style update to User Guide

LCDd.conf

@@ -218,7 +218,7 @@ Reboot=yes
 # color settings
 # foreground color [default: blue]
 Foreground=blue
-# background color when "backlight" is ff [default: cyan]
+# background color when "backlight" is off [default: cyan]
 Background=cyan
 # background color when "backlight" is on [default: red]
 Backlight=red

docs/lcdproc-user/drivers/CFontz.docbook

@@ -111,7 +111,7 @@ CFontz chipset.
     </arg>
   </term>
   <listitem><para>
-    Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+    Set the firmware version (<emphasis>New</emphasis> means >= 2.0) [default: <literal>no</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -126,7 +126,7 @@ CFontz chipset.
     </arg>
   </term>
   <listitem><para>
-    Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+    Reinitialize the LCD's BIOS [default: <literal>no</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
     normally you shouldn't need this
   </para></listitem>
 </varlistentry>

docs/lcdproc-user/drivers/CFontz633.docbook

@@ -36,7 +36,7 @@ CFontz633 chipset.
     </arg>
   </term>
   <listitem><para>
-    Select the LCD type (size) [default: 16x2]
+    Select the LCD type (size) [default: <literal>16x2</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -58,7 +58,7 @@ CFontz633 chipset.
     <arg choice="plain"><replaceable>BRIGHTNESS</replaceable></arg>
   </term>
   <listitem><para>
-    Set the initial brightness [default: 1000; legal: 0 - 1000]
+    Set the initial brightness [default: <literal>1000</literal>; legal: <literal>0</literal> - <literal>1000</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -68,7 +68,7 @@ CFontz633 chipset.
     <arg choice="plain"><replaceable>BRIGHTNESS</replaceable></arg>
   </term>
   <listitem><para>
-    Set the initial off-brightness [default: 0; legal: 0 - 1000]
+    Set the initial off-brightness [default: <literal>0</literal>; legal: <literal>0</literal> - <literal>1000</literal>]
     This value is used when the display is normally
     switched off in case LCDd is inactive
   </para></listitem>
@@ -104,7 +104,7 @@ CFontz633 chipset.
     </arg>
   </term>
   <listitem><para>
-    Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+    Set the firmware version (<emphasis>New</emphasis> means >= 2.0) [default: <literal>no</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
     Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
   </para></listitem>
 </varlistentry>
@@ -120,7 +120,7 @@ CFontz633 chipset.
     </arg>
   </term>
   <listitem><para>
-    Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+    Reinitialize the LCD's BIOS [default: <literal>no</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
     I want to reboot the LCD to make sure we start from a known state
   </para></listitem>
 </varlistentry>

docs/lcdproc-user/drivers/CFontzPacket.docbook

@@ -26,7 +26,9 @@ CFontzPacket chipset.
     </arg>
   </term>
   <listitem><para>
-    Select the LCD model [default: 633; legal: 631, 633, 635]
+    Select the LCD model [default: <literal>633</literal>; legal: <literal>631</literal>,
+                                                                  <literal>633</literal>,
+								  <literal>635</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -75,7 +77,7 @@ CFontzPacket chipset.
     <arg choice="plain"><replaceable>BRIGHTNESS</replaceable></arg>
   </term>
   <listitem><para>
-    Set the initial brightness [default: 1000; legal: 0 - 1000]
+    Set the initial brightness [default: <literal>1000</literal>; legal: <literal>0</literal> - <literal>1000</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -85,7 +87,7 @@ CFontzPacket chipset.
     <arg choice="plain"><replaceable>BRIGHTNESS</replaceable></arg>
   </term>
   <listitem><para>
-    Set the initial off-brightness [default: 0; legal: 0 - 1000]
+    Set the initial off-brightness [default: <literal>0</literal>; legal: <literal>0</literal> - <literal>1000</literal>]
     This value is used when the display is normally
     switched off in case LCDd is inactive
   </para></listitem>
@@ -122,7 +124,7 @@ CFontzPacket chipset.
     </arg>
   </term>
   <listitem><para>
-    Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+    Set the firmware version (<emphasis>New</emphasis> means >= 2.0) [default: <literal>no</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
     Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
   </para></listitem>
 </varlistentry>
@@ -138,7 +140,7 @@ CFontzPacket chipset.
     </arg>
   </term>
   <listitem><para>
-    Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+    Reinitialize the LCD's BIOS [default: <literal>no</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
     I want to reboot the LCD to make sure we start from a known state
   </para></listitem>
 </varlistentry>

