PRINT_END: retract 2 mm instead of 5

The slicer already retracts on the last move; 5 mm on top was too much.
The soak retract in _LOAD_FOR_CHAMBER keeps the 5 mm default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-07 14:36:42 +01:00
1 parent 19c70ebeb8
commit cc533824e3
1 file changed
+1 -1
+1 -1
View File
@@ -325,7 +325,7 @@ gcode:
M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
_NOZZLE_RETRACT ; so the nozzle does not leak while cooling down
_NOZZLE_RETRACT LENGTH=2 ; so the nozzle does not leak while cooling down (plus the slicer's own retract)
TURN_OFF_HEATERS
iHEATER_OFF ; Turns off the chamber heater