PA values per nozzle: SET_NOZZLE, slicer check, no Spoolman write

A PA value only holds for the nozzle it was measured with, so values are
saved per nozzle and spool (pa_value_0_4_spool_<id>). SET_NOZZLE sets the
fitted size; a different NOZZLE= from the slicer on PRINT_WARMUP stops the
print before anything heats. The existing values are copied to 0.4 once at
the first start; the old variables stay in the file, unread.

Each nozzle has its own test flow and PA range (0.2: 5 mm3/s, 0-0.196,
starting estimates, about 9 min a lane). The test primes at the test flow
instead of 120 mm3/s.

Remove the Spoolman write: it went to localhost and never arrived, and
nothing read the values back.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-11-06 19:49:25 +01:00
1 parent 1dcbc50bf6
commit b415cbebf4
7 files changed
+108 -133

No files matched your search

@@ -1,7 +0,0 @@
#!/bin/bash
BASE_URL=$1
FIELD=$2
curl -sf -X POST "${BASE_URL}/api/v1/field/spool/${FIELD}" \
-H "Content-Type: application/json" \
-d "{\"name\": \"Pressure Advance\", \"field_type\": \"float\", \"default_value\": \"0\"}" \
> /tmp/pa_setup_result 2>&1
+95 -101
View File
@@ -171,6 +171,9 @@
# To see what's cached, and which lanes are missing a tracked
# spool_id:
# PA_STATUS
#
# After fitting another nozzle (values are saved per nozzle):
# SET_NOZZLE SIZE=0.2
########################################################################
# [save_variables] is defined once in ../save_variables.cfg (shared with Blobifier)
@@ -190,18 +193,24 @@ variable_lane_names: "lane1,lane2,lane3,lane4,lane5"
variable_fallback_nozzle_temp: 260
# bd_pressure PA_CALIBRATE parameters -- tune to your printer/filament.
# See https://pandapi3d.cn/bdpressure/home for guidance on these values.
variable_max_volumetric: 25
# Per nozzle, and only these sizes are accepted by SET_NOZZLE:
# max_volumetric: test flow (mm3/s). The test time follows it: about 2 min a
# lane at 25, 9 min at 5.
# pa_step: PA_CALIBRATE tests 50 values, 0..49 x step (0.002: 0-0.098,
# 0.004: 0-0.196).
# The 0.2 values are starting estimates, not measured yet.
variable_nozzle_test: {"0.4": {"max_volumetric": 25, "pa_step": 0.002}, "0.2": {"max_volumetric": 5, "pa_step": 0.004}}
