PA values per nozzle: SET_NOZZLE, slicer check, no Spoolman write

A PA value only holds for the nozzle it was measured with, so values are
saved per nozzle and spool (pa_value_0_4_spool_<id>). SET_NOZZLE sets the
fitted size; a different NOZZLE= from the slicer on PRINT_WARMUP stops the
print before anything heats. The existing values are copied to 0.4 once at
the first start; the old variables stay in the file, unread.

Each nozzle has its own test flow and PA range (0.2: 5 mm3/s, 0-0.196,
starting estimates, about 9 min a lane). The test primes at the test flow
instead of 120 mm3/s.

Remove the Spoolman write: it went to localhost and never arrived, and
nothing read the values back.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-06 19:49:25 +01:00
1 parent 1dcbc50bf6
commit b415cbebf4
7 files changed
+108 -133

No files matched your search

+5
View File
@@ -26,6 +26,11 @@ gcode:
{% set target_chamber = params.CHAMBER|default("0")|int %}
{% set initial_tool = params.TOOL|default("0")|int %}
# First, so a wrong nozzle stops the print before anything heats
{% if params.NOZZLE %}
_PA_CHECK_NOZZLE NOZZLE={params.NOZZLE}
{% endif %}
RESET_FAILURE
CLEAR_PAUSE
_BED_CHECK_RESET