mangavalkandClaude Opus 5.5 e152246e9f Retract at print end, undo it at print start ...

Klipper's G10 retracts only once until a G11, and nothing sends G11 on
this printer: the G10 in PRINT_WARMUP used up the retract, so PRINT_END
never retracted and the nozzle leaked while cooling down.

- _NOZZLE_RETRACT retracts and remembers the amount in the saved
  variable nozzle_retract (survives restarts, capped at 15 mm).
  PRINT_END retracts 5 mm, PRINT_WARMUP 2 mm, CANCEL_PRINT 5 mm plus the
  park/PAUSE retract.
- _NOZZLE_UNRETRACT in PRINT_START pushes it back over the bucket before
  the wipe.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-11 15:01:55 +02:00

..

afc

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00

blobifier

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00

heating

Fix pause/resume chain, shared print cleanup, add CLAUDE.md

2026-10-10 15:20:28 +02:00

leds

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00

pressure_advance

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00

print

Retract at print end, undo it at print start

2026-10-11 15:01:55 +02:00

sensors

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00

spoolman

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00

klipper-macros.cfg

Include after AFC, link scripts/ into the config folder

2026-10-10 15:28:52 +02:00

save_variables.cfg

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00