This section talks about using LCDproc with LCD displays that use the svga library. Mode = SCGALIB-MODE svgalib mode to use [default: G320x240x256] SCGALIB-MODE can be any legal mode string for svgalib. See the svgalib 7 manual page for legal mode strings. Size = ¶meters.size; set display size [default: 20x4] Contrast = CONTRAST Set the initial contrast. Legal values for CONTRAST are 0 - 1000. If not given, the default value is 500. This parameter can be set but it does not change anything in the driver. Brightness = BRIGHTNESS Set the initial brightness [default: 1000; legal: 1 - 1000] OffBrightness = BRIGHTNESS Set the initial off-brightness [default: 500; legal: 1 - 1000] This value is used when the display is normally switched off in case LCDd is inactive