yes, no] I want to reboot the LCD to make sure we start from a known state