diff --git a/LCDd.conf b/LCDd.conf
index ca68cf3..9a0de5c 100644
--- a/LCDd.conf
+++ b/LCDd.conf
@@ -10,7 +10,7 @@
 # a section called [menu]. Further each driver has a section which
 # defines how the driver acts.
 #
-# The drivers are activated by specifiying them in a driver= line in the
+# The drivers are activated by specifying them in a driver= line in the
 # server section, like:
 #
 #   Driver=curses
@@ -40,7 +40,7 @@ DriverPath=server/drivers/
 # The name of the driver is case sensitive and determines the section
 # where to look for further configuration options of the specific driver
 # as well as the name of the dynamic driver module to load at runtime.
-# The latter one can be changed by giving af File= directive in the
+# The latter one can be changed by giving a File= directive in the
 # driver specific section.
 #
 # The following drivers are supported:
@@ -64,7 +64,7 @@ Port=13666
 # Should we report to syslog instead of stderr ? [default: no; legal: yes, no]
 #ReportToSyslog=yes
 
-# User to run as.  LCDd will drop its root priviledges, if any,
+# User to run as.  LCDd will drop its root privileges, if any,
 # and run as this user instead.
 User=nobody
 
@@ -292,7 +292,7 @@ Keypad=yes
 # KeyMap_E=Enter
 # KeyMap_F=Escape
 
-# keypad_test_mode permits to test keypad assignement
+# keypad_test_mode permits one to test keypad assignment
 # Default value is no
 #keypad_test_mode=yes
 
@@ -394,7 +394,7 @@ Driver=noritake800
 UseFT2=yes
 
 # text resolution in fixed width characters [default: 16x4]
-# (if it won't fit according to available physical pixel resolutioni
+# (if it won't fit according to available physical pixel resolution
 # and the minimum available font face size in pixels, then
 # 'DebugBorder' will automatically be turned on)
 TextResolution=20x4
@@ -407,7 +407,7 @@ FontFile=/usr/share/fonts/corefonts/courbd.ttf
 # character encoding to use
 CharEncoding=iso8859-2
 
-# minumum size in pixels in which fonts should be rendered
+# minimum size in pixels in which fonts should be rendered
 MinFontFaceSize=7x12
 
 ## optional:
@@ -417,7 +417,7 @@ Backlight=no                    # Backlight if applicable
 UpsideDown=no                   # flip image upside down
 Invert=no                       # invert light/dark pixels
 ShowDebugFrame=no               # turns on/off 1 pixel thick debugging
-                                # border whithin the usable text area,
+                                # border within the usable text area,
                                 # for setting up TextResolution and
                                 # MinFontFaceSize (if using FT2);
 ShowBigBorder=no                # border around the unused area
@@ -447,7 +447,7 @@ Speed=19200
 # Select what type of connection. See documentation for types.
 ConnectionType=4bit
 
-# Port where the LPT is [ususal: 0x278, 0x378 and 0x3BC]
+# Port where the LPT is [usual: 0x278, 0x378 and 0x3BC]
 Port=0x378
 
 # Device of the serial interface [default: /dev/lcd]
@@ -549,7 +549,7 @@ Size=20x4
 # (if not given, the 1st IOWarrior found gets used)
 #SerialNumber=00000674
 
-# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
+# If you have an HD66712, a KS0073 or another 'almost HD44780-compatible',
 # set this flag to get into extended mode (4-line linear).
 #ExtendedMode=yes
 
@@ -745,9 +745,9 @@ OffBrightness=50
 # Show self-running clock after LCDd shutdown
 # Possible values: [default: no; legal: no, small, big]
 Clock=big
-# Dimm display, no dimming gives full brightness [default: no, legal: yes, no]
+# Dim display, no dimming gives full brightness [default: no, legal: yes, no]
 Dimming=no
-# Dimm display in case LCDd is inactive [default: no, legal: yes, no]
+# Dim display in case LCDd is inactive [default: no, legal: yes, no]
 OffDimming=yes
 
 
@@ -957,7 +957,7 @@ DelayMult=0
 ## serial POS display driver ##
 [serialPOS]
 
-# Device to use in serial modea [default: /dev/lcd]
+# Device to use in serial mode [default: /dev/lcd]
 Device=/dev/lcd
 
 # Specifies the size of the display in characters. [default: 16x2]
@@ -986,19 +986,19 @@ Speed=9600
 # 6 Futaba NA202SD08FA (allmost IEE compatible)
 # 7 Samsung 20S207DA4 and 20S207DA6
 # 8 Nixdorf BA6x / VT100
-# (* most should work, not testet yet.)
+# (* most should work, not tested yet.)
 Type=0
 
 # "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
 use_parallel=no
 
-# Number of Custom-Characters [default: displaytype dependent]
+# Number of Custom-Characters [default: display type dependent]
 #Custom-Characters=0
 
-# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
+# Portaddress where the LPT is. Used in parallel mode only. Usual values are 0x278, 0x378 and 0x3BC
 Port=0x378
 
-# Set parallel port timingdelay (us). Used in parallelmode only. [default: 2; legal: 0 - 255]
+# Set parallel port timing delay (us). Used in parallel mode only. [default: 2; legal: 0 - 255]
 #PortWait=2
 
 # Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1