doc updates

docs/lcdproc-user/drivers/hd44780.docbook

@@ -1237,7 +1237,7 @@ that. The BL output below should be connected to the BL input in the
 <title>LIS2 USB device "lis2"</title>
 
 <para>
-LIS2 from VLSystem (http://www.vlsys.co.kr) is a full featured usb vfd module
+LIS2 from VLSystem (<ulink url="http://www.vlsys.co.kr"></ulink>) is a full featured usb vfd module
 with four channel fan controls. This device can be access as a serial device with
 help of the kernel modules ftdi_sio which map the USB port to a serial port (/dev/ttyUSBx).
 </para>
@@ -1688,7 +1688,7 @@ can be done by specifying "--enable-drivers=all" or by
         </row>
         <row>
           <entry><literal>los-panel</literal></entry>
-          <entry>LCD on Serial panel device "los-panel" (http://www.xs4all.nl/~mlf/los/)</entry>
+          <entry>LCD on Serial panel device "los-panel" (<ulink url="http://www.xs4all.nl/~mlf/los/"></ulink>)</entry>
         </row>
         <row>
           <entry><literal>vdr-lcd</literal></entry>
@@ -1696,11 +1696,11 @@ can be done by specifying "--enable-drivers=all" or by
         </row>
         <row>
           <entry><literal>lis2</literal></entry>
-          <entry>LIS2 from VLSystem (http://www.vlsys.co.kr)</entry>
+          <entry>LIS2 from VLSystem (<ulink url="http://www.vlsys.co.kr"></ulink>)</entry>
         </row>
         <row>
           <entry><literal>bwctusb</literal></entry>
-          <entry>BWCT USB device "bwctusb"</entry>
+          <entry>BWCT USB device "bwctusb" (<ulink url="http://www.bwct.de/lcd.html"></ulink>)</entry>
         </row>
         <row>
           <entry><literal>i2c</literal></entry>

docs/lcdproc-user/drivers/imon.docbook

@@ -14,9 +14,9 @@ Driver for Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON IR/VFD Module
 <para>
 In order to be able to use it, you have to get and install one of
 the following kernel modules:
- - standalone iMON VFD driver from http://venky.ws/projects/imon/
+ - standalone iMON VFD driver from <ulink url="http://venky.ws/projects/imon/"></ulink>
  - the iMON module included with LIRC ver. 0.7.1 or newer
-   from http://www.lirc.org/
+   from the <ulink url="http://www.lirc.org">LIRC project</ulink>/
 </para>
 
 <para>

docs/lcdproc-user/drivers/lircin.docbook

@@ -8,8 +8,8 @@ that works with LIRC to control the LCDproc server
 and/or clients that can handle input.
 </para>
 <para>
-Of course you need a working LIRC setup. Refer to
+Of course you need a working LIRC setup. Refer to the
-<ulink url="http://www.lirc.org">http://www.lirc.org</ulink> for more
+<ulink url="http://www.lirc.org">LIRC project</ulink> for more
 information on LIRC itself.
 </para>
 

docs/lcdproc-user/drivers/serialVFD.docbook

@@ -71,7 +71,7 @@ The driver should operate most of NEC, Futaba and Noritake 7x5 dot VFDs with
       <entry>Ok</entry>
       <entry>Yes</entry>
       <entry>(* perhaps no compatible baudrate, not tested)
- The display has no user-characters set  <command>Custom-Characters=0</command>
+ The display has no user-characters: set <command>Custom-Characters=0</command>
  in <filename>LCDd.conf.</filename></entry>
     </row>
     <row>
@@ -88,7 +88,7 @@ The driver should operate most of NEC, Futaba and Noritake 7x5 dot VFDs with
       <entry>Ok</entry>
       <entry>Ok</entry>
       <entry>Yes</entry>
-      <entry>The display is FUTABA compatible (hard and software). Set <command>Custom-Characters=0</command>
+      <entry>The display is FUTABA compatible (hard- and software). Set <command>Custom-Characters=0</command>
  in <filename>LCDd.conf.</filename> </entry>
     </row>