Move bdpressure_check.py and bdp_guard.py to the bd_pressure repo
Both now live in the fork https://github.com/MangaValk/bd_pressure (klipper/, branch main, upstream PR markniu/bd_pressure#13), installed by its klipper/install.sh and its own Moonraker update_manager entry. The fork's bdpressure_check.py also reads the v2 firmware diagnostics. bdp_touch.py stays here. Docs and comments point to the bd_pressure repo. install.sh only links the files it has, so after this update it no longer overwrites the bd_pressure links. Run ~/bd_pressure/klipper/install.sh before updating, or the two links are left dangling. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
cd1cd7ca47
commit
dae8afac20
7 files changed
+19
-424
No files matched your search
@@ -10,8 +10,10 @@ Voron 2.4 350, Klipper + Moonraker + Mainsail on a Raspberry Pi 4
|
||||
(`http://mainsailos.local`, Moonraker API on port 80). AFC Box Turtle with
|
||||
5 lanes, Blobifier purge bucket, Beacon (Z homing and probing), Nitehawk-SB
|
||||
toolboard (USB), Leviathan mainboard as USB-CAN bridge, bd_pressure
|
||||
(load-check firmware, branch `load-check-extension` in
|
||||
`D:\Claude\bd_pressure-load-check\bd_pressure`), bdwidth (CCD width/motion sensor on USB; switched off: its motion reading
|
||||
(load-check firmware; `bdpressure.py`, `bdpressure_check.py` and `bdp_guard.py`
|
||||
come from the fork `https://github.com/MangaValk/bd_pressure`, local clone
|
||||
`D:\Claude\bd_pressure`, branch `main`, installed on the Pi in `~/bd_pressure`),
|
||||
bdwidth (CCD width/motion sensor on USB; switched off: its motion reading
|
||||
stays at 0, its width compensation made the flow jump 77-119% and a USB
|
||||
dropout once shut down Klipper. The macros work with or without
|
||||
`[bdwidth fila_width_0]`; clogs and breaks are caught by AFC's buffer fault
|
||||
@@ -85,7 +87,7 @@ detection, `filament_error_sensitivity`), iHeater chamber heater.
|
||||
not `action_raise_error` / `RESPOND TYPE=error`, so they also show on the
|
||||
display. `action_raise_error` aborts while rendering, so an `M117` in the
|
||||
same macro would never run. No double quotes in `MSG`/`DISPLAY`.
|
||||
- Nozzle guard (`print/nozzle_guard.cfg`, `extras/bdp_guard.py`): wrap only
|
||||
- Nozzle guard (`print/nozzle_guard.cfg`, `bdp_guard.py` in the bd_pressure repo): wrap only
|
||||
moves where nothing may touch the nozzle in `_GUARD_ON PHASE=x` /
|
||||
`_GUARD_OFF`. Never leave it on across contact homing, extrusion, purges,
|
||||
the Blobifier park or AFC cuts and loads: in `mode: stop` that is an
|
||||
|
||||
Reference in new issue
Block a user