# Idle timeout: heaters and motors off when the printer is idle

# [dynamicmacros]
# configs: Macros/dynamicmacros.cfg

# [gcode_button kill_switch] 
# pin: gpio7
# press_gcode: M112

[idle_timeout]
gcode:
  TURN_OFF_HEATERS
  iHEATER_OFF   ; Turns off the chamber heater
  M84
  # reset paused flag
  {% if printer.pause_resume.is_paused|lower == 'false' and park|lower == 'true'%}
    _TOOLHEAD_PARK_PAUSE_CANCEL
  {% endif %}
  _status_ready
#   A list of G-Code commands to execute on an idle timeout. See
#   docs/Command_Templates.md for G-Code format. The default is to run
#   "TURN_OFF_HEATERS" and "M84".
timeout: 85400 # 24 hours