From 7854a826b075ebc17a3d968e6270604c684f11e8 Mon Sep 17 00:00:00 2001 From: marschap Date: Sat, 24 Nov 2007 20:08:02 +0000 Subject: [PATCH] fix typos in hd44780 documentation --- docs/lcdproc-user/drivers/hd44780.docbook | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/docs/lcdproc-user/drivers/hd44780.docbook b/docs/lcdproc-user/drivers/hd44780.docbook index a000b0a..711056e 100644 --- a/docs/lcdproc-user/drivers/hd44780.docbook +++ b/docs/lcdproc-user/drivers/hd44780.docbook @@ -2126,12 +2126,12 @@ that can be piggy-packed to a HD44780 display and connects that to USB. The board, driven by the bwctusb connection type, does neither support a keypad for input, nor more than one single-controller display, nor does it allow setting the backlight or brightness. -But it you can the display's contrast using software +But you can set the display's contrast using software (see the Constrast= configuration parameter). -If there is more than one BWCT USB modules connected to the system, +If there is more than one BWCT USB module connected to the system, the SerialNumber= configuration parameters allows selecting which display is used in LCDd. @@ -2166,7 +2166,7 @@ e.g. for a graphic LCD. Two keys can be connected to the LCD2USB interface board. They can generate three key events -that can be mapped to key names using the DirectKey_1 to +that can be mapped to key names using the DirectKey_1= to DirectKey_3= commands: one for each key and one if the keys are pressed simultaneously. With this 3-key setup, menus can be used (see example below).