This section talks about using LCDproc with text mode VFD displays from Noritake Itron. Device= DEVICE Port where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 Default: /dev/lcd Size= WIDTH x HEIGHT Specifies the size of the LCD. Default: 20x4 Brightness= BRIGHTNESS Set the initial brightness [default: 1000; legal: 0 - 1000] OffBrightness= BRIGHTNESS Set the initial off-brightness [default: 0; legal: 0 - 1000] This value is used when the display is normally switched off in case LCDd is inactive Speed= 1200 2400 9600 19200 115200 Set the the baud rate to use when communicating with the VFD. If not specified, it defaults to 9600. Parity= 0 1 2 Set the parity for communication with the device to even parity (2), odd parity (1) or no parity (0). If not given, it defaults to 0. Reboot= yes no Reinitialize the VFD [default: no; legal: yes, no]