docs/lcdproc-user/drivers/CwLnx.docbook

@@ -63,7 +63,7 @@ For more information see the
     </arg>
   </term>
   <listitem><para>
-    Select the LCD model [default: 12232; legal: 12232, 1602]
+    Select the LCD model [default: <literal>12232</literal>; legal: <literal>12232</literal>, <literal>1602</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -120,7 +120,7 @@ For more information see the
     </arg>
   </term>
   <listitem><para>
-    Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+    Reinitialize the LCD's BIOS [default: <literal>no</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
     normally you shouldn't need this
   </para></listitem>
 </varlistentry>

docs/lcdproc-user/drivers/IOWarrior.docbook

@@ -52,7 +52,7 @@ IOWarrior chipset.
   </term>
   <listitem><para>
     Specifies if the last line is pixel addressable or it controls an
-    underline effect. [default: yes (= pixel addressable); legal: yes, no]
+    underline effect. [default: <literal>yes</literal> (= pixel addressable); legal: <literal>yes</literal>, <literal>no</literal>]
   </para></listitem>
 </varlistentry>
 </variablelist>

docs/lcdproc-user/drivers/MD8800.docbook

@@ -43,7 +43,7 @@ You may find more information about the LCD on Martin Moeller's homepage
     </arg>
   </term>
   <listitem><para>
-    display size [default: 16x2]
+    display size [default: <literal>16x2</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -53,7 +53,7 @@ You may find more information about the LCD on Martin Moeller's homepage
     <arg choice="plain"><replaceable>BRIGHTNESS</replaceable></arg>
   </term>
   <listitem><para>
-    Set the initial brightness [default: 1000; legal: 0 - 1000]
+    Set the initial brightness [default: <literal>1000</literal>; legal: <literal>0</literal> - <literal>1000</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -63,7 +63,7 @@ You may find more information about the LCD on Martin Moeller's homepage
     <arg choice="plain"><replaceable>BRIGHTNESS</replaceable></arg>
   </term>
   <listitem><para>
-    Set the initial off-brightness [default: 0; legal: 0 - 1000]
+    Set the initial off-brightness [default: <literal>0</literal>; legal: <literal>0</literal> - <literal>1000</literal>]
     This value is used when the display is normally
     switched off in case LCDd is inactive
   </para></listitem>

docs/lcdproc-user/drivers/curses.docbook

@@ -83,7 +83,7 @@ curses chipset.
     </arg>
   </term>
   <listitem><para>
-    display size [default: 20x4]
+    display size [default: <literal>20x4</literal>]
   </para></listitem>
 </varlistentry>
 

docs/lcdproc-user/drivers/eyeboxone.docbook

@@ -86,7 +86,7 @@ This section has been modified by Cédric TESSIER (http://www.nezetic.info)
     </arg>
   </term>
   <listitem><para>
-    Set the display size [default: 20x4]
+    Set the display size [default: <literal>20x4</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -101,7 +101,7 @@ This section has been modified by Cédric TESSIER (http://www.nezetic.info)
     </arg>
   </term>
   <listitem><para>
-    Switch on the backlight? [default: yes]
+    Switch on the backlight? [default: <literal>yes</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
     </para>
     <note><para>
       If you choose yes, you can switch on/off the backlight in real time 
@@ -121,7 +121,7 @@ This section has been modified by Cédric TESSIER (http://www.nezetic.info)
     </arg>
   </term>
   <listitem><para>
-     Switch on the cursor? [default: no]
+     Switch on the cursor? [default: <literal>no</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
     </para>
   </listitem>
 </varlistentry>

docs/lcdproc-user/drivers/hd44780.docbook

@@ -1816,7 +1816,7 @@ can be done by specifying "--enable-drivers=all" or by
   </term>
   <listitem><para>
     Specifies if the last line is pixel addressable or it controls an
-    underline effect. [default: yes (= pixel addressable); legal: yes, no]
+    underline effect. [default: <literal>yes</literal> (= pixel addressable); legal: <literal>yes</literal>, <literal>no</literal>]
   </para></listitem>
 </varlistentry>
 

