TOUCH_COMPARE: Beacon contact vs bd_pressure touch (extras/bdp_touch.py)
bd_pressure's endstop output is not wired, so BDP_TOUCH lowers the nozzle in small steps and reads the force after each one, up to a force limit (default 80) or 0.4 mm below the start, then lifts back. It reports the threshold height and the zero-force height from a line fit and logs the curve to klippy.log. TOUCH_COMPARE heats the nozzle to 150C, homes, and alternates Beacon's contact probe with BDP_TOUCH at one spot, reporting mean, spread and range of each and of the difference. Refuses while the bdp_guard is armed or the sensor is in PA mode. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
13e49e43c7
commit
b16961dba3
4 files changed
+306
No files matched your search
@@ -50,3 +50,4 @@
|
||||
# LEDs and sensors
|
||||
[include leds/stealthburner_leds.cfg]
|
||||
[include sensors/motion_sensor.cfg]
|
||||
[include sensors/touch_compare.cfg] # TOUCH_COMPARE: Beacon contact vs bd_pressure (needs extras/bdp_touch.py)
|
||||
Reference in new issue
Block a user