This section talks about using LCDproc with LCD displays that use the CwLnx chipset. Device= DEVICE Select the output device to use [default: /dev/lcd] May be serial device or USB device in serial emulation mode. Size= WIDTH x HEIGHT Select the LCD size [default: 20x4] Speed= 9600 19200 Set the the baud rate for communication with the LCD. If not given, the default is 19200. Reboot= yes no Reinitialize the LCD's BIOS [default: no; legal: yes, no] normally you shouldn't need this Keypad= yes no Tells if you have a keypad connected. Keypad layout is currently not configureable from the config file. KeyMap_A= KEY KeyMap_B= KEY KeyMap_C= KEY KeyMap_D= KEY KeyMap_E= KEY KeyMap_F= KEY If you have a non standard keypad you can associate any keystrings to keys. There are 6 input key in the CwLnx hardware that generate characters from 'A' to 'F'. Legal values for KEY are Up, Down, Left, Right, Enter and Escape. The following it the built-in default mapping hardcoded in the driver. KeyMap_A Up KeyMap_B Down KeyMap_C Left KeyMap_D Right KeyMap_E Enter KeyMap_F Escape You may leave it unchanged if you have a standard keypad. You can change it if you want to report other keystrings or have a non standard keypad. keypad_test_mode= yes no keypad_test_mode permit to test keypad assignement Default value is no