docs/lcdproc-user/drivers/imon.docbook

@@ -50,7 +50,7 @@ For further details, please consult the page and the forum at
     </arg>
   </term>
   <listitem><para>
-    set display size [default: 20x4]
+    set display size [default: <literal>20x4</literal>]
   </para></listitem>
 </varlistentry>
 

docs/lcdproc-user/drivers/irman.docbook

@@ -72,7 +72,6 @@ lirc supports Irman as well.
   </term>
   <listitem><para>
     Select the input device to use, e.g. <filename>/dev/irman</filename>.
-    default: none
   </para></listitem>
 </varlistentry>
 

docs/lcdproc-user/drivers/lb216.docbook

@@ -52,7 +52,7 @@ made in australia :-)
     <arg choice="plain"><replaceable>BRIGHTNESS</replaceable></arg>
   </term>
   <listitem><para>
-    Set the initial brightness [default: 255; legal: 0 - 255]
+    Set the initial brightness [default: <literal>255</literal>; legal: <literal>0</literal> - <literal>255</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -83,7 +83,7 @@ made in australia :-)
     </arg>
   </term>
   <listitem><para>
-    Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+    Reinitialize the LCD's BIOS [default: <literal>no</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
   </para></listitem>
 </varlistentry>
 </variablelist>

docs/lcdproc-user/drivers/ms6931.docbook

@@ -34,7 +34,7 @@ ms6931 chipset.
     </arg>
   </term>
   <listitem><para>
-    display size [default: 16x2]
+    display size [default: <literal>16x2</literal>]
   </para></listitem>
 </varlistentry>
 </variablelist>

docs/lcdproc-user/drivers/mtc_s16209x.docbook

@@ -30,7 +30,7 @@ mtc_s16209x chipset.
     <arg choice="plain"><replaceable>BRIGHTNESS</replaceable></arg>
   </term>
   <listitem><para>
-    Set the initial brightness [default: 255; legal: 0 - 255]
+    Set the initial brightness [default: <literal>255</literal>; legal: <literal>0</literal> - <literal>255</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -45,7 +45,7 @@ mtc_s16209x chipset.
     </arg>
   </term>
   <listitem><para>
-    Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+    Reinitialize the LCD's BIOS [default: <literal>no</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
   </para></listitem>
 </varlistentry>
 </variablelist>

docs/lcdproc-user/drivers/mtxorb.docbook

@@ -249,7 +249,7 @@ Slightly modified in order to include it in this document March 2002, Rene Wagne
     </arg>
   </term>
   <listitem><para>
-    Set the display size [default: 20x4]
+    Set the display size [default: <literal>20x4</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -264,7 +264,7 @@ Slightly modified in order to include it in this document March 2002, Rene Wagne
     </arg>
   </term>
   <listitem><para>
-    Switch on the backlight? [default: yes]
+    Switch on the backlight? [default: <literal>yes</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
     </para>
     <note><para>
       The driver will ignore this setting if the display
@@ -321,7 +321,10 @@ Slightly modified in order to include it in this document March 2002, Rene Wagne
     </arg>
   </term>
   <listitem><para>
-    Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
+    Set the display type [default: <literal>lcd</literal>; legal: <literal>lcd</literal>,
+								  <literal>lkd</literal>,
+								  <literal>vfd</literal>,
+								  <literal>vkd</literal>]
   </para></listitem>
 </varlistentry>
 

docs/lcdproc-user/drivers/serialVFD.docbook

@@ -420,7 +420,7 @@ Number of Custom-Characters [default: Display-<command>Type</command> dependent]
   </term>
   <listitem>
     <para>
-    Specifies the display type.[default: 0]
+    Specifies the display type.[default: <literal>0</literal>]
     The following type codes are available:
     </para>
     <informaltable>
@@ -463,7 +463,7 @@ Number of Custom-Characters [default: Display-<command>Type</command> dependent]
     <arg choice="plain"><replaceable>BRIGHTNESS</replaceable></arg>
   </term>
   <listitem><para>
-Set the initial brightness [default: 1000; legal: 0 - 1000]
+Set the initial brightness [default: <literal>1000</literal>; legal: <literal>0</literal> - <literal>1000</literal>]
  (4 steps 0-250, 251-500, 501-750, 751-1000)
   </para></listitem>
 </varlistentry>
@@ -474,7 +474,7 @@ Set the initial brightness [default: 1000; legal: 0 - 1000]
     <arg choice="plain"><replaceable>OFFBRIGHTNESS</replaceable></arg>
   </term>
   <listitem><para>
-Set the initial off-brightness [default: 0; legal: 0 - 1000].
+Set the initial off-brightness [default: <literal>0</literal>; legal: <literal>0</literal> - <literal>1000</literal>].
  This value is used when the display is normally
  switched off in case LCDd is inactive.
  (4 steps 0-250, 251-500, 501-750, 751-1000)

