#####################################################################
# klipper-macros: include this one file from printer.cfg, after
# [include mainsail.cfg] (it needs [pause_resume], [virtual_sdcard] and
# [respond] from there, and replaces Mainsail's PAUSE/RESUME/CANCEL_PRINT):
#
#   [include klipper-macros/klipper-macros.cfg]
#
# Comment out what you do not use. Keep the order where noted: some
# macros (PAUSE, RESUME, CANCEL_PRINT) are defined in more than one file
# and the last definition wins.
#####################################################################

[include save_variables.cfg]            # the one [save_variables] for all macros

# Blobifier purge bucket (Turtleblobifier for AFC, modified)
[include blobifier/blobifier.cfg]

# Printing
[include print/pause_resume.cfg]        # before heating/heat_soak.cfg
[include print/filament.cfg]
[include print/homing.cfg]
[include print/idle_timeout.cfg]
[include print/print_start_end.cfg]

# Heating
[include heating/bed_fans.cfg]
[include heating/chamber_iheater.cfg]
[include heating/heat_soak.cfg]          # its RESUME wraps the one above
[include heating/soak_my_bed.cfg]
[include heating/filament_drying.cfg]

# AFC (Box Turtle)
[include afc/xy_safety_check.cfg]
[include afc/lane_tools.cfg]
[include afc/purge_check.cfg]
[include afc/purge_until_empty.cfg]

# Pressure advance per lane/spool (bd_pressure + Spoolman)
[include pressure_advance/bd_pa_spoolman.cfg]

# Spoolman
[include spoolman/active_spool.cfg]

# LEDs and sensors
[include leds/stealthburner_leds.cfg]
[include sensors/motion_sensor.cfg]