[gcode_button am312]
pin: !PC0
press_gcode:
  _motion_detected
  
[gcode_macro _motion_detected]
description: Motion sensor triggered
gcode:
  {% set printing = printer.print_stats.state == "printing" %}

  # RESPOND MSG="AM312: Motion detected"

  {% if printing %}
    # RESPOND MSG="AM312: Printer is printing -> light ON (100%)"
    SET_PIN PIN=caselight VALUE=1.0
    _set_nozzle_leds_on
  {% else %}
    # RESPOND MSG="AM312: Printer idle -> light ON (10%)"
    SET_PIN PIN=caselight VALUE=0.1
    _set_nozzle_leds_off
  {% endif %}

  # RESPOND MSG="AM312: Resetting timeout to 30 seconds"
  UPDATE_DELAYED_GCODE ID=_motion_timeout DURATION=30


[delayed_gcode _motion_timeout]
gcode:
  {% set printing = printer.print_stats.state == "printing" %}

  # RESPOND MSG="AM312: Timeout reached, no motion"

  {% if printing %}
    # RESPOND MSG="AM312: Printing -> dim light to 10%"
    SET_PIN PIN=caselight VALUE=0.1
  {% else %}
    # RESPOND MSG="AM312: Idle -> light OFF"
    SET_PIN PIN=caselight VALUE=0.0
  {% endif %}
  _set_nozzle_leds_off