docs/lcdproc-user/drivers/svga.docbook

@@ -20,7 +20,7 @@ svga chipset.
     <arg choice="plain"><replaceable>SCGALIB-MODE</replaceable></arg>
   </term>
   <listitem><para>
-    svgalib mode to use [default: G320x240x256]
+    svgalib mode to use [default: <literal>G320x240x256</literal>]
     <replaceable>SCGALIB-MODE</replaceable> can be any legal mode string for svgalib.
     See the <citerefentry><refentrytitle>cwsvgalib</refentrytitle>
     <manvolnum>7</manvolnum></citerefentry> manual page for legal mode strings.
@@ -37,7 +37,7 @@ svga chipset.
     </arg>
   </term>
   <listitem><para>
-    set display size [default: 20x4]
+    set display size [default: <literal>20x4</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -63,7 +63,7 @@ svga chipset.
     <arg choice="plain"><replaceable>BRIGHTNESS</replaceable></arg>
   </term>
   <listitem><para>
-    Set the initial brightness [default: 1000; legal: 1 - 1000]
+    Set the initial brightness [default: <literal>1000</literal>; legal: <literal>1</literal> - <literal>1000</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -73,7 +73,7 @@ svga chipset.
     <arg choice="plain"><replaceable>BRIGHTNESS</replaceable></arg>
   </term>
   <listitem><para>
-    Set the initial off-brightness [default: 500; legal: 1 - 1000]
+    Set the initial off-brightness [default: <literal>500</literal>; legal: <literal>1</literal> - <literal>1000</literal>]
     This value is used when the display is normally
     switched off in case LCDd is inactive
   </para></listitem>

docs/lcdproc-user/drivers/t6963.docbook

@@ -83,7 +83,7 @@ can be done by specifying "--enable-drivers=all" or by
     </arg>
   </term>
   <listitem><para>
-    set display size [default: 20x6]
+    set display size [default: <literal>20x6</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -112,7 +112,7 @@ can be done by specifying "--enable-drivers=all" or by
     </arg>
   </term>
   <listitem><para>
-    Is ECP mode on? [default: yes; legal: yes, no]
+    Is ECP mode on? [default: <literal>yes</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
   </para></listitem>
 </varlistentry>
 
@@ -127,7 +127,7 @@ can be done by specifying "--enable-drivers=all" or by
     </arg>
   </term>
   <listitem><para>
-    Use graphic? [default: no; legal: yes, no]
+    Use graphic? [default: <literal>no</literal>; legal: <literal>yes</literal>, <literal>no</literal>]
   </para></listitem>
 </varlistentry>
 </variablelist>

docs/lcdproc-user/drivers/text.docbook

@@ -24,7 +24,7 @@ text chipset.
     </arg>
   </term>
   <listitem><para>
-    Set the display size [default: 20x4]
+    Set the display size [default: <literal>20x4</literal>]
   </para></listitem>
 </varlistentry>
 </variablelist>

docs/lcdproc-user/drivers/tyan.docbook

@@ -73,7 +73,7 @@ of the LCD display by its manufacturer.
     </arg>
   </term>
   <listitem><para>
-    set display size [default: 16x2]
+    set display size [default: <literal>16x2</literal>]
   </para></listitem>
 </varlistentry>
 </variablelist>

docs/lcdproc-user/drivers/ula200.docbook

@@ -24,7 +24,7 @@ ula200 chipset.
     </arg>
   </term>
   <listitem><para>
-    Select the LCD size [default: 20x4]
+    Select the LCD size [default: <literal>20x4</literal>]
   </para></listitem>
 </varlistentry>
 

docs/lcdproc-user/drivers/xosd.docbook

@@ -24,7 +24,7 @@ xosd chipset.
     </arg>
   </term>
   <listitem><para>
-    set display size [default: 20x4]
+    set display size [default: <literal>20x4</literal>]
   </para></listitem>
 </varlistentry>