Files
klipper-macros/macros/pressure_advance
mangavalkandClaude Opus 5.5 cd1cd7ca47 PA test: AFC buffer fault detection at 2 during PA_CALIBRATE
At the configured 8 the buffer faults after 30 mm in one state; during the
test lines it needs far more to reach its other sensor, so every lane1
calibration on 2026-11-07 paused with AFC NOT FEEDING. With detection off
the buffer switched after ~80 s and the test finished.

_PA_CFG.test_error_sensitivity (2) is set before PA_CALIBRATE and the
[AFC_buffer] config value is restored after it through
_FIRST_LAYER_FAULT_DETECTION ON=0 (lowered=True), which _PRINT_CLEANUP also
calls when the test stops with an error. Nothing changes when detection is
off in the config.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 16:44:47 +01:00
..