mangavalk/klipper-macros
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Stop using bdwidth while printing, work without it

Browse Source 
bdwidth's motion reading stays at 0, its per-reading width compensation
made the flow jump between 77 and 119%, and a USB dropout shut down
Klipper. PRINT_START no longer enables it. _PRINT_CLEANUP,
BLOBIFIER_CHECKED and PURGE_UNTIL_EMPTY only send bdwidth commands when
[bdwidth fila_width_0] exists, and bdwidth_status reports present: False
with neutral values when it is not configured, so the section can be
removed from printer.cfg.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
mangavalkandClaude Opus 5.5 committed 2026-10-12 18:18:40 +02:00
1 parent 76172fbc4f
commit 93f00c87a7
6 files changed
+28 -14
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

macros/afc/purge_until_empty.cfg
+1 -1
View File
@@ -73,7 +73,7 @@ gcode:
RESPOND MSG="PURGE_UNTIL_EMPTY: unsyncing {printer.AFC.current_load} from the extruder (UNSET_LANE_LOADED)"
UNSET_LANE_LOADED
{% endif %}
{% set bdw = printer.bdwidth_status.name if 'bdwidth_status' in printer else '' %}
{% set bdw = printer.bdwidth_status.name if 'bdwidth_status' in printer and printer.bdwidth_status.present|default(true) else '' %}
{% set runout_was = 1 if bdw and printer.bdwidth_status.enabled else 0 %}
{% if runout_was %}
RESPOND MSG="PURGE_UNTIL_EMPTY: bdwidth runout response off during the purges"