# Lower test flow (mm3/s) for materials that cannot extrude max_volumetric:
# soft TPU buckles or slips in the extruder at 25. A key contained in the
# lane's material (any case) applies; with several matches the lowest wins.
# lane's material (any case) applies; the lowest of these and the nozzle's
# flow wins.
variable_material_max_volumetric: {"tpu": 8, "tpe": 8, "flex": 8}
variable_acc_wall: 5000
variable_travel_speed: 300
variable_acc_to_decel_factor: 50
# Minimum PA delta before we bother re-saving the cached value
variable_write_threshold: 0.002
# A calibration is rejected (nothing cached or written to Spoolman, the
# previous PA is kept) when:
# A calibration is rejected (nothing saved, the previous PA is kept) when:
# - its result is the last PA_CALIBRATE test value: bdpressure.py found no
# result and left the extruder at the end of its scan (0..49 x the PA
# step: 0.098 at the default step, 0.196 for flexibles),
@@ -209,94 +218,74 @@ variable_write_threshold: 0.002
# - bd_pressure gave fewer than min_points readings or fewer than
# min_distinct different ones (sensor silent or hung; needs
# bdpressure_check.py, otherwise this check is skipped).
variable_pa_step: 0.002 # PA_CALIBRATE tests 50 values: 0..49 x step
# Wider range for materials whose PA can be above 0.098 (soft TPU measured
# 0.094): same 50 lines and test time, coarser steps. Key contained in the
# lane's material (any case); with several matches the largest step wins.
# lane's material (any case); the largest of these and the nozzle's step wins.
variable_material_pa_step: {"tpu": 0.004, "tpe": 0.004, "flex": 0.004}
variable_min_points: 10
variable_min_distinct: 8
# PA applied when a rejected lane has no earlier cached value
variable_fallback_pa: 0.04
# Spoolman URL and the custom "extra" field name used to push calibrated
# PA values back to the spool record (so the value travels with the
# spool, not just with this printer's local save_variables cache).
# Create the field once with: _PA_SETUP_SPOOLMAN_FIELD (see below).
variable_spoolman_url: "http://localhost:7912"
variable_spoolman_field: "pa_value"
gcode: # intentionally empty -- variables only
# ---------------------------------------------------------------------------
# Spoolman write-back: push a calibrated PA value to a spool's "extra"
# field, so the value travels with the spool (e.g. if you move it to a
# different printer, or reinstall save_variables from scratch).
#
# Requires the custom field to exist once -- run _PA_SETUP_SPOOLMAN_FIELD
# (below) a single time, or create it manually:
# curl -X POST http://<spoolman_ip>:7912/api/v1/field/spool/pa_value -H "Content-Type: application/json" -d '{"name": "Pressure Advance", "field_type": "float", "default_value": "0"}'
#
# UNVERIFIED -- needs live testing the same way everything else in this
# file has needed it. In particular: confirm curl and python3 are both
# available in the shell shell_command runs in (they're standard on
# MainsailOS/FluiddOS, but worth confirming), and confirm the merge-write
# below doesn't clobber any other custom Spoolman fields you may have.
# Fitted nozzle. A PA value only holds for the nozzle it was measured with, so
# values are saved per nozzle and spool: pa_value_0_4_spool_15. The size is the
# saved variable pa_nozzle, set by SET_NOZZLE after a swap. The slicer sends the
# size of its profile to PRINT_WARMUP, and a mismatch stops the print before
# anything heats. G-code without a size uses the saved one.
# ---------------------------------------------------------------------------
[gcode_shell_command _pa_write_spoolman]
# HISTORICAL NOTE ON ARGUMENT OFFSET (no longer applicable here, kept
# for context): an earlier version of this command ran the script
# inline via `bash -c '<script>' arg1 arg2 ...`, which makes the FIRST
# argument after the script string become $0 inside the script, not $1
# -- a well-known bash gotcha, confirmed empirically while building
# this file:
# bash -c 'echo "0=$0 1=$1 2=$2"' alpha beta gamma
# -> 0=alpha 1=beta 2=gamma (gamma, the 3rd arg, never reaches $3)
# This command now invokes a real .sh FILE instead (`bash script.sh
# arg1 arg2 ...`), which does NOT have this offset -- $1 really is the
# first argument in that invocation form (also confirmed empirically).
# So RUN_SHELL_COMMAND ... PARAMS="a b c d" maps cleanly to $1-$4 in
# the script with no placeholder needed.
#
# WHY THIS CALLS AN EXTERNAL .sh FILE INSTEAD OF EMBEDDING PYTHON
# INLINE: Klipper's config parser (Python's configparser) requires
# EVERY physical line of a multi-line value to be indented, and strips
# that indentation uniformly before passing the value to the shell.
# Confirmed empirically while building this file: this dedenting
# flattens ALL lines to the same level, which destroys the relative
# indentation Python's try/except blocks need to remain valid syntax --
# there is no way to embed multi-line, block-structured Python directly
# inside a Klipper command: value. Putting the logic in a separate .sh
# file sidesteps this entirely, since that file is never touched by
# Klipper's config parser.
#
# The script ships in this folder (klipper-macros/pressure_advance/bd_pa_write_spoolman.sh);
# install.sh makes it executable.
command: bash ~/printer_data/config/klipper-macros/pressure_advance/bd_pa_write_spoolman.sh
verbose: False
[gcode_shell_command _pa_create_spoolman_field]
# Same reasoning as _pa_write_spoolman above for using an external
# script file -- see the note there. This one has no embedded Python,
# so the only real issue was the closing quote sitting at column 0
# (un-indented), which is also a config parsing error in Klipper's
# parser -- every line of a multi-line value must be indented,
# including the very last line.
command: bash ~/printer_data/config/klipper-macros/pressure_advance/bd_pa_create_spoolman_field.sh
verbose: False
[gcode_macro _PA_SETUP_SPOOLMAN_FIELD]
