Modify serial drivers to use cfmakeraw where applicable. Affects CFontz*,

CwLnx, EyeboxOne, MtxOrb, hd44780-lis, and serialPOS.

server/drivers/MtxOrb.c

@@ -408,9 +408,8 @@ MtxOrb_init (Driver *drvthis)
 
 	tcgetattr(p->fd, &portset);
 
-	// THIS ALL COMMENTED OUT BECAUSE WE NEED TO SET TIMEOUTS
 	/* We use RAW mode */
-#ifdef HAVE_CFMAKERAW_NOT
+#ifdef HAVE_CFMAKERAW
 	/* The easy way */
 	cfmakeraw(&portset);
 #else
@@ -421,16 +420,21 @@ MtxOrb_init (Driver *drvthis)
 	portset.c_lflag &= ~( ECHO | ECHONL | ICANON | ISIG | IEXTEN );
 	portset.c_cflag &= ~( CSIZE | PARENB | CRTSCTS );
 	portset.c_cflag |= CS8 | CREAD | CLOCAL;
+#endif
+	/* Set timeouts */
 	portset.c_cc[VMIN] = 1;
 	portset.c_cc[VTIME] = 3;
-#endif
 
 	/* Set port speed */
 	cfsetospeed(&portset, speed);
 	cfsetispeed(&portset, B0);
 
 	/* Do it... */
-	tcsetattr(p->fd, TCSANOW, &portset);
+	if (tcsetattr(p->fd, TCSANOW, &portset) == -1) {
+		report(RPT_ERR, "%s: failed to configure port (%s)", drvthis->name, strerror(errno));
+		return -1;
+	}
+ 
 
 	/* Make sure the frame buffer is there... */
 	p->framebuf = (unsigned char *) calloc(p->width * p->height, 1);