diff --git a/docs/lcdproc-user/drivers/eyeboxone.docbook b/docs/lcdproc-user/drivers/eyeboxone.docbook
new file mode 100644
index 0000000..5803059
--- /dev/null
+++ b/docs/lcdproc-user/drivers/eyeboxone.docbook
@@ -0,0 +1,207 @@
+
+The Eyebox One Driver (EyeboxOne)
+
+
+ This section describes the Eyebox One.
+
+
+
+ Eyebox One LCD Module
+
+ Eyebox One is a small rackmounted server marketed by Rightvision
+ (http://www.alcateleyebox.rightvision.com/).
+ This server has an LCD module, a keypad, two graphbars and some leds.
+
+
+ The LCD is a 20x4 alphanumeric modules connected via standard DB-9 cabling and
+ connectors.
+
+
+ I couldn't find any documentation about it.
+ All I know has been obtained with some reverse engineering.
+ It seems that it can run only at 19,200 baud.
+ Sending ASCII to the module will make it simply display that text at
+ its current cursor position.
+ The module has a built-in BIOS that recognizes commands (sent by transmitting a
+ single-byte "marker" signifying that a command is on the way, followed by
+ the single-byte command character itself along with any parameters, if needed)
+ allowing the programmer to clear the screen, position the cursor anywhere,
+ hide/show the cursor, on/off the backlight, and so on.
+
+
+ This module is fast. If updating less than the whole screen, the LCD can
+ update faster than can be seen by the human eye. This, of course,
+ more than meets LCDproc's needs.
+
+
+
+ Eyebox One Driver and lcdproc client
+
+ You can use the two Eyebox One graphbars, one as a free CPU meter, and one as a free RAM meter
+ with lcdproc client (see eyebox.c in lcdproc client sources).
+
+ In order to use it, you must execute ./configure with a special parameter:
+
+ CPPFLAGS=-DLCDPROC_EYEBOXONE ./configure --enable-drivers=EyeboxOne
+
+
+ This is only a BETA version modification, take it as a demo...
+
+
+
+Copyright
+
+
+This section was originally part of the mtxorb.docbook file by Rene Wagner reenoo@gmx.de
+
+
+
+This section has been modified by Cédric TESSIER (http://www.nezetic.info)
+
+
+
+
+
+Configuration in LCDd.conf
+
+
+[EyeboxOne]
+
+
+
+
+ Device=
+ DEVICE
+
+
+ Select the output device to use [default: /dev/ttyS1]
+
+
+
+
+
+ Size=
+
+ WIDTH
+ x
+ HEIGHT
+
+
+
+ Set the display size [default: 20x4]
+
+
+
+
+
+ Backlight=
+
+
+ yes
+ no
+
+
+
+
+ Switch on the backlight? [default: yes]
+
+
+ If you choose yes, you can switch on/off the backlight in real time
+ using the LCDproc server menu with the keypad.
+
+
+
+
+
+
+ Cursor=
+
+
+ yes
+ no
+
+
+
+
+ Switch on the cursor? [default: no]
+
+
+
+
+
+
+ Speed=
+
+
+ 1200
+ 2400
+ 9600
+ 19200
+
+
+
+
+ Set the the baud rate to use when communicating with the LCD.
+ If not specified, it defaults to 19200.
+
+
+ As I said, I think only 19200 is a good choice.
+
+
+
+
+
+ LeftKey=
+ D
+
+
+ RightKey=
+ C
+
+
+ UpKey=
+ A
+
+
+ DownKey=
+ B
+
+
+ EscapeKey=
+ P
+
+
+ EnterKey=
+
+
+
+ The following table translate from EyeboxOne Key to Logical Key.
+ EyeboxOne Enter Key is a \r character, so it's hardcoded in the driver.
+
+
+
+
+
+ keypad_test_mode=
+
+
+ yes
+ no
+
+
+
+
+ You can find out which key of your display sends which
+ character by setting keypad_test_mode to yes and running
+ LCDd. LCDd will output all characters it receives.
+ Afterwards you can modify the settings above and set
+ keypad_set_mode to no again.
+
+
+
+
+
+
+
+
+
diff --git a/docs/lcdproc-user/drivers/g15.docbook b/docs/lcdproc-user/drivers/g15.docbook
new file mode 100644
index 0000000..1b4a48d
--- /dev/null
+++ b/docs/lcdproc-user/drivers/g15.docbook
@@ -0,0 +1,34 @@
+
+The G15 Driver
+
+
+This section talks about using LCDproc with LCD displays on Logitech G15
+gaming keyboards.
+
+
+
+Features
+
+
+This driver uses g15daemon's virtual screen capabilities to enable
+multiple LCDd instances to display on the LCD of the Logitech G15
+gaming keyboard. Text and other rendering services are provided by
+libg15render from the g15tools project. Input is provided by g15daemon,
+enabling use of the L1-L5 and G1 keys. The required libraries are
+available from the g15daemon and g15tools projects at sourceforge.net.
+
+
+
+Configuration in LCDd.conf
+
+
+Currently there aren't really any configuration options to be set.
+The width and height are hardcoded based on the font currently used.
+In the future, now that libg15render has FreeType2 support, there may
+be options to adjust the font used and the display size.
+
+
+
+
+
+