description: One-time setup -- creates the pa_value custom field in Spoolman
# REQUIRES bd_pa_create_spoolman_field.sh to already exist on disk at
# ~/printer_data/config/ -- see the one-time SSH setup instructions
# given alongside this file. This macro just invokes that script; it
# does not create it.
[gcode_macro SET_NOZZLE]
description: Set the fitted nozzle size, which selects its saved PA values (without SIZE: show it)
# [SIZE=<mm>]
gcode:
{% set cfg = printer["gcode_macro _PA_CFG"] %}
{action_respond_info("Creating Spoolman field '%s' at %s ..." % (cfg.spoolman_field, cfg.spoolman_url))}
RUN_SHELL_COMMAND CMD=_pa_create_spoolman_field PARAMS="{cfg.spoolman_url} {cfg.spoolman_field}"
{action_respond_info("Done. Verify with: curl %s/api/v1/field/spool" % cfg.spoolman_url)}
{% set vars = printer.save_variables.variables %}
{% set current = "%g" % vars["pa_nozzle"]|default(0.4)|float %}
{% if not params.SIZE %}
RESPOND MSG="Nozzle set: {current} mm. Change it with SET_NOZZLE SIZE=<mm>, sizes: {cfg.nozzle_test.keys()|join(', ')}"
{% else %}
{% set size = "%g" % params.SIZE|float %}
{% if size not in cfg.nozzle_test %}
_ERROR MSG="SET_NOZZLE: no PA test settings for {size} mm. Sizes: {cfg.nozzle_test.keys()|join(', ')} (variable_nozzle_test in _PA_CFG)" DISPLAY="Unknown nozzle size"
{% elif printer.print_stats.state in ("printing", "paused") %}
_ERROR MSG="SET_NOZZLE: not during a print, the nozzle stays {current} mm" DISPLAY="No SET_NOZZLE in a print"
{% else %}
SAVE_VARIABLE VARIABLE=pa_nozzle VALUE={size}
RESPOND MSG="Nozzle set: {size} mm (was {current} mm)"
_PA_APPLY_LOADED_LANE
{% endif %}
{% endif %}
[gcode_macro _PA_CHECK_NOZZLE]
description: Stop the print when the size from the slicer is not the fitted nozzle
# NOZZLE=<mm>
gcode:
{% set vars = printer.save_variables.variables %}
{% set fitted = vars["pa_nozzle"]|default(0.4)|float %}
{% set sliced = params.NOZZLE|float %}
{% if (sliced - fitted)|abs > 0.001 %}
_ERROR MSG="Print stopped: sliced for a {'%g' % sliced} mm nozzle, the printer is set to {'%g' % fitted} mm. Slice with the matching profile, or fit that nozzle and run SET_NOZZLE SIZE={'%g' % sliced}" DISPLAY="Nozzle mismatch, print stopped"
{% endif %}
# Once: values saved before there were per-nozzle values were all measured with
# the 0.4 nozzle. Copied at the first start with this macro, so the first print
# does not calibrate every lane again. The old pa_value_spool_<id> lines stay in
# the variables file; nothing reads them any more.
[delayed_gcode _PA_MIGRATE_NOZZLE]
initial_duration: 1
gcode:
{% set vars = printer.save_variables.variables %}
{% if "pa_nozzle" not in vars %}
{% for name, value in vars.items() %}
{% if name.startswith("pa_value_spool_") and ("pa_value_0_4_spool_" ~ name[15:]) not in vars %}
SAVE_VARIABLE VARIABLE={"pa_value_0_4_spool_" ~ name[15:]} VALUE={value}
{% endif %}
{% endfor %}
SAVE_VARIABLE VARIABLE=pa_nozzle VALUE=0.4
RESPOND MSG="PA values moved to the 0.4 mm nozzle. Nozzle set: 0.4 mm"
{% endif %}
# ---------------------------------------------------------------------------
@@ -375,7 +364,7 @@ gcode:
# ---------------------------------------------------------------------------
# PA cache, keyed by spool_id, stored via Klipper's own save_variables.
# PA cache, keyed by nozzle and spool_id, stored via Klipper's own save_variables.
# Requires [save_variables] (save_variables.cfg, see header notes).
#
# IMPORTANT: printer.save_variables.variables is read DIRECTLY inline in
@@ -392,12 +381,13 @@ gcode:
