_PRINT_CLEANUP: clear AFC runout lanes at the end of every print

Infinite spool (SET_RUNOUT) is set up per print; after a print end or
cancel every lane with a runout lane gets SET_RUNOUT RUNOUT=NONE. Lanes
without one are skipped, so the console stays quiet.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-07 16:54:44 +01:00
1 parent dae8afac20
commit d8392a81c7
1 file changed
+7 -1
+7 -1
View File
@@ -346,7 +346,7 @@ gcode:
# End-of-print cleanup shared by PRINT_END and CANCEL_PRINT
[gcode_macro _PRINT_CLEANUP]
description: Heaters (incl. chamber heater) and part fan off, flow back to 100%, bdwidth off, mesh and skew cleared, nozzle guard off
description: Heaters (incl. chamber heater) and part fan off, flow back to 100%, bdwidth off, mesh and skew cleared, nozzle guard off, AFC runouts cleared
gcode:
_GUARD_OFF ; a print start that failed while it was armed
_BED_CHECK_RESET ; cancelled while the bed check had it paused
@@ -364,6 +364,12 @@ gcode:
SET_GCODE_VARIABLE MACRO=_PURGE_CHECK_CFG VARIABLE=ignore_missing_sensor VALUE=False
{% endif %}
_FIRST_LAYER_FAULT_DETECTION ON=0 ; a print that ended during the first layer
# Infinite spool is set up per print (SET_RUNOUT): clear every lane's runout
{% if 'AFC' in printer %}
{% for lane in printer.AFC.lanes|default([]) if printer["AFC_stepper " ~ lane].runout_lane|default(none) %}
SET_RUNOUT LANE={lane} RUNOUT=NONE
{% endfor %}
{% endif %}
# AFC buffer fault detection (filament_error_sensitivity, 0-10, higher =
# pauses sooner) with its own value during the first layer.