mangavalkandClaude Opus 5.5 2100857846 Chamber prints: unload a lane that is not the first tool before the soak ...

With the chamber heated, a filament left in the toolhead path softens in
the PTFE tube (PLA loaded, ASA print). After the first HOME, PRINT_WARMUP
unloads the loaded lane when it is not mapped to the print's first tool
(PRINT_START would swap it anyway). A failed unload stops the print
before the chamber heats.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-17 19:56:30 +02:00

..

filament.cfg

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00

homing.cfg

Group macros by topic, add Blobifier, fix first tool change

2026-10-10 14:24:37 +02:00

idle_timeout.cfg

LEDs: nozzle light follows the motion sensor, new logo status macro

2026-10-17 19:32:42 +02:00

pause_resume.cfg

LEDs: nozzle light follows the motion sensor, new logo status macro

2026-10-17 19:32:42 +02:00

print_start_end.cfg

Chamber prints: unload a lane that is not the first tool before the soak

2026-10-17 19:56:30 +02:00