# value set earlier in the same template render.
# ---------------------------------------------------------------------------
[gcode_macro _PA_CACHE_SET]
description: Internal -- stores a PA value for a spool_id
# SPOOL_ID=<int> PA=<float>
description: Internal -- stores a PA value for a nozzle and spool_id
# SPOOL_ID=<int> NOZZLE=<mm> PA=<float>
gcode:
{% set spool_id = params.SPOOL_ID|default(0)|int %}
{% set nozzle = "%g" % params.NOZZLE|float %}
{% set pa = params.PA|default(0.0)|float %}
{% set varname = "pa_value_spool_" ~ spool_id %}
{% set varname = "pa_value_" ~ nozzle|replace(".", "_") ~ "_spool_" ~ spool_id %}
SAVE_VARIABLE VARIABLE={varname} VALUE={pa}
@@ -418,7 +408,8 @@ gcode:
{% set force = params.FORCE|default(0)|int %}
{% set vars = printer.save_variables.variables %}
{% set spool_id = vars["pa_lane_" ~ lane ~ "_spool_id"]|default(0)|int %}
{% set cached = ("pa_value_spool_" ~ spool_id) in vars %}
{% set nozzle = "%g" % vars["pa_nozzle"]|default(0.4)|float %}
{% set cached = ("pa_value_" ~ nozzle|replace(".", "_") ~ "_spool_" ~ spool_id) in vars %}
{% set key = "AFC_stepper " ~ lane %}
{% set afc_spool = printer[key].spool_id|default(none, true) if key in printer else none %}
{% if lane and spool_id > 0 and (force or not cached) and afc_spool %}
@@ -443,12 +434,14 @@ gcode:
{% elif spool_id == 0 %}
{action_respond_info("LANE_CALIBRATE_PA: no spool_id recorded for %s yet. Run SET_SPOOL_ID LANE=%s SPOOL_ID=<id> then _PA_TRACK_LANE_SPOOL LANE=%s SPOOL_ID=<id>." % (lane, lane, lane))}
{% else %}
{% set pa_varname = "pa_value_spool_" ~ spool_id %}
{% set nozzle = "%g" % vars["pa_nozzle"]|default(0.4)|float %}
{% set test = cfg.nozzle_test[nozzle] %}
{% set pa_varname = "pa_value_" ~ nozzle|replace(".", "_") ~ "_spool_" ~ spool_id %}
{% set cache_found = pa_varname in vars %}
{% set cached_pa = vars[pa_varname]|float if cache_found else 0.0 %}
{% if cache_found and force == 0 %}
{action_respond_info("Using cached PA=%.4f for %s (spool %d)" % (cached_pa, lane, spool_id))}
{action_respond_info("Using cached PA=%.4f for %s (spool %d, %s mm nozzle)" % (cached_pa, lane, spool_id, nozzle))}
SET_PRESSURE_ADVANCE ADVANCE={cached_pa}
{% else %}
CHANGE_TOOL LANE={lane}
@@ -462,21 +455,21 @@ gcode:
{% set target = printer.extruder.target|default(0)|float %}
{% set nozzle_temp = lane_temp if lane_temp > 0 else (target if target > 0 else cfg.fallback_nozzle_temp|float) %}
{% set material = lane_obj.material|default("", true)|string|lower %}
{% set vol = namespace(max=cfg.max_volumetric|float) %}
{% set vol = namespace(max=test.max_volumetric|float) %}
{% for key, flow in cfg.material_max_volumetric.items() %}
{% if key in material and flow|float < vol.max %}
{% set vol.max = flow|float %}
{% endif %}
{% endfor %}
{% set step = namespace(pa=cfg.pa_step|float) %}
{% set step = namespace(pa=test.pa_step|float) %}
{% for key, s in cfg.material_pa_step.items() %}
{% if key in material and s|float > step.pa %}
{% set step.pa = s|float %}
{% endif %}
{% endfor %}
{action_respond_info("Calibrating PA for %s (spool %d) at %.0fC, %g mm3/s, PA 0-%.3f..." % (lane, spool_id, nozzle_temp, vol.max, 49 * step.pa))}
{action_respond_info("Calibrating PA for %s (spool %d, %s mm nozzle) at %.0fC, %g mm3/s, PA 0-%.3f..." % (lane, spool_id, nozzle, nozzle_temp, vol.max, 49 * step.pa))}
M117 Calibrating PA: {lane}
G1 Z50 F3000
@@ -505,7 +498,7 @@ gcode:
