Files
klipper-macros/macros
mangavalkandClaude Opus 5.5 7761e8f803 BDP_TOUCH: one quick continuous press instead of small steps
Stepping down 0.005 mm at a time found no touch even 0.25 mm into the bed
(peak 16): the sensor sets a new baseline by itself while the force looks
steady, and the slow ramp looked steady. A quick press gave about 25 per
0.1 mm. BDP_TOUCH now lowers the nozzle in one drip-mode move (SPEED,
default 0.3 mm/s) while a timer reads the force every few ms and stops the
move at STOP; Z per reading comes from stepper_z's past position, the halt
position is recovered like homing.py does. The threshold needs 3 readings
in a row, and the curve is logged also when no touch was found.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 17:24:12 +01:00
..