mangavalkandClaude Opus 5.5 d49e65c0bb Flexible lanes load slower; purge at the previous filament's temperature ...

- flex_lanes.cfg: a 5 s poller sets SET_LONG_MOVE_SPEED to 50 mm/s (AFC's
  minimum) for lanes whose material is TPU/TPE/flex and back to the
  configured long_moves_speed otherwise; reapplied after a restart.
- BLOBIFIER_CHECKED: remembers the temperature of the filament in the
  nozzle (saved nozzle_last_temp). When it is more than flush_margin
  (10C) above the new filament's, the purge runs at that temperature and
  the nozzle cools back afterwards, so the leftover melts out (seen: ASA
  leftover with TPU loaded at 210C).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-19 15:59:27 +02:00

..

flex_lanes.cfg

Flexible lanes load slower; purge at the previous filament's temperature

2026-10-19 15:59:27 +02:00

lane_tools.cfg

RESUME: check the AFC lane, add AFC_CLEAR_ALL_MESSAGES

2026-10-15 22:12:53 +02:00

purge_check.cfg

Flexible lanes load slower; purge at the previous filament's temperature

2026-10-19 15:59:27 +02:00

purge_until_empty.cfg

Show errors and warnings on the display (_ERROR, _WARN)

2026-10-16 17:41:41 +02:00

xy_safety_check.cfg

Show errors and warnings on the display (_ERROR, _WARN)

2026-10-16 17:41:41 +02:00