# triggered (and its own template is rendered), PA_CALIBRATE
# above has already finished and printer.extruder.pressure_advance
# is current.
_PA_AFTER_CALIBRATE LANE={lane} SPOOL_ID={spool_id} CACHE_FOUND={1 if cache_found else 0} CACHED_PA={cached_pa} SWEEP_END={49 * step.pa}
_PA_AFTER_CALIBRATE LANE={lane} SPOOL_ID={spool_id} NOZZLE={nozzle} CACHE_FOUND={1 if cache_found else 0} CACHED_PA={cached_pa} SWEEP_END={49 * step.pa}
BLOBIFIER_CLEAN
G4 P400
G1 Z10 F3000
@@ -516,14 +509,15 @@ gcode:
[gcode_macro _PA_AFTER_CALIBRATE]
description: Internal -- runs immediately after PA_CALIBRATE completes; reads the fresh PA value and caches it
# LANE=<lane_name> SPOOL_ID=<int> CACHE_FOUND=<0|1> CACHED_PA=<float> SWEEP_END=<last PA tested>
# LANE=<lane_name> SPOOL_ID=<int> NOZZLE=<mm> CACHE_FOUND=<0|1> CACHED_PA=<float> SWEEP_END=<last PA tested>
gcode:
{% set lane = params.LANE|default("")|string %}
{% set spool_id = params.SPOOL_ID|default(0)|int %}
{% set cache_found = params.CACHE_FOUND|default(0)|int %}
{% set cached_pa = params.CACHED_PA|default(0.0)|float %}
{% set cfg = printer["gcode_macro _PA_CFG"] %}
{% set sweep_end = params.SWEEP_END|default(49 * cfg.pa_step|float)|float %}
{% set sweep_end = params.SWEEP_END|float %}
{% set nozzle = "%g" % params.NOZZLE|float %}
# This template is evaluated only once this macro is actually
# triggered -- which happens after PA_CALIBRATE (queued earlier by
@@ -556,16 +550,14 @@ gcode:
_WARN MSG="PA calibration for {lane} (spool {spool_id}) rejected: {problems|join('; ')}. Nothing saved; using PA={'%.4f' % keep} ({'cached' if use_cache else 'fallback'}). Fix the cause, then LANE_CALIBRATE_PA LANE={lane} FORCE=1" DISPLAY="PA cal rejected: {lane}, see console"
SET_PRESSURE_ADVANCE ADVANCE={keep}
{% else %}
{action_respond_info("Calibration complete for %s: PA=%.4f" % (lane, new_pa))}
{action_respond_info("Calibration complete for %s (%s mm nozzle): PA=%.4f" % (lane, nozzle, new_pa))}
M117 PA cal done: {new_pa|round(4)}
{% set delta = (new_pa - cached_pa)|abs if cache_found else 999 %}
{% if delta > cfg.write_threshold|float %}
_PA_CACHE_SET SPOOL_ID={spool_id} PA={new_pa}
{action_respond_info("Writing PA=%.4f to Spoolman spool %d" % (new_pa, spool_id))}
RUN_SHELL_COMMAND CMD=_pa_write_spoolman PARAMS="{spool_id} {cfg.spoolman_url} {cfg.spoolman_field} {new_pa}"
_PA_CACHE_SET SPOOL_ID={spool_id} NOZZLE={nozzle} PA={new_pa}
{% else %}
{action_respond_info("PA change below threshold (%.4f), skipping cache/Spoolman write" % cfg.write_threshold|float)}
{action_respond_info("PA change below threshold (%.4f), keeping the saved value" % cfg.write_threshold|float)}
{% endif %}
{% endif %}
@@ -691,14 +683,15 @@ gcode:
{% set spool_id = vars[lane_varname]|default(0)|int if lane_varname in vars else 0 %}
{% if spool_id > 0 %}
{% set pa_varname = "pa_value_spool_" ~ spool_id %}
{% set nozzle = "%g" % vars["pa_nozzle"]|default(0.4)|float %}
{% set pa_varname = "pa_value_" ~ nozzle|replace(".", "_") ~ "_spool_" ~ spool_id %}
{% if pa_varname in vars %}
{% set cached_pa = vars[pa_varname]|float %}
SET_PRESSURE_ADVANCE ADVANCE={cached_pa}
