MCU firmware: aldis as a submodule, old Klipper update script archived
aldis (https://github.com/mjonuschat/aldis, GPL-3.0) replaces scripts/update_all_mcus.sh: it discovers the MCUs from Moonraker and builds and flashes only outdated ones with the Kconfig each MCU reports. Its source is a submodule in external/aldis pinned to v0.4.0, the release installed on the Pi in ~/aldis (Moonraker does not fetch submodules, so it stays empty there). The old script moves to scripts/archive/; the Katapult script stays, aldis does not update bootloaders. scripts/README.md: install, setup, use and the checks for this printer (all MCUs report mcu_kconfig, all use Katapult). README and CLAUDE.md point to it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
d8392a81c7
commit
bcb1a53b2a
6 files changed
+81
-10
No files matched your search
@@ -73,9 +73,13 @@ here (`purge_check.cfg`, `nozzle_guard.cfg`, `bd_pa_spoolman.cfg`) still use the
|
||||
|
||||
### Scripts (`scripts/`)
|
||||
|
||||
Firmware update scripts for all MCUs (Klipper and Katapult). They contain
|
||||
this printer's CAN UUIDs and serial IDs: see [scripts/README.md](scripts/README.md)
|
||||
before using them on another printer. `twist_check.py` is the axis twist
|
||||
MCU firmware: Klipper on the MCUs is updated with
|
||||
[aldis](https://github.com/mjonuschat/aldis), included as a git submodule in
|
||||
`external/aldis` (pinned to the release in use; on the Pi run the released
|
||||
program in `~/aldis`). Install and use: [scripts/README.md](scripts/README.md).
|
||||
The old Klipper update script is in `scripts/archive/`; the Katapult script
|
||||
(`update_katapult_all_mcus.sh`, this printer's CAN UUIDs and serial IDs) is
|
||||
still used for the bootloaders. `twist_check.py` is the axis twist
|
||||
calibration behind `TWIST_CALIBRATE`: see [scripts/twist_check.md](scripts/twist_check.md).
|
||||
|
||||
### Tools (`tools/`)
|
||||
@@ -179,6 +183,7 @@ original licenses apply to those parts:
|
||||
| `pressure_advance/bd_pressure.cfg` | [bd_pressure](https://github.com/markniu/bd_pressure) `klipper/bd_pressure.cfg` |
|
||||
| `print/test_speed.cfg` | [Ellis' TEST_SPEED](https://ellis3dp.com/Print-Tuning-Guide/articles/determining_max_speeds_accels.html) |
|
||||
| `print/pause_resume.cfg`, `print/filament.cfg` | [KlipperScreen recommended macros](https://klipperscreen.readthedocs.io/en/latest/macros/#recommended) |
|
||||
| `external/aldis` | [aldis](https://github.com/mjonuschat/aldis) by mjonuschat, GPL-3.0 (git submodule, unchanged) |
|
||||
| `scripts/` | [Voron docs: automating MCU updates](https://docs.vorondesign.com/community/howto/drachenkatze/automating_klipper_mcu_updates.html), [Esoterical's CANBus guide](https://canbus.esoterical.online/) |
|
||||
|
||||
Uses: [Klipper](https://github.com/Klipper3d/klipper),
|
||||
|
||||
Reference in new issue
Block a user