mangavalk/klipper-macros
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

bdwidth: width only in PRINT_START

Browse Source 
The CCD motion reading stays at 0 (actual_total_move:0), so motion mode
only produced false "Rounout" messages. ENABLE_WIDTH keeps the flow
compensation and the runout on a missing width; clogs and breaks are
left to AFC's buffer fault detection (filament_error_sensitivity).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-10-11 20:31:43 +02:00
1 parent e152246e9f
commit b6379621f6
2 files changed
+8 -4
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

macros/print/print_start_end.cfg
+4 -2
View File
@@ -203,8 +203,10 @@ gcode:
_AFC_STORE_HOME_REFERENCE
SET_BDWIDTH NAME=fila_width_0 COMMAND=ENABLE_ALL
# SET_BDWIDTH NAME=fila_width_0 COMMAND=ENABLE_MOTION
# Width only (flow compensation and runout when no filament is measured).
# The CCD motion reading stays at 0 (actual_total_move:0), so motion mode
# (ENABLE_MOTION / ENABLE_ALL) only gives false "Rounout" messages.
SET_BDWIDTH NAME=fila_width_0 COMMAND=ENABLE_WIDTH
_status_printing