Move bdpressure_check.py and bdp_guard.py to the bd_pressure repo
Both now live in the fork https://github.com/MangaValk/bd_pressure (klipper/, branch main, upstream PR markniu/bd_pressure#13), installed by its klipper/install.sh and its own Moonraker update_manager entry. The fork's bdpressure_check.py also reads the v2 firmware diagnostics. bdp_touch.py stays here. Docs and comments point to the bd_pressure repo. install.sh only links the files it has, so after this update it no longer overwrites the bd_pressure links. Run ~/bd_pressure/klipper/install.sh before updating, or the two links are left dangling. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
cd1cd7ca47
commit
dae8afac20
7 files changed
+19
-424
No files matched your search
@@ -12,7 +12,8 @@
|
||||
#
|
||||
# Needs: bdwidth_status.py in ~/klipper/klippy/extras/
|
||||
# bdpressure_check.py in ~/klipper/klippy/extras/ (optional)
|
||||
# (klipper/install.sh links both; guide: klipper/load_check/afc_blobifier/README.md)
|
||||
# (this repo's install.sh links bdwidth_status.py; bdpressure_check.py
|
||||
# comes from the bd_pressure repo, its klipper/install.sh links it)
|
||||
# Hook: in [AFC] (AFC/AFC.cfg) change poop_cmd: BLOBIFIER
|
||||
# to poop_cmd: BLOBIFIER_CHECKED
|
||||
#
|
||||
|
||||
@@ -20,7 +20,7 @@
|
||||
# Printing
|
||||
[include print/pause_resume.cfg]
|
||||
[include print/filament.cfg]
|
||||
[include print/nozzle_guard.cfg] # bd_pressure nozzle collision guard (needs extras/bdp_guard.py)
|
||||
[include print/nozzle_guard.cfg] # bd_pressure nozzle collision guard (needs bdp_guard.py, bd_pressure repo)
|
||||
[include print/homing.cfg]
|
||||
[include print/idle_timeout.cfg]
|
||||
[include print/print_start_end.cfg]
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
# Nozzle collision guard: bd_pressure watches the nozzle force during moves
|
||||
# that must not touch anything (needs extras/bdp_guard.py and the bd_pressure
|
||||
# load-check firmware). See extras/bdp_guard.py.
|
||||
# that must not touch anything (needs bdp_guard.py from the bd_pressure repo,
|
||||
# klipper/, and its load-check firmware). See klipper/load_check/README.md there.
|
||||
#
|
||||
# mode: stop shuts Klipper down on a touch; log only measures and reports
|
||||
# each phase (console and klippy.log, "bdp_guard:"). A phase can override it
|
||||
|
||||
Reference in new issue
Block a user