mangavalk/klipper-macros
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Show errors and warnings on the display (_ERROR, _WARN)

Browse Source 
action_raise_error aborts while the macro renders, so an M117 in the same
macro never ran and errors such as the RESUME lane check only reached the
console. messages.cfg adds _ERROR (M117, then raise in a separate macro)
and _WARN (RESPOND TYPE=error + M117); all errors and warnings use them.
PAUSE shows AFC's error as the pause reason; RESUME, CANCEL_PRINT and
PRINT_WARMUP clear the display.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-10-16 17:41:41 +02:00
1 parent a67e99015f
commit fbdb2d5e1d
11 files changed
+78 -29
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

macros/afc/purge_until_empty.cfg
+7 -7
View File
@@ -49,13 +49,13 @@ gcode:
{% set min_temp = printer.configfile.settings.extruder.min_extrude_temp|float %}
{% set temp = params.TEMP|default([printer.extruder.target, 0]|max)|float %}
{% if 'bdpressure_check' not in printer %}
{action_raise_error("PURGE_UNTIL_EMPTY: needs bdpressure_check.py and [bdpressure_check]")}
_ERROR MSG="PURGE_UNTIL_EMPTY: needs bdpressure_check.py and [bdpressure_check]"
{% elif printer.print_stats.state == "printing" %}
{action_raise_error("PURGE_UNTIL_EMPTY: printer is printing, pause the print first")}
_ERROR MSG="PURGE_UNTIL_EMPTY: printer is printing, pause the print first"
{% elif "xyz" not in printer.toolhead.homed_axes %}
{action_raise_error("PURGE_UNTIL_EMPTY: home the printer first")}
_ERROR MSG="PURGE_UNTIL_EMPTY: home the printer first"
{% elif temp < min_temp %}
{action_raise_error("PURGE_UNTIL_EMPTY: give the filament temperature, e.g. PURGE_UNTIL_EMPTY TEMP=240")}
_ERROR MSG="PURGE_UNTIL_EMPTY: give the filament temperature, e.g. PURGE_UNTIL_EMPTY TEMP=240" DISPLAY="PURGE_UNTIL_EMPTY: give TEMP=..."
{% else %}
BDP_CHECK_QUERY
_PURGE_UNTIL_EMPTY_RUN MAX={max_purges} LENGTH={length} UNSYNC={unsync} TEMP={temp}
@@ -65,7 +65,7 @@ gcode:
[gcode_macro _PURGE_UNTIL_EMPTY_RUN]
gcode:
{% if not printer.bdpressure_check.available %}
{action_raise_error("PURGE_UNTIL_EMPTY: bd_pressure load-check firmware not found")}
_ERROR MSG="PURGE_UNTIL_EMPTY: bd_pressure load-check firmware not found" DISPLAY="PURGE_UNTIL_EMPTY: no bd_pressure"
{% endif %}
SET_GCODE_VARIABLE MACRO=PURGE_UNTIL_EMPTY VARIABLE=done VALUE=0
SET_GCODE_VARIABLE MACRO=PURGE_UNTIL_EMPTY VARIABLE=count VALUE=0
@@ -105,7 +105,7 @@ gcode:
{% set p = printer.bdpressure_check %}
{% set n = cfg.count + 1 %}
{% if not p.available %}
{action_raise_error("PURGE_UNTIL_EMPTY: lost the bd_pressure load-check reading, stopped. bdwidth runout response may still be off: SET_FILAMENT_SENSOR SENSOR=<bdwidth name> ENABLE=1")}
_ERROR MSG="PURGE_UNTIL_EMPTY: lost the bd_pressure load-check reading, stopped. bdwidth runout response may still be off: SET_FILAMENT_SENSOR SENSOR=<bdwidth name> ENABLE=1" DISPLAY="PURGE_UNTIL_EMPTY: lost bd_pressure, stopped"
{% endif %}
{% set empty = p.longest_ms < cfg.empty_ms %}
SET_GCODE_VARIABLE MACRO=PURGE_UNTIL_EMPTY VARIABLE=count VALUE={n}
@@ -123,5 +123,5 @@ gcode:
{% if cfg.done %}
RESPOND MSG="PURGE_UNTIL_EMPTY: no more filament after {cfg.count} purge{'s' if cfg.count != 1 else ''}. The last bit between the extruder gears and the nozzle is pushed out by the next load."
{% else %}
RESPOND TYPE=error MSG="PURGE_UNTIL_EMPTY: still pressure after {params.MAX} purges. The lane may still be feeding, or the nozzle is blocked - check before running it again."
_WARN MSG="PURGE_UNTIL_EMPTY: still pressure after {params.MAX} purges. The lane may still be feeding, or the nozzle is blocked - check before running it again." DISPLAY="PURGE_UNTIL_EMPTY: still pressure, check lane and nozzle"
{% endif %}