Move bdpressure_check.py and bdp_guard.py to the bd_pressure repo
Both now live in the fork https://github.com/MangaValk/bd_pressure (klipper/, branch main, upstream PR markniu/bd_pressure#13), installed by its klipper/install.sh and its own Moonraker update_manager entry. The fork's bdpressure_check.py also reads the v2 firmware diagnostics. bdp_touch.py stays here. Docs and comments point to the bd_pressure repo. install.sh only links the files it has, so after this update it no longer overwrites the bd_pressure links. Run ~/bd_pressure/klipper/install.sh before updating, or the two links are left dangling. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
cd1cd7ca47
commit
dae8afac20
7 files changed
+19
-424
No files matched your search
@@ -1,6 +1,6 @@
|
||||
# Nozzle collision guard: bd_pressure watches the nozzle force during moves
|
||||
# that must not touch anything (needs extras/bdp_guard.py and the bd_pressure
|
||||
# load-check firmware). See extras/bdp_guard.py.
|
||||
# that must not touch anything (needs bdp_guard.py from the bd_pressure repo,
|
||||
# klipper/, and its load-check firmware). See klipper/load_check/README.md there.
|
||||
#
|
||||
# mode: stop shuts Klipper down on a touch; log only measures and reports
|
||||
# each phase (console and klippy.log, "bdp_guard:"). A phase can override it
|
||||
|
||||
Reference in new issue
Block a user