Files
lcdproc/README.lirc
T

71 lines
1.7 KiB
Plaintext
Raw Normal View History

2000-01-17 08:22:15 +00:00
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
*******************************************************
LCDd lirc driver README - Harald Klein, linux@chello.at
*******************************************************
This is the first release of lirc driver for LCDd.
To use it simply enable it with configure
eg. (Matrix Orbital Display and lirc):
$ ./configure --enable-drivers=mtxorb,lircin
This driver parses the .lircrc file. remote and mode are
also supported. You can define a LCDd key with
- --- snip .lircrc ---
begin
prog = lcdd
button = 2
config = A
end
begin
prog = lcdd
button = 4
config = B
end
begin
prog = lcdd
button = 6
config = C
end
begin
prog = lcdd
button = 8
config = D
end
- --- snip ---
Any suggestions? Feel free to write a mail...
Have fun!
PS.:
You don't have an infrared receiver?
1.) visit the Lirc homepage and get lirc. http://fsinfo.cs.uni-sb.de/~columbus/lirc/
2.) decide for device (irman, animax, home brew receiver, universal remote ...)
If you want to build the serial receiver i suggest to ask Infineon for test samples
(sfh5110-36, eg, be sure to get correct freq, i use 36 khz, fits for all my remotes)
and USE THE 7805 TO REGULATE THE VOLTAGE !! its cheap, and the circuits with transistors
mostly wont work.
3.) Install lirc
PPS.: Yes, this also works with IRMAN.
Greets to all open source developers out there!!!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.1 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE4gmBNQ8ap3H8sEzkRAqaYAJ93s0joSyPZVeeGKkVn+FqGte5XDgCaAjpA
drqseag4vCi3Omg5NND7+dw=
=DJkG
-----END PGP SIGNATURE-----