Big cleanup: Remove trailing whitespace from files (except those imported

from external sources).
2010-10-30 18:04:21 +00:00
parent 49cd060374
commit fd9b2ce713
113 changed files with 856 additions and 856 deletions
@@ -10,7 +10,7 @@
  protocol with the host. The actual connection to host is done through
  USB through a serial-to-USB converter (CP2102 USB to UART Bridge)
  integrated on the board.
-</para> 
+</para>

 <sect2 id="SureElec-config">
 <title>Configuration in LCDd.conf</title>
@@ -21,7 +21,7 @@ operating power using the standard floppy drive power connector.
 </para>

 <para>
-For more information see the 
+For more information see the
 <ulink url="http://www.emacinc.com/bay_rad.htm">BayRAD home page</ulink>
 </para>

@@ -11,21 +11,21 @@ VFD display on the AOpen XC Cube-AV EA65 media barebone.

 <para>
  The AOpen XC Cube-AV is a barebone designed for using as a media center.
-  It comes with a front panel display which is capable of displaying one line 
-  of 9 characters. 
+  It comes with a front panel display which is capable of displaying one line
+  of 9 characters.
 </para>
 <para>
  The display is internally connected to the serial port
  (<filename>/dev/ttyS1</filename>) with a fixed rate of 9600 baud.
 </para>
 <para>
-  The display uses 13 segments per character. That's why the driver provides 
+  The display uses 13 segments per character. That's why the driver provides
  no custom characters like the ones for dot matrix displays do.
 </para>
 <para>
-  The front panel furthermore has 9 keys which are illuminated by blue LEDs. 
-  The LEDs can be controlled with the backlight functions. The keys are not 
-  supported by this driver. The red LED (RECORD) can be controlled with the 
+  The front panel furthermore has 9 keys which are illuminated by blue LEDs.
+  The LEDs can be controlled with the backlight functions. The keys are not
+  supported by this driver. The red LED (RECORD) can be controlled with the
  <code>output</code> command of <application>LCDd</application>.
 </para>

@@ -9,7 +9,7 @@ This section describes the Eyebox One.
 <title>Eyebox One LCD Module</title>

 <para>
-  Eyebox One is a small rackmounted server marketed by Rightvision 
+  Eyebox One is a small rackmounted server marketed by Rightvision
  (<ulink url="http://www.alcateleyebox.rightvision.com/"></ulink>).
  This server has an LCD module, a keypad, two graphbars and some leds.
 </para>
@@ -18,20 +18,20 @@ This section describes the Eyebox One.
  connector.
 </para>
 <para>
-  I couldn't find any documentation about it. 
+  I couldn't find any documentation about it.
  All I know has been obtained with some reverse engineering.
  It seems that it can run only at 19.200 baud.
-  Sending ASCII to the module will make it simply display that text at 
-  its current cursor position. 
+  Sending ASCII to the module will make it simply display that text at
+  its current cursor position.
  The module has a built-in BIOS that recognizes commands (sent by transmitting a
  single-byte "marker" signifying that a command is on the way, followed by
  the single-byte command character itself along with any parameters, if needed)
-  allowing the programmer to clear the screen, position the cursor anywhere, 
+  allowing the programmer to clear the screen, position the cursor anywhere,
  hide/show the cursor, on/off the backlight, and so on.
 </para>
 <para>
-  This module is fast. If updating less than the whole screen, the LCD can 
-  update faster than can be seen by the human eye. This, of course, 
+  This module is fast. If updating less than the whole screen, the LCD can
+  update faster than can be seen by the human eye. This, of course,
  more than meets LCDproc's needs.
 </para>

@@ -102,7 +102,7 @@ This section has been modified by Cédric TESSIER (http://www.nezetic.info)
    Switch on the backlight? [default: <literal>yes</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
    </para>
    <note><para>
-      If you choose yes, you can switch on/off the backlight in real time 
+      If you choose yes, you can switch on/off the backlight in real time
      using the LCDproc server menu with the keypad.
    </para></note>
  </listitem>
@@ -2,7 +2,7 @@
 <title>The G15 Driver</title>

 <para>
-This section talks about using LCDproc with LCD displays on Logitech G15 
+This section talks about using LCDproc with LCD displays on Logitech G15
 gaming keyboards.
 </para>

@@ -10,10 +10,10 @@ gaming keyboards.
 <title>Features</title>

 <para>
-This driver uses g15daemon's virtual screen capabilities to enable 
+This driver uses g15daemon's virtual screen capabilities to enable
 multiple LCDd instances to display on the LCD of the Logitech G15
 gaming keyboard.  Text and other rendering services are provided by
-libg15render from the g15tools project.  Input is provided by g15daemon, 
+libg15render from the g15tools project.  Input is provided by g15daemon,
 enabling use of the L1-L5 and G1 keys.  The required libraries are
 available from the g15daemon and g15tools projects at sourceforge.net.
 </para>
@@ -2,7 +2,7 @@
 <title>The MX5000 Driver</title>

 <para>
-This section talks about using LCDproc with LCD displays on Logitech MX5000 
+This section talks about using LCDproc with LCD displays on Logitech MX5000
 keyboards.
 </para>

@@ -18,7 +18,7 @@ The displays are driven in text mode using their built-in character generator.
 Connections below are for the G242C, G121C and G321D displays.
 Always consult documentation about the specific display before asuming
 the connections given here are also correct for your display !
-</para> 
+</para>

 <table id="sed1330-connections.classic-by-lcd">
 <title>ConnectionType <literal>classic</literal> ordered by LCD pins</title>
@@ -634,7 +634,7 @@ use the following circuit.

    <note><para>
      Currently the G321D and SP14Q002 are the only ones that this driver is tested with.
-    </para></note>  
+    </para></note>
  </listitem>
 </varlistentry>
 </variablelist>
@@ -642,7 +642,7 @@ use the following circuit.
 <para>
 Contrary to other drivers the character size of an LCD using the sed1330
 driver is not given directly.
-Instead it is determined by the pixel size of the display, which is derived from 
+Instead it is determined by the pixel size of the display, which is derived from
 the display type setting and the character cell size.
 </para>