- _PA_CFG.test_z (default 5): LANE_CALIBRATE_PA lowers the nozzle to this
height instead of Z0 before PA_CALIBRATE, so the test lines are extruded
in the air.
- BLOBIFIER: purge_spd_nozzle {"0.4": 150, "0.2": 75} mm/min, picked by
the pa_nozzle save variable (SET_NOZZLE); other sizes use purge_spd.
150 mm/min is about 6 mm3/s, too much for a 0.2 nozzle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>