PA values per nozzle: SET_NOZZLE, slicer check, no Spoolman write
A PA value only holds for the nozzle it was measured with, so values are saved per nozzle and spool (pa_value_0_4_spool_<id>). SET_NOZZLE sets the fitted size; a different NOZZLE= from the slicer on PRINT_WARMUP stops the print before anything heats. The existing values are copied to 0.4 once at the first start; the old variables stay in the file, unread. Each nozzle has its own test flow and PA range (0.2: 5 mm3/s, 0-0.196, starting estimates, about 9 min a lane). The test primes at the test flow instead of 120 mm3/s. Remove the Spoolman write: it went to localhost and never arrived, and nothing read the values back. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
1dcbc50bf6
commit
b415cbebf4
7 files changed
+108
-133
No files matched your search
@@ -26,6 +26,11 @@ gcode:
|
||||
{% set target_chamber = params.CHAMBER|default("0")|int %}
|
||||
{% set initial_tool = params.TOOL|default("0")|int %}
|
||||
|
||||
# First, so a wrong nozzle stops the print before anything heats
|
||||
{% if params.NOZZLE %}
|
||||
_PA_CHECK_NOZZLE NOZZLE={params.NOZZLE}
|
||||
{% endif %}
|
||||
|
||||
RESET_FAILURE
|
||||
CLEAR_PAUSE
|
||||
_BED_CHECK_RESET
|
||||
|
||||
Reference in new issue
Block a user