{action_respond_info("Lane %s loaded: applied cached PA=%.4f (spool %d)" % (lane, cached_pa, spool_id))}
{action_respond_info("Lane %s loaded: applied cached PA=%.4f (spool %d, %s mm nozzle)" % (lane, cached_pa, spool_id, nozzle))}
M117 PA: {lane} = {cached_pa|round(4)}
{% else %}
{action_respond_info("Lane %s loaded: spool %d has no cached PA yet. Run LANE_CALIBRATE_PA LANE=%s or PA_CALIBRATE_ALL_LANES." % (lane, spool_id, lane))}
{action_respond_info("Lane %s loaded: spool %d has no PA for the %s mm nozzle yet, PA stays %.4f. Run LANE_CALIBRATE_PA LANE=%s or PA_CALIBRATE_ALL_LANES; a print start does this itself." % (lane, spool_id, nozzle, printer.extruder.pressure_advance|float, lane))}
{% endif %}
{% else %}
{action_respond_info("Lane %s loaded: no spool_id recorded yet (run SET_SPOOL_ID first)." % lane)}
@@ -726,15 +719,16 @@ gcode:
{% set cfg = printer["gcode_macro _PA_CFG"] %}
{% set lane_list = cfg.lane_names.split(",") %}
{% set vars = printer.save_variables.variables %}
{% set nozzle = "%g" % vars["pa_nozzle"]|default(0.4)|float %}
{action_respond_info("=== PA Status ===")}
{action_respond_info("=== PA Status, %s mm nozzle ===" % nozzle)}
{% for lane in lane_list %}
{% set lane = lane.strip() %}
{% if lane != "" %}
{% set spool_varname = "pa_lane_" ~ lane ~ "_spool_id" %}
{% set spool_id = vars[spool_varname]|default(0)|int if spool_varname in vars else 0 %}
{% if spool_id > 0 %}
{% set pa_varname = "pa_value_spool_" ~ spool_id %}
{% set pa_varname = "pa_value_" ~ nozzle|replace(".", "_") ~ "_spool_" ~ spool_id %}
{% if pa_varname in vars %}
{action_respond_info(" %s (spool %d): PA=%.4f cached" % (lane, spool_id, vars[pa_varname]|float))}
{% else %}
@@ -1,22 +0,0 @@
#!/bin/bash
SPOOL_ID=$1
BASE_URL=$2
FIELD=$3
PA_VALUE=$4
CURRENT=$(curl -sf "${BASE_URL}/api/v1/spool/${SPOOL_ID}" 2>/dev/null)
EXTRA=$(echo "$CURRENT" | python3 -c "
import sys, json
try:
d = json.load(sys.stdin)
e = d.get('extra', {})
e['$FIELD'] = '$PA_VALUE'
print(json.dumps(e))
except Exception:
print(json.dumps({'$FIELD': '$PA_VALUE'}))
" 2>/dev/null)
if [ -z "$EXTRA" ]; then
EXTRA="{\"$FIELD\": \"$PA_VALUE\"}"
fi
curl -sf -X PATCH "${BASE_URL}/api/v1/spool/${SPOOL_ID}" \
-H "Content-Type: application/json" \
-d "{\"extra\": $EXTRA}" > /tmp/pa_spoolman_write_result 2>&1
+3 -1
View File
@@ -117,7 +117,9 @@ gcode:
G21
M83
M109 S{NOZZLE_TEMP}
G1 E4
# At the test flow. Without F this ran at the speed of the move before
# (F3000 in LANE_CALIBRATE_PA: 120 mm3/s), too much for a small nozzle.
G1 E4 F{MAX_VOLUMETRIC / 2.405 * 60}
SET_PRESSURE_ADVANCE ADVANCE=0.04; Override pressure advance value
SET_VELOCITY_LIMIT ACCEL={ACC_WALL} ACCEL_TO_DECEL={ACC_TO_DEC}
SET_VELOCITY_LIMIT ACCEL={ACC_WALL} MINIMUM_CRUISE_RATIO={MIN_CRUISE}
+5
View File
@@ -26,6 +26,11 @@ gcode:
{% set target_chamber = params.CHAMBER|default("0")|int %}
{% set initial_tool = params.TOOL|default("0")|int %}
# First, so a wrong nozzle stops the print before anything heats
{% if params.NOZZLE %}
_PA_CHECK_NOZZLE NOZZLE={params.NOZZLE}
{% endif %}
RESET_FAILURE
CLEAR_PAUSE
_BED_CHECK_RESET